Integrated Dell Remote Access Controller 9 Attribute Registry 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: iDRAC Property Database Group and Object Descriptions...........................................59 New features added......................................................................................................................................................... 59 Firmware version 4.30.30.30....................................................................................................................................59 Firmware version 4.22.00.00.............................
BIOS.BiosBootSettings.SetBootOrderFqdd3 (Read or Write)..........................................................................71 BIOS.BiosBootSettings.SetBootOrderFqdd4 (Read or Write)..........................................................................71 BIOS.BiosBootSettings.SetBootOrderFqdd5 (Read or Write)..........................................................................71 BIOS.BiosBootSettings.SetBootOrderFqdd6 (Read or Write).............................................................
BIOS.HttpDev1Settings.HttpDev1Dns2 (Read or Write)................................................................................... 83 BIOS.HttpDev1Settings.HttpDev1DnsDhcpEnDis (Read or Write)................................................................. 83 BIOS.HttpDev1Settings.HttpDev1Gateway (Read or Write)............................................................................ 83 BIOS.HttpDev1Settings.HttpDev1Interface (Read or Write)............................................................
BIOS.HttpDev4Settings.HttpDev4Gateway (Read or Write)...........................................................................94 BIOS.HttpDev4Settings.HttpDev4Interface (Read or Write).......................................................................... 94 BIOS.HttpDev4Settings.HttpDev4Ip (Read or Write)........................................................................................94 BIOS.HttpDev4Settings.HttpDev4Mask (Read or Write)...........................................................
BIOS.IntegratedDevices.IntNic2Port1BootProto (Read or Write)................................................................. 107 BIOS.IntegratedDevices.IntNic2Port2BootProto (Read or Write)................................................................ 107 BIOS.IntegratedDevices.IntNic2Port3BootProto (Read or Write)................................................................ 107 BIOS.IntegratedDevices.IntNic2Port4BootProto (Read or Write)................................................................
BIOS.IscsiDev1Con1Settings.IscsiDev1Con1VlanPriority (Read or Write).................................................... 120 BIOS.IscsiDev1Con2Settings......................................................................................................................................... 121 BIOS.IscsiDev1Con2Settings.IscsiDev1Con2Auth (Read or Write)................................................................ 121 BIOS.IscsiDev1Con2Settings.IscsiDev1Con2ChapName (Read or Write)..........................
BIOS.MemSettings.Capacity08 (Read or Write)............................................................................................... 132 BIOS.MemSettings.Capacity09 (Read or Write)............................................................................................... 132 BIOS.MemSettings.Capacity10 (Read or Write)................................................................................................ 132 BIOS.MemSettings.Capacity11 (Read or Write).......................................
BIOS.MemSettings.DimmInfo05 (Read or Write)..............................................................................................143 BIOS.MemSettings.DimmInfo06 (Read or Write)..............................................................................................143 BIOS.MemSettings.DimmInfo07 (Read or Write).............................................................................................. 144 BIOS.MemSettings.DimmInfo08 (Read or Write).............................................
BIOS.MemSettings.LockState04 (Read or Write)............................................................................................ 155 BIOS.MemSettings.LockState05 (Read or Write)............................................................................................ 155 BIOS.MemSettings.LockState06 (Read or Write)............................................................................................ 156 BIOS.MemSettings.LockState07 (Read or Write).............................................
BIOS.MemSettings.NvdimmFactoryDefault15 (Read or Write)..................................................................... 170 BIOS.MemSettings.NvdimmFactoryDefault16 (Read or Write)...................................................................... 171 BIOS.MemSettings.NvdimmFactoryDefault17 (Read or Write).......................................................................171 BIOS.MemSettings.NvdimmFactoryDefault18 (Read or Write)....................................................................
BIOS.MemSettings.NvdimmSerialNum4 (Read or Write)................................................................................182 BIOS.MemSettings.NvdimmSerialNum5 (Read or Write)................................................................................182 BIOS.MemSettings.NvdimmSerialNum6 (Read or Write)................................................................................183 BIOS.MemSettings.NvdimmSerialNum7 (Read or Write)................................................................
BIOS.MemSettings.PmControllerRevisionID21 (Read or Write).....................................................................194 BIOS.MemSettings.PmControllerRevisionID22 (Read or Write)....................................................................194 BIOS.MemSettings.PmControllerRevisionID23 (Read or Write)....................................................................194 BIOS.MemSettings.PmDimm00InfoRef (Read or Write)............................................................................
BIOS.MemSettings.PmLockState23 (Read or Write)......................................................................................208 BIOS.MemSettings.PmMemoryMode (Read or Write)....................................................................................208 BIOS.MemSettings.PmPersistentPercentage (Read or Write)..................................................................... 209 BIOS.MemSettings.PmRegion00InfoRef (Read or Write)................................................................
BIOS.MemSettings.RedundantMem (Read or Write)...................................................................................... 220 BIOS.MemSettings.RedundantMemCfgValid (Read or Write)....................................................................... 221 BIOS.MemSettings.RedundantMemInUse (Read or Write)............................................................................ 221 BIOS.MemSettings.RemainingRatedWriteEndurance0 (Read or Write)......................................................
BIOS.MemSettings.SanitizeStatus23 (Read or Write).................................................................................... 234 BIOS.MemSettings.SecureErase00 (Read or Write)........................................................................................234 BIOS.MemSettings.SecureErase01 (Read or Write)........................................................................................ 234 BIOS.MemSettings.SecureErase02 (Read or Write)...................................................
BIOS.MemSettings.SnoopMode (Read or Write)............................................................................................. 246 BIOS.MemSettings.SocketID0 (Read or Write)................................................................................................ 246 BIOS.MemSettings.SocketID1 (Read or Write)................................................................................................. 246 BIOS.MemSettings.SocketID2 (Read or Write)...........................................
