Dell USB-C Monitor P2219HC/P2419HC/P2719HC User’s Guide Model: P2219HC/P2419HC/P2719HC Regulatory model: P2219HCb/P2419HCb/P2719HCt
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2018-2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
Contents About Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Identifying Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Always On USB Type-C Charging . . . . . . . . . . . . . . . . . . . . . . . . .
About Your Monitor Package Contents Your monitor ships with the components shown below. Make sure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
USB Type-C cable (C to C) DP cable Cable Tie • Quick Setup Guide • Safety,Environmental,and Regulatory Information Product Features The Dell P2219HC/P2419HC/P2719HC monitor has an active matrix, thinfilm transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: • P2219HC: 54.6 cm (21.5-inch) viewable area display (measured diagonally). 1920 x 1080 resolution with full-screen support for lower resolutions. • P2419HC: 60.5 cm (23.
• • • • Stand lock. Energy Gauge shows the energy level being consumed by the monitor in real time. Arsenic-free glass and Mercury-free for the panel only. ≤ 0.3 W in Standby Mode.
Back View Label Description 1 VESA mounting holes (100 Wall mount monitor using VESA-compatible wall mm x 100 mm - behind mount kit (100 mm x 100 mm). attached VESA Cover) 2 Regulatory label Lists the regulatory approvals. 3 Stand release button Releases stand from the monitor. 4 Security lock slot Secures monitor with security lock (sold separately). 5 Barcode, serial number, and Service Tag label Refer to this label if you need to contact Dell for technical support.
Side View Label Description 1 USB downstream ports (2) Connect your USB device. NOTE: You can only use this connector after you have connected the USB Type-C cable to the computer and USB Type-C connector on the monitor.
Bottom View Label Description Use 1 Power connector Connect the power cable. 2 HDMI connector Connect your computer with HDMI cable (sold separately). 3 Stand lock feature To lock the stand to the monitor using a M3 x 6 mm screw (screw not included). 4 DP connector (in) Connect your computer with DisplayPort cable. 5 DP connector (out) DP output for MST (multi-stream transport) capable monitor. DP 1.1 monitor can only be connected as the last monitor in the MST chain.
Monitor Specifications Model P2219HC P2419HC Screen type Active matrix - TFT LCD Panel Type In-Plane Switching Technology Aspect ratio 16:9 Viewable image dimensions Diagonal 546.10 mm (21.5 inches) 604.52 mm (23.8 inches) Active Area Horizontal 476.06 mm (18.74 inches) 527.04 mm (20.75 inches) Vertical 267.79 mm (10.54 inches) 296.46 mm (11.67 inches) Area 127484.10 mm² (197.60 inches²) 156246.27 mm² (242.18 inches²) Pixel pitch 0.248 mm x 0.248 mm 0.275 mm x 0.
Adjustability Height adjustable stand Tilt Swivel Pivot 130 mm -5° to 21° -45° to 45° -90° to 90° Dell Display Manager (DDM) Compatibility Easy Arrange and other key features Security Security lock slot (cable lock sold separately) Model P2719HC Screen type Active matrix - TFT LCD Panel Type In-Plane Switching Technology Aspect ratio 16:9 Viewable image dimensions Diagonal 686 mm (27 inches) Active Area Horizontal 597.88 mm (23.54 inches) Vertical 336.31 mm (13.24 inches) Area 201073.
Connectivity • 1 HDMI port • 1 DP(in) port • 1 DP(out) port • 1 USB Type-C port • 2 USB 2.0 downstream ports (rear) • 2 USB 3.0 downstream ports (side) Border width (edge of monitor to active area) 6.0 mm (Top/Left/Right) 20.
Preset Display Modes Display Mode Vertical Frequency (Hz) 60.0 Pixel Clock (MHz) VESA, 640 x 480 Horizontal Frequency (kHz) 31.5 25.2 Sync Polarity (Horizontal/ Vertical) -/- VESA, 640 x 480 37.5 75.0 31.5 -/- IBM, 720 x 400 31.5 70.0 28.3 -/+ VESA, 800 x 600 37.9 60.0 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 1024 64.0 60.0 108.
Model Video input signals AC Input voltage/ frequency/current Inrush current Power Consumption P2419HC 0.2 W (Off Mode)1 0.2 W (Standby Mode)1 14.2 W (On Mode)1 119 W (Max)2 13.9 W (Pon)3 45.3 kWh (TEC)3 P2719HC • HDMI 1.4, 600 mV for each differential line, 100 ohm input impedance per differential pair • DisplayPort 1.
