Dell EMC PowerEdge C6400 Technical Specifications Regulatory Model: E43S Series Regulatory Type: E43S001
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2017 - 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Dell EMC PowerEdge C6400 overview...........................................................................................................4 2 Technical specifications................................................................................................................................. 5 Dimensions of the Dell EMC PowerEdge C6400 enclosure......................................................................................... 6 Chassis weight...........................................
1 Dell EMC PowerEdge C6400 overview The PowerEdge C6400 is an ultra-dense 2U enclosure that can support up to four independent two-socket (2S) sleds. The PowerEdge C6400 enclosure supports the following drive configurations: • up to 24 x 2.5-inch SAS or SATA drives • up to 8 x 2.5-inch NVMe drives, with 16 x 2.5-inch SAS or SATA drives • up to 12 x 3.
2 Technical specifications The technical and environmental specifications of your system are outlined in this section.
Dimensions of the Dell EMC PowerEdge C6400 enclosure Figure 1. Dimensions of PowerEdge C6400 enclosure Table 1. Dimensions of the PowerEdge C6400 enclosure Xa Xb 482.6 mm (19 inches) 448 mm (17.63 inches) Y Za Zb Zc 86.8 mm (3.41 inches) 26.8 mm (1.05 inches) 763.2 mm (30.28 inches) 797.3 mm (31.38 inches) Chassis weight Table 2. Chassis weight of the Dell EMC PowerEdge C6400 enclosure with PowerEdge C6420 sleds System Maximum weight (with all sleds and drives) 12 x 3.
Supported operating systems The Dell EMC PowerEdge C6400 supports the following operating systems: • Canonical Ubuntu LTS • Citrix XenServer • Microsoft Windows Server with Hyper-V • Red Hat Enterprise Linux • SUSE Linux Enterprise Server • VMware ESXi NOTE: For more information about the specific versions and additions, see https://www.dell.com/support/home/drivers/ supportedos/poweredge-c6400 PSU specifications The Dell EMC PowerEdge C6400 enclosure supports two AC power supply units (PSUs).
Chassis management board specifications Figure 2.
Maximum number of drives in the enclosure Maximum number of drives assigned per sled Micro-SD card (optional) for boot (up to 64 GB) One on each PCIe riser of each sled Table 5. Supported RAID options with M.2 SATA drives Options Single M.2 SATA drive without RAID Dual M.2 SATA drives with hardware RAID Hardware RAID No Yes RAID Mode N/A RAID 1 Number of drives supported 1 2 Supported CPUs CPU 1 CPU 1 and CPU 2 Midplane specifications Figure 3.
Standard operating temperature specifications NOTE: 1 Not available: Indicates that the configuration is not offered by Dell EMC. 2 Not supported: Indicates that the configuration is not thermally supported. NOTE: All components including the DIMMs, communication cards, M.
TDP Watts 165 W 150 W Max memor y/ proces sor 12x Drives CPU2: V2DRD CPU2: 8 ted(6° rted(1 C) 4°C) 8276 CPU1: JYKMM | CPU2: V2DRD Processo Heat sink r model model 3.5-inch chassis No-BP Chassis 2.
TDP Watts 125 W 115 W 12 Processo Heat sink r model model Max memor y/ proces sor 3.5-inch chassis 12x Drives No-BP Chassis 2.
TDP Watts Processo Heat sink r model model 3.5-inch chassis No-BP Chassis 2.
TDP Watts 70 W Processo Heat sink r model model Max memor y/ proces sor 3.5-inch chassis No-BP Chassis 2.
TDP Watts 150 W 125W Processor model Max Heat sink memor y/ model process or 8276M CPU1: JYKMM 8260 3.5-inch chassis 12x Drive s No-BP Chassis 2.
TDP Watts 115 W Processor model Max Heat sink memor y/ model process or 5217 CPU1: FMM2M 5218T 85 W 70 W 16 4x Drives N/A CPU1: 6 30 35 35 35 35 35 35 35 35 35 CPU1: FMM2M CPU1: 6 30 35 35 35 35 35 35 35 35 35 5218N CPU1: FMM2M CPU1: 6 30 35 35 35 35 35 35 35 35 35 5222 CPU1: FMM2M CPU1: 6 30 35 35 35 35 35 35 35 35 35 8256 CPU1: FMM2M CPU1: 6 30 35 35 35 35 35 35 35 35 35 4216 CPU1: JYKMM CPU1: 8 30 35 35 35 35 35 35 35 35 35
Table 9. Configuration Restrictions with Mellanox Navi Dual Port Card with Active (Optical) connectivity TDP Watts 3.5-inch chassis No-BP Chassis 2.
TDP Watts 3.5-inch chassis No-BP Chassis 2.
TDP Watts 3.5-inch chassis No-BP Chassis 2.
Operating temperature derating specifications Table 13. Operating temperature Operating temperature derating Specifications < 35°C (95°F) Maximum temperature is reduced by 1°C/300 m (1°F/547 ft) above 950 meters (3,117 ft). 35°C–40°C (95°F–104°F) Maximum temperature is reduced by 1°C/175 m (1°F/319 ft) above 950 meters (3,117 ft). > 45°C (113°F) Maximum temperature is reduced by 1°C/125 m (1°F/228 ft) above 950 meters (3,117 ft). Relative humidity specifications Table 14.
Particulate and gaseous contamination specifications Table 16. Particulate contamination specifications Particulate contamination Specifications Air filtration Data center air filtration as defined by ISO Class 8 per ISO 14644-1 with a 95% upper confidence limit. NOTE: This condition applies only to data center environments. Air filtration requirements do not apply to IT equipment designed to be used outside a data center, in environments such as an office or factory floor.
Maximum shock specifications Table 19. Maximum shock specifications Maximum shock Specifications Operating 24 executed shock pulses 6 G in the positive and negative x, y, z axis for up to 11 ms (four pulses on each side of the system). Storage Six consecutively executed shock pulses of 71 G in the positive and negative x, y, z axes for up to 2 ms (one pulse on each side of the system). Maximum altitude specifications Table 20.
3 Documentation resources This section provides information about the documentation resources for your system. To view the document that is listed in the documentation resources table: • From the Dell EMC support site: a Click the documentation link that is provided in the Location column in the table. b Click the required product or product version. NOTE: To locate the product name and model, see the front of your system. c • On the Product Support page, click Manuals & documents.
Task Document Location Managing your system For information about systems management Dell.com/poweredgemanuals software offered by Dell, see the Dell OpenManage Systems Management Overview Guide. For information about setting up, using, and troubleshooting OpenManage, see the Dell OpenManage Server Administrator User’s Guide. Dell.
4 Getting help Topics: • Contacting Dell EMC • Documentation feedback • Accessing system information by using QRL • Receiving automated support with SupportAssist • Recycling or End-of-Life service information Contacting Dell EMC Dell EMC provides several online and telephone based support and service options. If you do not have an active internet connection, you can find contact information about your purchase invoice, packing slip, bill, or Dell EMC product catalog.
The QRL includes the following information about your system: • How-to videos • Reference materials, including the Installtion and Service Manual, LCD diagnostics, and mechanical overview • Your system service tag to quickly access your specific hardware configuration and warranty information • A direct link to Dell to contact technical assistance and sales teams Steps 1 Go to Dell.