BIOS.NetworkSettings.................................................................................................................................................. 258 BIOS.NetworkSettings.HttpDev1EnDis (Read or Write)................................................................................. 258 BIOS.NetworkSettings.HttpDev1SettingsRef (Read or Write)..................................................................... 258 BIOS.NetworkSettings.HttpDev2EnDis (Read or Write).........................
BIOS.ProcSettings.L2StreamHwPrefetcher (Read or Write).........................................................................271 BIOS.ProcSettings.LogicalProc (Read or Write)................................................................................................271 BIOS.ProcSettings.MadtCoreEnumeration (Read or Write)........................................................................... 271 BIOS.ProcSettings.NumaDistanceEnum (Read or Write).....................................................
BIOS.ProcSettings.ProcConfigTdp (Read or Write)........................................................................................ 285 BIOS.ProcSettings.ProcCores (Read or Write).................................................................................................286 BIOS.ProcSettings.ProcCoreSpeed (Read or Write)....................................................................................... 286 BIOS.ProcSettings.ProcCoresPerDie (Read or Write)........................................
BIOS.SataSettings.EmbSata (Read or Write)....................................................................................................298 BIOS.SataSettings.EmbSataShadow (Read or Write).....................................................................................298 BIOS.SataSettings.eSataPort1 (Read or Write)................................................................................................ 299 BIOS.SataSettings.eSataPort1Capacity (Read or Write)..................................
BIOS.SataSettings.SataPortL (Read or Write)...................................................................................................312 BIOS.SataSettings.SataPortLCapacity (Read or Write).................................................................................. 312 BIOS.SataSettings.SataPortLDriveType (Read or Write)................................................................................313 BIOS.SataSettings.SataPortLModel (Read or Write)............................................
BIOS.SlotDisablement.Slot10 (Read or Write)................................................................................................... 330 BIOS.SlotDisablement.Slot11 (Read or Write)....................................................................................................330 BIOS.SlotDisablement.Slot12 (Read or Write)................................................................................................... 330 BIOS.SlotDisablement.Slot13 (Read or Write)............................
BIOS.SysSecurity.AcPwrRcvryDelay (Read or Write)..................................................................................... 346 BIOS.SysSecurity.AcPwrRcvryUserDelay (Read or Write).............................................................................347 BIOS.SysSecurity.AesNi (Read or Write)............................................................................................................ 347 BIOS.SysSecurity.AuthorizeDeviceFirmware (Read or Write)..................................
BIOS.UefiBootSettings.UefiBootSeqEnDis6 (Read or Write)........................................................................360 BIOS.UefiBootSettings.UefiBootSeqEnDis7 (Read or Write)........................................................................ 360 BIOS.UefiBootSettings.UefiBootSeqEnDis8 (Read or Write).........................................................................361 BIOS.UefiBootSettings.UefiBootSeqEnDis9 (Read or Write)..............................................................
FC.NVMeTarget.EighthNVMeTgtNSID (Read or Write).................................................................................373 FC.NVMeTarget.FifthNVMeTargetNQN (Read or Write)...............................................................................373 FC.NVMeTarget.FifthNVMeTargetWWNN (Read or Write)..........................................................................373 FC.NVMeTarget.FifthNVMeTargetWWPN (Read or Write).........................................................................
FC.PortConfig.VirtualWWN (Read or Write)..................................................................................................... 384 FC.PortConfig.VirtualWWPN (Read or Write)...................................................................................................384 FC.PortConfig.WWN (Read Only)........................................................................................................................ 384 FC.PortConfig.WWPN (Read Only)......................................
iDRAC.CurrentIPv4.Gateway (Read Only)..........................................................................................................397 iDRAC.CurrentIPv4.Netmask (Read Only)..........................................................................................................397 iDRAC.CurrentIPV6........................................................................................................................................................ 397 iDRAC.CurrentIPv6.Address1 (Read Only)......
iDRAC.CurrentNIC.Speed (Read Only)................................................................................................................409 iDRAC.CurrentNIC.VLanEnable (Read Only)..................................................................................................... 409 iDRAC.CurrentNIC.VLanID (Read Only)...............................................................................................................410 iDRAC.CurrentNIC.VLanPriority (Read Only)..........................
iDRAC.IPBlocking.RangeAddr (Read or Write)...................................................................................................421 iDRAC.IPBlocking.RangeAddr2 (Read or Write)................................................................................................ 421 iDRAC.IPBlocking.RangeAddr3 (Read or Write)................................................................................................ 421 iDRAC.IPBlocking.RangeAddr4 (Read or Write)....................................
iDRAC.IPv4Static.Netmask (Read or Write)...................................................................................................... 432 iDRAC.IPv4Static.Address (Read or Write)........................................................................................................432 iDRAC.IPv4Static.Gateway (Read or Write)...................................................................................................... 433 iDRAC.IPV6............................................................
iDRAC.KMS.RedundantServerAddress7 (Read or Write)............................................................................... 443 iDRAC.KMS.RedundantServerAddress8 (Read or Write)............................................................................... 443 iDRAC.KMS.Timeout (Read or Write)..................................................................................................................444 iDRAC.LDAP.....................................................................................
iDRAC.NIC.VLanEnable (Read or Write).............................................................................................................455 iDRAC.NIC.VLanID (Read or Write)..................................................................................................................... 455 iDRAC.NIC.VLanPort (Read or Write)................................................................................................................. 456 iDRAC.NIC.VLanPriority (Read or Write)...................
iDRAC.Redfish.Enable (Read or Write)............................................................................................................... 466 iDRAC.RedfishEventing................................................................................................................................................. 467 iDRAC.RedfishEventing.DeliveryRetryAttempts (Read or Write)................................................................. 467 iDRAC.RedfishEventing.