Physical Characteristics Model Signal cable type P2219HC P2419HC • Digital: DisplayPort, 20 pins • Digital: HDMI, 19 pins • Digital: USB Type-C, 24 pins Dimensions (with stand) Height (extended) 472.04 mm (18.58 inches) 486.11 mm (19.14 inches) Height (compressed) 353.42 mm (13.91 inches) 356.11 mm (14.02 inches) Width 487.3 mm (19.19 inches) 537.8 mm (21.17 inches) Depth 166.0 mm (6.54 inches) 166.0 mm (6.54 inches) Height 293.4 mm (11.55 inches) 322.15 mm (12.68 inches) Width 487.
Height (compressed) 394.3 mm (15.52 inches) Width 609.9 mm (24.01 inches) Depth 185.0 mm (7.28 inches) Dimensions (without stand) Height 363.0 mm (14.29 inches) Width 609.9 mm (24.01 inches) Depth 42.8 mm (1.69 inches) Stand dimensions Height (extended) 418.4 mm (16.47 inches) Height (compressed) 371.0 mm (14.61 inches) Width 245.0 mm (9.65 inches) Depth 185.0 mm (7.28 inches) Base 245.0 mm x 185.0 mm (9.65 inches x 7.28 inches) Weight Weight with packaging 9.36 kg (20.
Environmental Characteristics Model Temperature Operating Non-operating Humidity Operating Non-operating Altitude Operating Non-operating Thermal dissipation Model Temperature Operating Non-operating Humidity Operating Non-operating Altitude Operating Non-operating Thermal dissipation 18 | About Your Monitor P2219HC P2419HC 0°C to 40°C (32°F to 104°F) • Storage: -20 °C to 60 °C (-4 °F to 140 °F) • Shipping: -20 °C to 60 °C (-4 °F to 140 °F) 20% to 80% (non-condensing) • Storage: 10% to 90% (non-co
Compliant standards ENERGY STAR Certified Monitor yes (P2419HC/P2719HC only) EPEAT EPEAT registered where applicable. EPEAT registration varies by country. See www.epeat.net for registration status by country.
16 DDC DATA (SDA) 17 DDC/CEC Ground 18 +5 V POWER 19 HOT PLUG DETECT DP connector (in) Pin number 20-pin side of the connected signal cable 1 ML3 (n) 2 GND 3 ML3 (p) 4 ML2 (n) 5 GND 6 ML2 (p) 7 ML1 (n) 8 GND 9 ML1 (p) 10 ML0 (n) 11 GND 12 ML0 (p) 13 GND 14 GND 15 AUX (p) 16 GND 17 AUX (n) 20 | About Your Monitor
18 Hot Plug Detect 19 Re-PWR 20 +3.
20 DP_PWR USB Type-C connector Pin Signal Pin Signal A1 GND B12 GND A2 SSTXp1 B11 SSRXp1 A3 SSTXn1 B10 SSRXn1 A4 VBUS B9 VBUS A5 CC1 B8 SBU2 A6 Dp1 B7 Dn1 A7 Dn1 B6 Dp1 A8 SBU1 B5 CC2 A9 VBUS B4 VBUS A10 SSRXn2 B3 SSTXn2 A11 SSRXp2 B2 SSTXp2 A12 GND B1 GND 22 | About Your Monitor
Universal Serial Bus (USB) This section gives you information about the USB ports that are available on the monitor. Your computer has the following USB ports: • 2 downstream - left side USB 3.0 • 2 downstream - bottom side USB 2.0 NOTE: The monitor’s USB ports work only when the monitor is on or in standby mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds to resume normal functionality. NOTE: This monitor is Super-Speed USB 3.0 and High-Speed USB 2.
USB 2.0 port USB 3.
Plug-and-Play You can install the monitor in any Plug-and-Play-compatible system. The monitor automatically provides the computer system with its extended display identification data (EDID) using display data channel (DDC) protocols so the computer can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor.
Setting Up the Monitor Attaching the stand NOTE: The stand is not installed at the factory when shipped. NOTE: The following instructions are applicable only for attaching the stand that was shipped with your monitor. If you are attaching a stand that you purchased from any other source, follow the set up instructions that were included with the stand. To attach the monitor stand: 1 Follow the instructions on the flaps of the carton to remove the stand from the top cushion that secures it.
