Reference Guide

ManualsBrandsDell ManualsC SeriesPowerEdge FC430

03 - 2016

Statement of Volatility – Dell PowerEdge FC430

Dell PowerEdge FC430 contains both volatile and non-volatile (NV) components. Volatile components lose their

data immediately upon removal of power from the component. Non-volatile components continue to retain their

data even after the power has been removed from the component. Components chosen as user-definable

configuration options (those not soldered to the motherboard) are not included in the Statement of Volatility.

Configuration option information (pertinent to options such as microprocessors, remote access controllers, and

storage controllers) is available by component separately. The following NV components are present in the

PowerEdge FC430 server.

Item

Non-Volatile

or Volatile

Quantity

Reference Designator

Size

Planer

PCH Internal CMOS

RAM

Volatile

U_WBG

256 Bytes

BIOS SPI Flash

Non-Volatile

U_SPI_BIOS1

8 MB

iDRAC SPI Flash

Non-Volatile

U_IDRAC_SPI1

4 MB

BMC EMMC

Non-Volatile

U_EMMC1

2 GB

BMC Memory

Volatile

U_IDRAC_MEM

2 Gb

CPU Vcore and

Memory regulator

Non-Volatile

PU51, PU66, PU58, PU76

System CPLD

Non-Volatile

U_CPLD

2210 logic elements

1700 macrocells

272 IOs

System Memory

Volatile

Up to 6

per CPU

CPU1: DIMM1~DIMMA4,

CPU2: DIMM7~DIMMB4

Up to 32 GB per DIMM

FC430 1x1.8" SATA

Backplane

SEP internal flash

Non-Volatile

U_SEP1

Flash: 32 KB

EEPROM: 16 KB

FC430 2x1.8" SATA

Backplane

SEP internal flash

Non-Volatile

U_SEP1

Flash: 32 KB

EEPROM:1 KB

Summary of content (4 pages)

PAGE 1
Statement of Volatility – Dell PowerEdge FC430 Dell PowerEdge FC430 contains both volatile and non-volatile (NV) components. Volatile components lose their data immediately upon removal of power from the component. Non-volatile components continue to retain their data even after the power has been removed from the component. Components chosen as user-definable configuration options (those not soldered to the motherboard) are not included in the Statement of Volatility.
PAGE 2
Item Volatile or NonVolatile Quantity Reference designator Size IDSDM SPI flash Non-Volatile 1 U5 8 Mb rSPI Flash Non-Volatile 1 U15 4 MB Non-Volatile 1 U15 4 MB i350 SPI EEPROM Non-Volatile 1 U1 512 KB Flash Non-Volatile 1 U4 8 Mb Non-Volatile 1 U5 16 Mb Planner IDSDM card vFlash Card rSPI Flash 1G LOM Riser Card 10 G LOM Riser card Broadcom SPI flash Item Type (e.g.
PAGE 3
Item Type (e.g. Flash PROM, EEPROM) Can user programs or operating system write data to it during normal operation? Purpose? (e.g. boot code) CPU Vcore and VSA Regulators NVRAM No CPU Vcore and Memory controller System CPLD RAM Flash Yes Power sequence controller and detection System Memory RAM Yes System OS RAM Yes Backplane controller FC430 1x 1.8-inch SATA Backplane SEP internal flash Integrated Flash + EEPROM FC430 2x 1.
PAGE 4
Item How is data input to this memory? How is this memory write protected? PCH Internal CMOS RAM BIOS J_NVRAM_CLR jumper BIOS SPI Flash SPI interface via PCH Software write protected iDRAC SPI Flash SPI interface via iDRAC Software write protected BMC EMMC NAND Flash interface via iDRAC Embedded FW write protected BMC Memory Memory interface via iDRAC Not applicable CPU Vcore and VSA Regulators OTP (one time programmable) Not accessible System CPLD System OS RAM System OS System Memo