iDRAC.SecurityCertificate.CertificateInstance (Read Only).......................................................................... 478 iDRAC.SecurityCertificate.CertificateType (Read Only).................................................................................478 iDRAC.SecurityCertificate.CertValidFrom (Read Only)...................................................................................478 iDRAC.SecurityCertificate.CertValidTo (Read Only)...................................................
iDRAC.ServerBoot.BootOnce (Read or Write)..................................................................................................489 iDRAC.ServerBoot.FirstBootDevice (Read or Write).......................................................................................489 iDRAC.ServiceModule....................................................................................................................................................490 iDRAC.ServiceModule.ChipsetSATASupported (Read or Write)...
iDRAC.SSHCrypto.Ciphers (Read or Write).......................................................................................................500 iDRAC.SSHCrypto.HostKeyAlgorithms (Read or Write)................................................................................. 500 iDRAC.SSHCrypto.KexAlgorithms (Read or Write)...........................................................................................501 iDRAC.SSHCrypto.MACs (Read or Write).......................................................
iDRAC.SysLog.Server2 (Read or Write)............................................................................................................... 511 iDRAC.SysLog.Server3 (Read or Write).............................................................................................................. 512 iDRAC.SysLog.SysLogEnable (Read or Write)................................................................................................... 512 iDRAC.Telemetry.................................................
iDRAC.TelemetryFCSensor.ReportInterval (Read or Write).......................................................................... 522 iDRAC.TelemetryFCSensor.ReportTriggers (Read or Write).........................................................................523 iDRAC.TelemetryFCSensor.RsyslogTarget (Read or Write).......................................................................... 523 iDRAC.TelemetryFPGASensor...........................................................................................
iDRAC.TelemetryPowerMetrics.RsyslogTarget (Read or Write).................................................................. 533 iDRAC.TelemetryPowerStatistics............................................................................................................................... 533 iDRAC.TelemetryPowerStatistics.DevicePollFrequency (Read Only)..........................................................534 iDRAC.TelemetryPowerStatistics.EnableTelemetry (Read or Write)....................................
iDRAC.Telnet.Enable (Read or Write)..................................................................................................................544 iDRAC.Telnet.MaxSessions (Read Only)............................................................................................................. 544 iDRAC.Telnet.Port (Read or Write)...................................................................................................................... 544 iDRAC.Telnet.Timeout (Read or Write).................
iDRAC.vFlashSD.Health (Read Only)................................................................................................................... 556 iDRAC.vFlashSD.Initialized (Read Only)..............................................................................................................556 iDRAC.vFlashSD.Licensed (Read Only)...............................................................................................................556 iDRAC.vFlashSD.Presence (Read or Write)..................
iDRAC.WebServer.TitleBarOption (Read or Write).......................................................................................... 567 iDRAC.WebServer.TitleBarOptionCustom (Read or Write)............................................................................568 iDRAC.WebServer.TLSProtocol (Read or Write)..............................................................................................568 Chapter 5: InfiniBand Attributes..................................................................
InfiniBand.NICConfig.BootStrapType (Read or Write).................................................................................... 579 InfiniBand.NICConfig.LegacyBootProto (Read or Write)............................................................................... 580 InfiniBand.NICConfig.LnkSpeed (Read or Write)..............................................................................................580 InfiniBand.NICConfig.PKey (Read or Write).....................................................
LifecycleController.LCAttributes.AutoUpdate (Read or Write)..................................................................... 591 LifecycleController.LCAttributes.BIOSRTDRequested (Read or Write)..................................................... 592 LifecycleController.LCAttributes.CollectSystemInventoryOnRestart (Read or Write)........................... 592 LifecycleController.LCAttributes.DiscoveryFactoryDefaults (Read Only)..................................................592 LifecycleController.
NIC.ConfigureFormn.NumberVFAdvertised (Read or Write).........................................................................605 NIC.ConfigureFormn.NumberVFSupported (Read Only)................................................................................605 NIC.ConfigureFormn.PCIDeviceID (Read Only)................................................................................................ 605 NIC.ConfigureFormn.PortGuid (Read Only)....................................................................
NIC.DeviceLevelConfig.RDMAApplicationProfile (Read or Write)................................................................ 618 NIC.DeviceLevelConfig.RDMAProtocolSupport (Read Only)......................................................................... 619 NIC.DeviceLevelConfig.RDMASupport (Read Only).........................................................................................619 NIC.DeviceLevelConfig.SRIOVSupport (Read Only)....................................................................
NIC.iSCSIConfig.IscsiSecondaryDeviceParams (Read Only)......................................................................... 630 NIC.iSCSIConfig.IscsiSecondaryDeviceParamsRef (Read Only)...................................................................630 NIC.iSCSIConfig.IscsiSecondTgtParams (Read Only)...................................................................................... 631 NIC.iSCSIConfig.IscsiSecondTgtParamsRef (Read Only)..............................................................
NIC.IscsiSecondaryDeviceParams.UseIndTgtPortal (Read or Write)........................................................... 641 NIC.IscsiSecondTgtParams.......................................................................................................................................... 642 NIC.IscsiSecondTgtParams.ConnectSecondTgt (Read or Write)................................................................ 642 NIC.IscsiSecondTgtParams.SecondTgtBootLun (Read or Write)....................................
NIC.VndrConfigPage.FCoEBootSupport (Read Only)..................................................................................... 654 NIC.VndrConfigPage.FCOECapabilities (Read Only).......................................................................................655 NIC.VndrConfigPage.FCoECapabilitiesRef (Read Only)................................................................................. 655 NIC.VndrConfigPage.FCoEConfigRef (Read Only)..........................................................
NIC.VndrConfigPage.VirtIscsiMacAddr (Read or Write).................................................................................667 NIC.VndrConfigPage.VirtMacAddr (Read or Write).........................................................................................667 NIC.VndrConfigPage.VirtNodeGuid (Read or Write)....................................................................................... 667 NIC.VndrConfigPage.VirtPortGUID (Read or Write)...................................................