6 Attach the stand assembly to the monitor. a.Fit the two tabs on the upper part of the stand to the groove on the back of the monitor. b.Press the stand down till it snaps into place. 7 Place the monitor upright. NOTE: Lift the monitor carefully to prevent it from slipping or falling. Using the Tilt, Swivel, and Vertical Extension NOTE: This is applicable for a monitor with a stand. If you purchased any other stand, refer to the respective stand setup guide for set up instructions.
Vertical Extension NOTE: The stand extends vertically up to 130 mm. The figure below illustrates how to extend the stand vertically. Rotating the Monitor Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully tilted (Tilt) up to avoid hitting the bottom edge of the monitor. NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor.
Adjusting the Rotation Display Settings of Your System After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your System. NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating the ’contents’ on your display. To adjust the Rotation Display Settings: 1 Right-click on the desktop and click Properties.
Connecting the DisplayPort cable Connecting the monitor for DP Multi-Stream Transport (MST) function (optional) NOTE: Supports the DP MST feature. To make use of this feature, your PC Graphics Card must be certified to DP1.2 with MST option. NOTE: Remove the rubber plug when using the DP out connector. NOTE: When DP in and DP out is connected to a PC and second monitor respectively for the first time, MST will be automatically enabled.
NOTE: 1 USB Type-C Alternate mode with DP 1.2, DP 1.1 is not supported. 2 Supports USB PD (Power Delivery) profiles up to 65W(20V/3.25A). 3 If your computer requires >65W(20V/3.25A) to operate and the battery is drained, it may not power up or charge with P2219HC/P2419HC/P2719HC USB Type-C PD. Organizing Your Cables After attaching all necessary cables to your monitor and computer, (see Connecting Your Monitor for cable attachment) organize all cables as shown above.
Removing the Monitor Stand CAUTION: To prevent scratches on the LCD screen while removing the stand, make sure that the monitor is placed on a soft, clean surface. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up. To remove the stand: 1 Place the monitor on a soft cloth or cushion. 2 Press and hold the stand-release button. 3 Lift the stand up and away from the monitor.
Wall Mounting (Optional) NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-mounting kit. Refer to the instructions that come with the VESA-compatible wall mounting kit. 1 Place the monitor on a soft cloth or cushion on a stable, flat table. 2 Remove the stand. 3 Use a Phillips crosshead screwdriver to remove the four screws securing the plastic cover. 4 Attach the mounting bracket from the wall mounting kit to the monitor.
Operating the Monitor Turning on the Monitor Press the button to turn on the monitor. Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.
The following table describes the front panel buttons: Front‑Panel Button Description 1 Use this button to choose from a list of preset color modes. Shortcut key: Preset Modes 2 Use this button to directly access the “Brightness/ Contrast” bar. Shortcut key: Brightness/Contrast 3 Use this menu button to launch the on-screen display (OSD) and select the OSD menu. See Accessing the Menu System. Menu 4 Use this button to go back to the main menu or exit the OSD main menu.
Front‑Panel Button Use the buttons on the front of the monitor to adjust the image settings. Front Panel Button Description 1 Use the Up (increase) and Down (decrease) keys to adjust items in the OSD menu. Up Down 2 Use the OK button to confirm your selection. OK 3 Use the Back button to go back to the previous menu.
Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: Any changes you make using the OSD menu are automatically saved if you move to another OSD menu, exit the OSD menu, or wait for the OSD menu to disappear. 1 Press the button to launch the OSD menu and display the main menu. Dell 2X Monitor Brightness/Contrast Input Source 75% Color Display Menu 75% Personalize Others 2 Press the and buttons to move between options.
Icon Menu and Submenus Description Brightness/ Contrast Use this menu to activate Brightness/Contrast adjustment. Dell 2X Monitor Brightness/Contrast Input Source 75% Color Display Menu 75% Personalize Others Brightness Brightness adjusts the luminance of the backlight (minimum 0; maximum 100). Press the Contrast button to increase brightness. Press the button to decrease brightness. NOTE: Manual adjustment of Brightness is disabled when Dynamic Contrast is switched on.
Icon Menu and Submenus Description Input Source Use the Input Source menu to select between different video inputs that are connected to your monitor. Dell 2X Monitor Brightness/Contrast USB Type-C Input Source DP Color HDMI Display Auto select On Menu Auto select for USB-C Prompt for Multiple Inputs Personalize Reset Input Source Others USB Type-C Select the USB Type-C input when you are using the USB Type-C connector. Use DP to select the USB Type-C input source.
