Dell EMC OpenManage Enterprise-Modular Edition Version 1.20.00 for PowerEdge MX7000 Chassis Release Notes June 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 -2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Release summary............................................................................................................ 5 Chapter 2: Compatibility................................................................................................................. 6 Supported systems................................................................................................................................................................6 Supported web browsers.........................
Chapter 10: Contacting Dell EMC....................................................................................................
1 Release summary The Dell EMC OpenManage Enterprise - Modular is a system management hardware and software solution for managing the Dell EMC PowerEdge MX7000 chassis. Version 1.20.00 Release date June 2020 Priority and recommendations RECOMMENDATION: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that help keep your system software current and compatible with other system modules (firmware, BIOS, drivers, and software).
2 Compatibility Topics: • • Supported systems Supported web browsers Supported systems Chassis • Dell PowerEdge MX7000 Sleds • • • Dell PowerEdge MX740c Dell PowerEdge MX840c Dell PowerEdge MX5016s I-O Modules • • • • • • • PowerEdge MX 25Gb — Ethernet Pass-Through Module PowerEdge MX 10GBASE-T — Ethernet Pass-Through Module PowerEdge MX5000s — SAS Switch Dell EMC MX9116n — Fabric Switching Engine Dell EMC MX7116n — Fabric Expander Module Dell EMC MX5108n — Ethernet Switch Dell EMC MXG610s — Fibre Ch
3 New and enhanced features This release of OME-Modular supports: • • • • • • • • • • • • • • Deploying templates on empty slots or slots that compute sleds occupy. Reclaiming MAC identities after removing profiles that are associated with blade servers. Synchronizing VLAN definitions of OME-Modular and OpenManage Enterprise. Alert notifications when a chassis is onboarded. Configuring Forward Error Correction (FEC) for SmartFabrics. Propagating VLANs without server reboot.
4 Fixes Topics: • • • • • • • • • Firmware rollback for compute device components on member chassis Blank service tags for IOMs Logging in to OME-Modular web interface after factory reset Template deployment configuration job for sled HTTPS custom port in OME-Modular Network IOM inventory Member chassis storage sled inventory for all drives Identity pool options in Edit Network view and during deployment Sub system health and inventory calls for compute sleds Firmware rollback for compute device component
HTTPS custom port in OME-Modular Fixed an issue that was causing the automatic redirection to HTTPS custom port to fail after updating the OME-Modular firmware. Tracking number 146489 Network IOM inventory Fixed an issue that was causing OME-Modular to take about 30 minutes to fetch inventory data when a new network IOM was inserted into a chassis and the inventory was not refreshed.
5 Important Notes Topics: • • • Keywords Security Ethernet Switch firmware update Keywords From OME-Modular version 1.
6 Known issues Topics: • • • • • • • • Deployment and Configuration Job created multiple times for some sleds during Quick Deploy and Attach operation for sleds Error while assigning identities Advanced Filter option not working in Audit Logs Disabled NPAR NIC partitions enabled and listed in iDRAC and operating system after template deployment Reclaim identities task fails Devices duplicated or missing in list fetched using /api/DeviceService/Devices Error encountered in member chassis after downgrading t
Disabled NPAR NIC partitions enabled and listed in iDRAC and operating system after template deployment Description A reference template, containing configuration changes for BIOS, NIC, and iDRAC was deployed on compute sleds in the chassis. The NIC configuration is N-PAR enabled. The first NIC partition is enabled, the second partition is enabled with FCoE, while the third and fourth partitions are disabled for A and B Fabric.
Operating system display menu and iDRAC screen cropped when chassis is connected to 17 or 19inch monitors Description When the system is set to legacy BIOS mode, the initial BIOS boot screen that is rendered with resolution 720x400@70Hz is distorted. The distortion is due to a mismatch in aspect ratio in lower-end monitors of 17 or 19 inches. Workaround Set the system to UEFI mode for the BIOS screens to display correctly.
7 Limitations 1. OME–Modular is supported only on TLS 1.2 and later. Versions earlier than 1.2 may or may not work. Also, support for earlier versions of TLS is not provided. 2. When going to the console for the first time, a blinking cursor is not displayed in the text fields. This is owing to an issue in Chrome. For details and status, see bugs.chromium.org/p/chromium/issues/detail?id=740652. 3.
8 Installation See the Dell EMC OpenManage Enterprise - Modular Edition Version 1.20.00 for PowerEdge MX Chassis User's Guide for the following information: • • • • Prerequisites Hardware and software requirements Installation and configuration Updating MX7000 components using OME-Modular 1.20.00 Topics: • • Downloading OME-Modular firmware Updating firmware in OME-Modular Downloading OME-Modular firmware To download the latest OME–Modular firmware: 1. Go to dell.com/support. 2.
9 Resources and support For more information about the features of this release, see the documentation for OpenManage Enterprise Modular (OME-Modular) available at https://www.dell.com/openmanagemanuals. Latest Release Notes To access the latest Release Notes for this version: 1. 2. 3. 4. Go to https://www.dell.com/openmanagemanuals. Click Dell OpenManage Enterprise. Click the link for this version of OME-Modular. Click DOCUMENTATION.
10 Contacting Dell EMC NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell EMC product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell EMC for sales, technical support, or customer service issues, see https:// www.dell.com/contactdell.