Storage.Controller.SupportEnhancedAutoForeignImport (Read Only)....................................................... 679 Storage.Controller.SupportRAID10UnevenSpans (Read Only)......................................................................680 Storage.Controller.T10PICapability (Read Only)............................................................................................... 680 Storage.Enclosure.................................................................................................
System.AcquisitionInfo.CostCenter (Read or Write)....................................................................................... 693 System.AcquisitionInfo.Expensed (Read or Write)...........................................................................................694 System.AcquisitionInfo.InstallDate (Read or Write)......................................................................................... 694 System.AcquisitionInfo.PONumber (Read or Write)......................................
System.LCD.NMIResetOverride (Read or Write)............................................................................................. 705 System.LCD.NumberErrsHidden (Read Only)....................................................................................................705 System.LCD.NumberErrsVisible (Read Only).....................................................................................................705 System.LCD.QualifierTemp (Read or Write)...........................................
System.SC-BMC.PowerMonitoring (Read or Write)........................................................................................ 715 System.ServerInfo........................................................................................................................................................... 716 System.ServerInfo.NodeID (Read Only)...............................................................................................................716 System.ServerInfo.
System.ServiceContract.Vendor (Read or Write)............................................................................................ 726 System.Storage............................................................................................................................................................... 727 System.Storage.AvailableSpareAlertThreshold (Read or Write)................................................................... 727 System.Storage.
System.ThermalSettings.ThermalProfile (Read or Write)...............................................................................738 System.USBFront .......................................................................................................................................................... 739 System.USBFront.Enable (Read or Write)..........................................................................................................739 System.WarrantyInfo..................................
1 iDRAC Property Database Group and Object Descriptions The iDRAC property database contains the configuration information for iDRAC. Associated object is organizing data, and object group is organizing object. The IDs for the groups and objects that the property database supports are listed in this guide. To configure iDRAC, use the group and object IDs. All string values are limited to displayable ASCII characters, except where otherwise noted.
Firmware version 4.22.00.00 Following features were added in this release: ● ● ● ● ● ● Added Added Added Added Added Added support support support support support support for for for for for for iDRAC.Security.MinimumPasswordScore attribute iDRAC.Security.PasswordMinimumLength attribute iDRAC.Security.PasswordRequireNumbers attribute iDRAC.Security.PasswordRequireRegex attribute iDRAC.Security.PasswordRequireSymbols attribute iDRAC.Security.PasswordRequireUpperCase attribute Firmware version 4.20.20.
2 BIOS Attributes This section provides details about the BIOS attribute groups and objects. Topics: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • BIOS.BiosBootSettings BIOS.BootSeqEnDis BIOS.DebugMenuSetting BIOS.EmbServerMgmt BIOS.HttpDev1Settings BIOS.HttpDev2Settings BIOS.HttpDev3Settings BIOS.HttpDev4Settings BIOS.HttpDev1TlsConfig BIOS.HttpDev2TlsConfig BIOS.HttpDev3TlsConfig BIOS.HttpDev4TlsConfig BIOS.IntegratedDevices BIOS.IscsiDev1Con1Settings BIOS.
BIOS.BiosBootSettings.BiosBootSeq (Read or Write) Description This field tells the system where to find the operating system files needed for system startup. This field applies only when Boot Mode is 'BIOS'; it has no effect when Boot Mode is 'UEFI'. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.
BIOS.BiosBootSettings.BootSeqEnDis2 (Read or Write) Description This field enables or disables this boot option in the Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'BIOS'; it has no effect when Boot Mode is 'UEFI'. Legal Values ● true ● false Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.BootSeqEnDis6 (Read or Write) Description This field enables or disables this boot option in the Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'BIOS'; it has no effect when Boot Mode is 'UEFI'.
BIOS.BiosBootSettings.BootSeqEnDis9 (Read or Write) Description This field enables or disables this boot option in the Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'BIOS'; it has no effect when Boot Mode is 'UEFI'. Legal Values ● true ● false Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.BootSeqEnDis13 (Read or Write) Description This field enables or disables this boot option in the Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'BIOS'; it has no effect when Boot Mode is 'UEFI'.
BIOS.BiosBootSettings.BootSeqEnDis16 (Read or Write) Description This field enables or disables this boot option in the Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'BIOS'; it has no effect when Boot Mode is 'UEFI'. Legal Values ● true ● false Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.BootSeqEnDis20 (Read or Write) Description This field enables or disables this boot option in the Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'BIOS'; it has no effect when Boot Mode is 'UEFI'.
● Uefi Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.BootSeqRetry (Read or Write) Description This field enables or disables the Boot Sequence Retry feature or resets the system. If the last attempt to boot has failed, the system immediately performs a cold reset or retries to boot after a 30 second timeout period, depending on if this field is set to Reset or Enabled.
BIOS.BiosBootSettings.HddPlaceholder (Read or Write) Description When set to Enabled, a Generic RAID HDD placeholder will be placed into the UEFI Boot Sequence. The entry will remain present until an operating system or boot file is installed on the RAID disk. This setting is only available in UEFI Boot Mode. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
BIOS.BiosBootSettings.SetBootOrderFqdd2 (Read or Write) Description The SetBootOrderFqdd fields specify a list of Fqdds representing the boot list to be applied on the next boot. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.
BIOS.BiosBootSettings.SetBootOrderFqdd6 (Read or Write) Description The SetBootOrderFqdd fields specify a list of Fqdds representing the boot list to be applied on the next boot. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.
BIOS.BiosBootSettings.SetBootOrderFqdd10 (Read or Write) Description The SetBootOrderFqdd fields specify a list of Fqdds representing the boot list to be applied on the next boot. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.