Icon Menu and Submenus Description Color Use the Color menu to adjust the color setting mode.
Icon Menu and Submenus Description Preset Modes When you select Preset Modes, you can choose Standard, ComfortView, Movie, Game, Warm, Cool or Custom Color from the list. Dell 2X Monitor Brightness/Contrast Preset Modes Standard Input Source Input Color Format ComfortView Color Reset Color Movie Display Game Menu Warm Personalize Cool Others Custom Color • Standard: Default color settings. This is the default preset mode.
Icon Menu and Submenus Input Color Format Description Allows you to set the video input mode to: • RGB: Select this option if your monitor is connected to a computer (or DVD player) using the HDMI cable. • YPbPr: Select this option if your DVD player supports only YPbPr output. Dell 2X Monitor Brightness/Contrast Preset Modes Input Source Input Color Format RGB Color Reset Color YPbPr Display Menu Personalize Others Hue Use or to adjust the hue from 0 to 100.
Icon Menu and Submenus Description Display Use the Display menu to adjust image. Dell 2X Monitor Brightness/Contrast Aspect Ratio Wide 16:9 Input Source Sharpness 50 Color Dynamic Contrast Display Response Time Normal Menu MST Off Personalize Reset Display Others Aspect Ratio Sharpness Adjust the image ratio to Wide 16:9, 4:3 or 5:4. Makes the image look sharper or softer. Use or to adjust the sharpness from ‘0’ to ‘100’.
Icon Menu and Submenus Description Menu Select this option to adjust the settings of the OSD, such as the languages of the OSD, the amount of time the menu remains on screen, and so on. Dell 2X Monitor Brightness/Contrast Language Input Source Rotation English Color Transparency 20 Display Timer 20 s Menu Reset Menu Personalize Others Language Rotation Set the OSD display to one of eight languages.
Icon Menu and Submenus Description Personalize Dell 2X Monitor Brightness/Contrast Shortcut Key 1 Preset Modes Input Source Shortcut Key 2 Brightness/Contrast Color Power Button LED On in On Mode Display USB Off in Standby Mode Menu Reset Personalization Personalize Others Shortcut key 1 Shortcut key 2 Power Button LED USB-A Charging USB-C Charging Reset Personalization Select from Preset Modes, Brightness/Contrast, Input Source, Aspect Ratio, Rotation set as shortcut key 1.
Icon Menu and Submenus Description Other P2219HC Dell 2X Monitor Brightness/Contrast Display Info Input Source DDC/CI On Color LCD Conditioning Off Display Firmware M2T209 Menu Service Tag BQWZVC2 Personalize Reset Others Others Factory Reset P2419HC/P2719HC Dell 2X Monitor Display info 46 | Brightness/Contrast Display Info Input Source DDC/CI On Color LCD Conditioning Off Display Firmware M2T209 Menu Service Tag BQWZVC2 Personalize Reset Others Others Factory
Icon Menu and Submenus DDC/CI Description DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor settings using software on your computer. Select Off to turn off this feature. Enable this feature for best user experience and optimum performance of your monitor.
Icon Menu and Submenus Description Firmware Service Tag Firmware version. Displays the Service Tag. The Service Tag is a unique alphanumeric identifier that allows Dell to identify the product specifications and access warranty information. NOTE: The Service Tag is also printed on a label located at the back of the cover. Reset Others Restores other settings, such as DDC/CI, to factory defaults. Factory P2219HC Reset Restores all OSD settings to the factory defaults.
OSD Warning Messages When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), manual brightness adjustment is disabled. Dell 2X Monitor To allow manual adjustment of brightness, the Dynamic Contrast will be switched off. Do you want to continue? Yes No P2X19HC When the monitor does not support a particular resolution mode, you can see the following message: Dell 2X Monitor The current input timing is not supported by the monitor display.
When the monitor enters the Standby mode, the following message will appear: Dell 2X Monitor Going into Standby mode… P2X19HC Activate the computer and wake up the monitor to gain access to the OSD.
If either HDMI, DP, USB Type-C input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears. Dell 2X Monitor No HDMI Cable The display will go into Standby Mode in 4 minutes. www.dell.com/P2X19HC P2X19HC or Dell 2X Monitor No DP Cable The display will go into Standby Mode in 4 minutes. www.dell.com/P2X19HC P2X19HC or Dell 2X Monitor No USB Type-C Cable The display will go into Standby Mode in 4 minutes. www.dell.
