Dell EMC PowerEdge M640p Technical Specifications July 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2017 - 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Dell EMC PowerEdge M640 overview................................................................................4 Chapter 2: Technical specifications.................................................................................................. 5 System dimensions................................................................................................................................................................5 System weight..................................................
1 Dell EMC PowerEdge M640 overview The Dell EMC PowerEdge M640 is a half-height server module supported on the PowerEdge VRTX enclosure and supports up to: • • • Two Intel Xeon scalable processors Two 2.5-inch hard drives/SSDs 16 DIMMs NOTE: All instances of SAS, SATA hard drives and SSDs are referred to as drives in this document, unless specified otherwise.
2 Technical specifications Topics: • • • • • • • • • • • • System dimensions System weight Processor specifications Supported operating systems System battery specifications Memory specifications Mezzanine card specifications Storage controller specifications Drive specifications Ports and connectors specifications Video specifications Environmental specifications System dimensions Figure 1. System dimensions Table 1.
Processor specifications The PowerEdge M640 system supports up to two Intel Xeon Processor Scalable processors up to 28 cores per processor. Supported operating systems The PowerEdge FC640 supports the follow operating systems: • • • • • • RedHat Enterprise Linux Server SUSE Linux Enterprise Server Microsoft Windows Server VMware Citrix Xen Server Canonical Ubuntu LTS For more information, go to www.dell.com/ossupport System battery specifications The PowerEdge M640 system supports CR 2032 3.
Hard drives The PowerEdge M640 system supports up to two 2.5-inch, hot-swappable SAS/SATA hard drives, SSDs, or PCIe NVMe drives. Ports and connectors specifications USB ports The PowerEdge M640 system supports: • • • One USB 3.0-compliant port on the front of the system One micro USB/iDRAC direct USB 2.0-compliant port on the front of the system One USB 3.0-compliant internal port NOTE: The micro USB 2.0-compliant port on the front of the system can only be used as an iDRAC Direct or a management port.
Table 6. Relative humidity specifications Relative humidity Specifications Storage 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be non-condensing at all times. Operating 10% to 80% relative humidity with 26°C (78.8°F) maximum dew point. Table 7. Maximum vibration specifications Maximum vibration Specifications Operating 0.26 Grms at 5 Hz to 350 Hz (all operation orientations). Storage 1.87 Grms at 10 Hz to 500 Hz for 15 min (all six sides tested). Table 8.
Table 11. Particulate contamination specifications (continued) Particulate contamination Specifications Conductive dust Air must be free of conductive dust, zinc whiskers, or other conductive particles. NOTE: This condition applies to data center and non-data center environments. Corrosive dust • • Air must be free of corrosive dust. Residual dust present in the air must have a deliquescent point less than 60% relative humidity.
Expanded operating temperature restrictions The expanded operating temperature restrictions for the PowerEdge M640 system are listed here: • • • • • • • Do not perform a cold startup below 5°C. The operating temperature specified is for a maximum altitude of 3048 metres (10,000 feet ). NVME drives are not supported. AEP DIMMs are not supported. 105 W/4 C, 115 W/6 C, 130 W/8 C, 140 W/14 C or higher wattage processor (TDP > 140 W) are not supported. NEBS SKU processors higher than 85 W are not supported.
Table 15.
3 Documentation resources This section provides information about the documentation resources for your system. To view the document that is listed in the documentation resources table: • From the Dell EMC support site: 1. Click the documentation link that is provided in the Location column in the table. 2. Click the required product or product version. NOTE: To locate the product name and model, see the front of your system. • 3. On the Product Support page, click Manuals & documents.
Table 16. Additional documentation resources for your system (continued) Task Document Location For information about setting up, using, and troubleshooting OpenManage, see the Dell OpenManage Server Administrator User’s Guide. www.dell.com/openmanagemanuals > OpenManage Server Administrator For information about installing, using, and troubleshooting Dell OpenManage Essentials, see the Dell OpenManage Essentials User’s Guide. www.dell.
4 Getting help Topics: • • • • • Contacting Dell EMC Documentation feedback Accessing system information by using QRL Receiving automated support with SupportAssist Recycling or End-of-Life service information Contacting Dell EMC Dell EMC provides several online and telephone based support and service options. If you do not have an active internet connection, you can find contact information about your purchase invoice, packing slip, bill, or Dell EMC product catalog.
• • Your system service tag to quickly access your specific hardware configuration and warranty information A direct link to Dell to contact technical assistance and sales teams Steps 1. Go to www.dell.com/qrl and navigate to your specific product or 2. Use your smartphone or tablet to scan the model-specific Quick Resource (QR) code on your system or in the Quick Resource Locator section. Quick Resource Locator for PowerEdge M640 system Figure 2.