BIOS.BiosBootSettings.SetBootOrderFqdd14 (Read or Write) Description The SetBootOrderFqdd fields specify a list of Fqdds representing the boot list to be applied on the next boot. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.
BIOS.BiosBootSettings.SetLegacyHddOrderFqdd2 (Read or Write) Description The SetLegacyHddOrderFqdd fields specify a list of Fqdds representing the Legacy HDD list to be applied on the next boot. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.
BIOS.BiosBootSettings.SetLegacyHddOrderFqdd6 (Read or Write) Description The SetLegacyHddOrderFqdd fields specify a list of Fqdds representing the Legacy HDD list to be applied on the next boot. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.
BIOS.BiosBootSettings.SetLegacyHddOrderFqdd10 (Read or Write) Description The SetLegacyHddOrderFqdd fields specify a list of Fqdds representing the Legacy HDD list to be applied on the next boot. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.SetLegacyHddOrderFqdd14 (Read or Write) Description The SetLegacyHddOrderFqdd fields specify a list of Fqdds representing the Legacy HDD list to be applied on the next boot. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.BiosBootSettings.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency This field has no effect when Boot Mode is set to 'BIOS'. BIOS.BiosBootSettings.UefiBootSettingsRef (Read or Write) Description This field controls system boot settings when Boot Mode is set to 'UEFI'. This field has no effect when Boot Mode is set to 'BIOS'.
BIOS.DebugMenuSetting.BiosCpuKnobTuningRef (Read or Write) Description BIOS CPU Knob Tuning Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.DebugMenuSetting.
Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.DebugMenuSetting.PSPConsoleOut (Read or Write) Description This field enables/disables PSP Console Output (serial debug). Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.DebugMenuSetting.
BIOS.EmbServerMgmt.FrontLcd (Read or Write) Description This field allows you to select whether to display the Default (Model name and number) or a user-defined string in the front-panel LCD display. To modify the advanced features of the front-panel LCD, press F2 during boot to enter System Setup and then select iDRAC Settings.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev1Settings.HttpDev1Dns2 (Read or Write) Description Secondary DNS server IP address for this HTTP Device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev1Settings.
BIOS.HttpDev1Settings.HttpDev1Ip (Read or Write) Description IP address for this HTTP Device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev1Settings.HttpDev1Mask (Read or Write) Description Subnet mask for this HTTP Device.
Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev1Settings.HttpDev1Uri (Read or Write) Description Contains the Uniform Resource Identifier (URI) that the BIOS should boot. If this field is blank, the BIOS will attempt to contact the network's DHCP server and ask it for the boot file name.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev2Settings This group contains the attributes that provides details about BIOS.HttpDev2Settings. BIOS.HttpDev2Settings.HttpDev2DhcpEnDis (Read or Write) Description DHCP Enable/Disable for this HTTP Device.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev2Settings.HttpDev2Gateway (Read or Write) Description Gateway for this HTTP Device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev2Settings.
BIOS.HttpDev2Settings.HttpDev2Protocol (Read or Write) Description Determines whether Internet Protocol version 4 (the most common, older version) or Internet Protocol version 6 (the newest version) is used for this device. Legal Values ● IPv4 ● IPv6 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev2Settings.
BIOS.HttpDev2Settings.HttpDev2VlanEnDis (Read or Write) Description Set this field to Enabled if your DNS or HTTP servers reside on a Virtual LAN (VLAN). Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev2Settings.HttpDev2VlanId (Read or Write) Description When VLAN is enabled, identifies which of the 4094 possible VLANs contains the desired DNS or HTTP servers.
Dependency Not applicable BIOS.HttpDev3Settings.HttpDev3Dns1 (Read or Write) Description Primary DNS server IP address for this HTTP Device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev3Settings.HttpDev3Dns2 (Read or Write) Description Secondary DNS server IP address for this HTTP Device.
BIOS.HttpDev3Settings.HttpDev3Interface (Read or Write) Description NIC interface for this HTTP device Legal Values ● *Dynamic* Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev3Settings.HttpDev3Ip (Read or Write) Description IP address for this HTTP Device.
Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev3Settings.HttpDev3TlsConfigRef (Read or Write) Description View and/or modify this device's authetication configuration. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev3Settings.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev3Settings.HttpDev3VlanPriority (Read or Write) Description When VLAN is enabled, identifies which of 8 possible priorities are assigned to the VLAN having the given ID. This value can be from 0 to 7 inclusive. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev4Settings.HttpDev4DnsDhcpEnDis (Read or Write) Description DNS information from DHCP Enable/Disable for this HTTP Device. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev4Settings.
BIOS.HttpDev4Settings.HttpDev4Mask (Read or Write) Description Subnet mask for this HTTP Device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev4Settings.HttpDev4Protocol (Read or Write) Description Determines whether Internet Protocol version 4 (the most common, older version) or Internet Protocol version 6 (the newest version) is used for this device.
BIOS.HttpDev4Settings.HttpDev4Uri (Read or Write) Description Contains the Uniform Resource Identifier (URI) that the BIOS should boot. If this field is blank, the BIOS will attempt to contact the network's DHCP server and ask it for the boot file name. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev4Settings.
BIOS.HttpDev1TlsConfig This group contains the attributes that provides details about BIOS.HttpDev1TlsConfig. BIOS.HttpDev1TlsConfig.HttpDev1TlsConfig (Read or Write) Description This field controls the authentication configuration for this HTTP device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev1TlsConfig.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev3TlsConfig This group contains the attributes that provides details about BIOS.HttpDev3TlsConfig. BIOS.HttpDev3TlsConfig.HttpDev3TlsConfig (Read or Write) Description This field controls the authentication configuration for this HTTP device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Legal Values ● "None", "OneWay" Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices This group contains the attributes that provides details about BIOS.IntegratedDevices. BIOS.IntegratedDevices.CurrentEmbVideoState (Read or Write) Description Read-only. Indicates the current state of the Embedded Video Controller.
● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.EmbNic3Nic4 (Read or Write) Description Enables or disables the OS interface of the embedded NIC3 and NIC4 controller. NOTE: If set to Disabled (OS), the embedded NICs may still be available for shared network access by the embedded management controller.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.EmbNicPort3BootProto (Read or Write) Description This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the Embedded NIC port number. This attribute is for system management software use, and does not appear in System BIOS Setup. This attribute always returns Unknown when read.
Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.GlobalSlotDriverDisable (Read or Write) Description If you set this field to Enabled, the BIOS will not load any legacy option ROMs (when Boot Mode is BIOS) or UEFI drivers (when Boot Mode is UEFI) for any cards in the system slots.
BIOS.IntegratedDevices.IntegratedNetwork2 (Read or Write) Description Enables or disables the second integrated network card (NDC). When set to Disabled, the NDC is not available to the operating system (OS). NOTE: If set to Disabled (OS), the Integrated NICs may still be available for shared network access by iDRAC. Legal Values ● Enabled ● DisabledOs Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Dependency Not applicable BIOS.IntegratedDevices.InternalSdCardPresence (Read or Write) Description Indicate the presence state of the Internal Dual SD module (IDSDM). Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control None SdCard1Only SdCard2Only Both License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.
BIOS.IntegratedDevices.InternalUsb (Read or Write) Description Enables or disables the internal USB port. Legal Values ● On ● Off Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.InternalUsb1 (Read or Write) Description Enables or disables the internal USB port 1.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.IntNic1Port2BootProto (Read or Write) Description This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the Integrated Network Card number and port number. This attribute is for system management software use, and does not appear in System BIOS Setup. This attribute always returns Unknown when read.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.IntNic2Port1BootProto (Read or Write) Description This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the Integrated Network Card number and port number. This attribute is for system management software use, and does not appear in System BIOS Setup. This attribute always returns Unknown when read.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.IntNic2Port4BootProto (Read or Write) Description This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the Integrated Network Card number and port number. This attribute is for system management software use, and does not appear in System BIOS Setup. This attribute always returns Unknown when read.
Dependency Not applicable BIOS.IntegratedDevices.MmioAbove4Gb (Read or Write) Description Enables support for PCIe devices that require large amount of MMIO resources. Enable this option only for 64-bit operating systems. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.
This Attribute allows more granularity in controlling (Enabling/Disabling) NDC. This attribute is only displayed and used when NdcPcieLinkControl internal attribute default value is set to "Individual".This is most likey done in a PM (OEM ID). Legal Values ● Enabled ● DisabledOs Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.
option may cause insufficient resources to be " "available for remaining slots and prevent the system from functioning.n" "n" Only available on R7920. Controlled by DPI feature: FeatureSupport.PcieBusCustomizable Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control PcieBusUniform PcieBusCustomOpt1 PcieBusCustomOpt2 PcieBusCustomOpt3 License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.
BIOS.IntegratedDevices.PciePreferredIoDeviceFun (Read or Write) Description This field sets the PCI function address that preferred IO device resides. Function address ranges from [0x0:0x7]. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.
BIOS.IntegratedDevices.SnoopHldOff (Read or Write) Description Selects the number of cycles PCI I/O can withhold snoop requests, from the CPU, to allow time to complete its own write to LLC. This setting can help improve performance on workloads where throughput and latency are critical.
BIOS.IntegratedDevices.UsbEnableFrontPortsOnly (Read or Write) Description This field enables/disables the front USB ports during the OS runtime when User Accessible USB Ports is set as All Ports Off (Dynamic). Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.
BIOS.IscsiDev1Con1Settings.IscsiDev1Con1Auth (Read or Write) Description Authentication type for this iSCSI connection. Legal Values ● None ● Chap Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con1Settings.IscsiDev1Con1ChapName (Read or Write) Description CHAP name for this iSCSI connection.
BIOS.IscsiDev1Con1Settings.IscsiDev1Con1DhcpEnDis (Read or Write) Description DHCP Enable/Disable for this iSCSI connection. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con1Settings.IscsiDev1Con1Gateway (Read or Write) Description Initiator Gateway for this iSCSI connection.
BIOS.IscsiDev1Con1Settings.IscsiDev1Con1IsId (Read or Write) Description ISID for this iSCSI connection. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con1Settings.IscsiDev1Con1Lun (Read or Write) Description Target LUN for this iSCSI connection.
BIOS.IscsiDev1Con1Settings.IscsiDev1Con1Protocol (Read or Write) Description This field controls the Internet Protocol used for this iSCSI connection. Legal Values ● IPv4 ● IPv6 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con1Settings.IscsiDev1Con1Retry (Read or Write) Description Retry Count for this iSCSI connection.
BIOS.IscsiDev1Con1Settings.IscsiDev1Con1Settings (Read or Write) Description Provides the title of iSCSI Device 1 Connection 2 Settings page Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con1Settings.IscsiDev1Con1TargetIp (Read or Write) Description Target IP Address for this iSCSI connection.
BIOS.IscsiDev1Con1Settings.IscsiDev1Con1Timeout (Read or Write) Description Timeout for this iSCSI connection in milliseconds. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con1Settings.IscsiDev1Con1VlanEnDis (Read or Write) Description VLAN Enable/Disable for this iSCSI connection.
BIOS.IscsiDev1Con2Settings This group contains the attributes that provides details about BIOS.IscsiDev1Con2Settings. BIOS.IscsiDev1Con2Settings.IscsiDev1Con2Auth (Read or Write) Description Authentication type for this iSCSI connection. Legal Values ● None ● Chap Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con2Settings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con2Settings.IscsiDev1Con2DhcpEnDis (Read or Write) Description DHCP Enable/Disable for this iSCSI connection. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con2Settings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con2Settings.IscsiDev1Con2IsId (Read or Write) Description ISID for this iSCSI connection. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con2Settings.IscsiDev1Con2Lun (Read or Write) Description Target Lun for this iSCSI connection.