Dell 2X Monitor Switch to USB-C Video Input: Yes No P2X19HC When you select OSD items of Factory Reset in Other feature, the following message will appear: Dell 2X Monitor Are you sure you want to reset to default settings? Yes No P2X19HC When you select ‘Yes‘ to reset to default settings, the following message will appear: P2219HC Dell 22 Monitor Easy Initial Setup: Select ‘Yes’ to enable the following function(s): • Always on USB -C Charging Yes No When ‘Yes’ is select, power consumption may i
P2419HC/P2719HC Dell 2X Monitor Easy Initial Setup: Select ‘Yes’ to enable the following function(s): • Always on USB -C Charging Yes No When ‘Yes’ is select, power consumption may increase. When ‘No’ is selected, it will comply with ENERGY STAR requirements. Individual settings can be changed in the Menu. P2X19HC See Troubleshooting for more information.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1 Turn off both your computer and the monitor. 2 Unplug the video cable from the back of the computer.
or Dell 2X Monitor No USB Type-C Cable The display will go into Standby Mode in 4 minutes. www.dell.com/P2X19HC P2X19HC 4 This box also appears during normal system operation if the video cable becomes disconnected or damaged. 5 Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.
Built-in Diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. To run the built-in diagnostics: 1 Make sure that the screen is clean (no dust particles on the surface of the screen).
Always On USB Type-C Charging You can charge your notebook or mobile devices through the USB Type-C cable even when the monitor is powered off. This option, called ‘USB-C Charging‘ is located in the Personalize section of the OSD. This feature is only available in the following monitor firmware revisions: • P2219HC: M2B106 or later • P2419HC: M3B106 or later • P2719HC: M2T106 or later You may verify your monitor’s firmware revision from Firmware.
4 Check current firmware revision: click Update to update the firmware. 5 Wait for the firmware to be updated. 6 Click Close once the firmware is updated.
Common Problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common What You Symptoms Experience No Video/Power No picture LED off No Video/Power No picture or no LED on brightness Missing Pixels LCD screen has spots Stuck-on Pixels LCD screen has bright spots Brightness Problems Safety Related Issues Intermittent Problems Picture too dim or too bright Visible signs of smoke or sparks Monitor malfunctions on & off Poss
Common Symptoms What You Experience Missing Color Picture missing color Wrong Color Image retention from a static image left on the monitor for a long period of time 60 | Possible Solutions • Perform monitor self-test. • Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. • Check for bent or broken pins in the video cable connector.
Product Specific Problems Specific Symptoms Screen image is too small What You Experience Image is centered on screen, but does not fill entire viewing area Cannot adjust OSD does not the monitor with appear on the the buttons on screen the front panel No Input Signal when user controls are pressed The picture does not fill the entire screen No image when using USB TypeC connection to PC or Notebook.
Universal Serial Bus (USB) Specific Problems Specific Symptoms USB interface is not working What You Experience USB peripherals are not working Possible Solutions • Check that your monitor is turned ON. • Reconnect the upstream cable to your computer. • Reconnect the USB peripherals (downstream connector). • Switch off and then turn on the monitor again. • Reboot the computer.
Appendix Safety Instructions For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces. WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Safety, Environmental, and Regulatory Information (SERI). FCC Notices (U.S.
P2719HC : https://eprel.ec.europa.eu/qr/344719 Setting Up Your Monitor Setting Display Resolution to 1920 x 1080 For best performance, set the display resolution to 1920 x 1080 pixels by performing the following steps: In Windows Vista, Windows 7, Windows 8 or Windows 8.1: 1 For Windows 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2 Right-click on the desktop and click Screen Resolution. 3 Click the Dropdown list of the Screen Resolution and select 1920 x 1080. 4 Click OK.
Non-Dell computer In Windows Vista, Windows 7, Windows 8 or Windows 8.1: 1 For Windows 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2 Right-click on the desktop and click Personalization. 3 Click Change Display Settings. 4 Click Advanced Settings. 5 Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, AMD, Intel etc.). 6 Refer to the graphic card provider website for updated driver (for example, http://www.AMD.
Maintenance Guidelines Cleaning Your Monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. CAUTION: Read and follow the Safety Instructions before cleaning the monitor. For best practices, follow these instructions in the list below while unpacking, cleaning, or handling your monitor: • To clean your anti-static screen, lightly dampen a soft, clean cloth with water.
