Read me

DELL(TM) OPENMANAGE(TM) SERVER ADMINISTRATOR STORAGE MANAGEMENT
Version 3.5
Release Notes
*****************************************************************************
***
This is the readme file for Dell OpenManage Server
Administrator Storage Management version 3.5.
For additional information, see the Server Administrator readme file
and the "Dell OpenManage Server Administrator User's Guide."
Note: The Storage Management service is installed using the
Server Administrator installation process. See the
installation readme (readme_ins.txt) on the "Dell Systems
Management Tools and Documentation" DVD for the latest
installation information.
Note: Installing the Storage Management service on a system that does
not have a supported controller or that has a controller that
is not attached to storage is not supported.
It is recommended to use Server Administrator Storage Management
3.5 only on controllers that have PERC 7.2 firmware or later.
If you install or run Storage Management using an
unsupported configuration, it can result in unexpected and
undesirable system behavior.
Note: With Dell OpenManage Systems Management software
version 5.0 or later, Array Manager is not an installable option.
If the Array Manager is installed on your system and you
need information on how to migrate from Array Manager to
Storage Management, see the product documentation prior to
Storage Management 2.1 or the Systems Management software
version 5.1.
*****************************************************************************
***
What’s New in this Release
*****************************************************************************
***
This release of Storage Management provides
the following new features:
• The GUI in storage enclosures displays the
Dell System Express Service Code along
with the Dell System Service Tag.
• With Solid State Disks (SSDs), you can configure a CacheCade
for your virtual disks. For more information,
see CacheCade Using Solid State Drives.
• With the latest firmware, SATA drives with capacity of more than 2 TB
are supported. For the minimum required firmware and driver versions,
go to the Dell OpenManage Server Administrator
and click Storage? Storage Controller? Firmware/Driver Version.
• The new Dell PowerEdge RAID Controller (PERC) H200 driver and