Dependency Not applicable BIOS.IscsiDev1Con2Settings.IscsiDev1Con2Protocol (Read or Write) Description This field controls the Internet Protocol used for this iSCSI connection. Legal Values ● IPv4 ● IPv6 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con2Settings.IscsiDev1Con2Retry (Read or Write) Description Retry Count for this iSCSI connection.
Dependency Not applicable BIOS.IscsiDev1Con2Settings.IscsiDev1Con2Settings (Read or Write) Description Provides the title of iSCSI Device 1 Connection 2 Settings page Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con2Settings.IscsiDev1Con2TargetIp (Read or Write) Description Target IP Address for this iSCSI connection.
Dependency Not applicable BIOS.IscsiDev1Con2Settings.IscsiDev1Con2Timeout (Read or Write) Description Timeout for this iSCSI connection in milliseconds. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDev1Con2Settings.IscsiDev1Con2VlanEnDis (Read or Write) Description VLAN Enable/Disable for this iSCSI connection.
Dependency Not applicable BIOS.IscsiDevice1Settings This group contains the attributes that provides details about BIOS.IscsiDevice1Settings. BIOS.IscsiDevice1Settings.IscsiDev1Con1EnDis (Read or Write) Description This field controls the configuration for this iSCSI connection. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDevice1Settings.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDevice1Settings.IscsiDev1ConOrder (Read or Write) Description This field controls the order for which the iSCSI connections will be attempted. Legal Values ● Con1Con2 ● Con2Con1 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IscsiDevice1Settings.
BIOS.MemSettings.AddrBasMir (Read or Write) Description If the system is configured for Dell Fault Resilient Mode (FRM), controls the amount of memory for FRM per processor. The FRM memory is located on a single memory riser per processor. Only half of the FRM memory will be visible to the OS. Has a dependency where DIMM population within the system needs to support Mirror mode. Only System R6xx and up support this feature.
BIOS.MemSettings.AppDirectNamespaceCount2 (Read or Write) Description App Direct namespace count Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.Capacity02 (Read or Write) Description The size of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.Capacity03 (Read or Write) Description The size of this NVDIMM.
BIOS.MemSettings.Capacity06 (Read or Write) Description The size of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.Capacity07 (Read or Write) Description The size of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.Capacity11 (Read or Write) Description The size of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.Capacity12 (Read or Write) Description The size of this NVDIMM.
BIOS.MemSettings.Capacity15 (Read or Write) Description The size of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.Capacity16 (Read or Write) Description The size of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.Capacity20 (Read or Write) Description The size of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.Capacity21 (Read or Write) Description The size of this NVDIMM.
BIOS.MemSettings.CECriticalSEL (Read or Write) Description Enables or disables logging of correctable memory threshold error. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Basic Dependency Not applicable BIOS.MemSettings.ClusterOnDie (Read or Write) Description Enables or disables the Cluster on Die feature.
BIOS.MemSettings.CurrentMemOpModeState (Read or Write) Description Read-only. Indicates the current state of the memory operating mode. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DeviceLocator00 (Read or Write) Description The DIMM slot that this NVDIMM is being populated.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DeviceLocator04 (Read or Write) Description The DIMM slot that this NVDIMM is being populated. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DeviceLocator05 (Read or Write) Description The DIMM slot that this NVDIMM is being populated.
BIOS.MemSettings.DeviceLocator08 (Read or Write) Description The DIMM slot that this NVDIMM is being populated. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DeviceLocator09 (Read or Write) Description The DIMM slot that this NVDIMM is being populated.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DeviceLocator13 (Read or Write) Description The DIMM slot that this NVDIMM is being populated. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DeviceLocator14 (Read or Write) Description The DIMM slot that this NVDIMM is being populated.
BIOS.MemSettings.DeviceLocator17 (Read or Write) Description The DIMM slot that this NVDIMM is being populated. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DeviceLocator18 (Read or Write) Description The DIMM slot that this NVDIMM is being populated.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DeviceLocator22 (Read or Write) Description The DIMM slot that this NVDIMM is being populated. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DeviceLocator23 (Read or Write) Description The DIMM slot that this NVDIMM is being populated.
BIOS.MemSettings.DimmInfo02 (Read or Write) Description Description of this DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DimmInfo03 (Read or Write) Description Description of this DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DimmInfo07 (Read or Write) Description Description of this DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.DimmInfo11 (Read or Write) Description Description of this DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DimmInfo12 (Read or Write) Description Description of this DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DimmInfo16 (Read or Write) Description Description of this DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.DimmInfo20 (Read or Write) Description Description of this DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.DimmInfo21 (Read or Write) Description Description of this DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.FirmwareVersion01 (Read or Write) Description The firmware revision of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.FirmwareVersion02 (Read or Write) Description The firmware revision of this NVDIMM.
BIOS.MemSettings.FirmwareVersion05 (Read or Write) Description The firmware revision of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.FirmwareVersion06 (Read or Write) Description The firmware revision of this NVDIMM.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.FirmwareVersion10 (Read or Write) Description The firmware revision of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.FirmwareVersion11 (Read or Write) Description The firmware revision of this NVDIMM.
BIOS.MemSettings.FirmwareVersion14 (Read or Write) Description The firmware revision of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.FirmwareVersion15 (Read or Write) Description The firmware revision of this NVDIMM.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.FirmwareVersion19 (Read or Write) Description The firmware revision of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.FirmwareVersion20 (Read or Write) Description The firmware revision of this NVDIMM.
BIOS.MemSettings.FirmwareVersion23 (Read or Write) Description The firmware revision of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.FRMPercent (Read or Write) Description Select to define the percent of total memory size that must be used by the fault resilient mode, when selected in the Memory Operating mode.
BIOS.MemSettings.LockState00 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown Disabled Unlocked Locked Frozen NotSupported License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.LockState03 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown Disabled Unlocked Locked Frozen NotSupported License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.LockState06 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown Disabled Unlocked Locked Frozen NotSupported License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.LockState09 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown Disabled Unlocked Locked Frozen NotSupported License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.LockState12 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown Disabled Unlocked Locked Frozen NotSupported License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.LockState15 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown Disabled Unlocked Locked Frozen NotSupported License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.LockState18 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown Disabled Unlocked Locked Frozen NotSupported License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.LockState21 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown Disabled Unlocked Locked Frozen NotSupported License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.MemLowPower (Read or Write) Description Enables or disables the low-power mode of memory. When set to Disabled, the memory will run at full speed. When set to Enabled, the memory will run at a reduced speed to conserve power. Default: Disabled Not used on 13G+. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.MemOptimizer (Read or Write) Description When set to Disabled, the two DRAM controllers are combined in 128-bit mode and provide optimized reliability with Advanced ECC Mode. When set to Enabled, the two DRAM controllers operate independently in 64-bit mode and provide optimized performance without Advanced ECC Mode.
● ● ● ● ChannelInterleaving DieInterleaving SocketInterleaving Auto Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.MemSettings (Read or Write) Description This page controls the system memory settings. Not used on 13G+. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.MemThrottlingMode (Read or Write) Description Displays MCDRAM thermal management/throttling modes of processor(s). Legal Values ● Cltt ● Oltt Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Legal Values ● "Disabled", "Enabled" Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NodeInterleave (Read or Write) Description When set to Enabled, memory interleaving is supported if a symmetric memory configuration is installed. When set to Disabled, the system supports Non-Uniform Memory Access (NUMA) (asymmetric) memory configurations.
BIOS.MemSettings.NvdimmFactoryDefault1 (Read or Write) Description Reset an NVDIMM-N to its Factory Default state, and erase the NVDIMM-N data. WARNING: All contents in NVDIMM-N will be lost if changes are saved when exiting BIOS! Legal Values ● NvdimmFactoryDefaultEnable ● NvdimmFactoryDefaultDisable Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Dependency Not applicable BIOS.MemSettings.NvdimmFactoryDefault5 (Read or Write) Description Reset an NVDIMM-N to its Factory Default state, and erase the NVDIMM-N data. WARNING: All contents in NVDIMM-N will be lost if changes are saved when exiting BIOS! Legal Values ● NvdimmFactoryDefaultEnable ● NvdimmFactoryDefaultDisable Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmFactoryDefault9 (Read or Write) Description Reset an NVDIMM-N to its Factory Default state, and erase the NVDIMM-N data.
● NvdimmFactoryDefaultDisable Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmFactoryDefault13 (Read or Write) Description Reset an NVDIMM-N to its Factory Default state, and erase the NVDIMM-N data.
BIOS.MemSettings.NvdimmFactoryDefault16 (Read or Write) Description Reset an NVDIMM-N to its Factory Default state, and erase the NVDIMM-N data. WARNING: All contents in NVDIMM-N will be lost if changes are saved when exiting BIOS! Legal Values ● NvdimmFactoryDefaultEnable ● NvdimmFactoryDefaultDisable Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Dependency Not applicable BIOS.MemSettings.NvdimmFactoryDefault20 (Read or Write) Description Reset an NVDIMM-N to its Factory Default state, and erase the NVDIMM-N data. WARNING: All contents in NVDIMM-N will be lost if changes are saved when exiting BIOS! Legal Values ● NvdimmFactoryDefaultEnable ● NvdimmFactoryDefaultDisable Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmFirmwareVer0 (Read or Write) Description Indicates firmware version used in this NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.NvdimmFirmwareVer4 (Read or Write) Description Indicates firmware version used in this NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmFirmwareVer9 (Read or Write) Description Indicates firmware version used in this NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.NvdimmFreq1 (Read or Write) Description Indicates the clock frequency of NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmFreq6 (Read or Write) Description Indicates the clock frequency of NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.NvdimmFreq10 (Read or Write) Description Indicates the clock frequency of NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.NvdimmLocation1 (Read or Write) Description Indicates the slot location of the NVDIMM. This location is printed right next to each DIMM slot on the main system board. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmLocation3 (Read or Write) Description Indicates the slot location of the NVDIMM.
BIOS.MemSettings.NvdimmLocation6 (Read or Write) Description Indicates the slot location of the NVDIMM. This location is printed right next to each DIMM slot on the main system board. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmLocation7 (Read or Write) Description Indicates the slot location of the NVDIMM.
BIOS.MemSettings.NvdimmLocation10 (Read or Write) Description Indicates the slot location of the NVDIMM. This location is printed right next to each DIMM slot on the main system board. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmLocation11 (Read or Write) Description Indicates the slot location of the NVDIMM.
BIOS.MemSettings.NvdimmSerialNum1 (Read or Write) Description Indicates the NVDIMM serial number Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmSerialNum6 (Read or Write) Description Indicates the NVDIMM serial number Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.NvdimmSerialNum10 (Read or Write) Description Indicates the NVDIMM serial number Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.NvdimmSize3 (Read or Write) Description Indicates the amount of NVDIMM-N in the DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.NvdimmSize7 (Read or Write) Description Indicates the amount of NVDIMM-N in the DIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.OppSrefEn (Read or Write) Description This field enables/disables opportunistic self-refresh feature. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.PersistentMemoryType (Read or Write) Description Select the type of the persistent memory capacity to create. Legal Values ● PmAppDirect ● PmAppDirectNotInterleaved Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.PersistentMemoryType3 (Read or Write) Description Persistent memory type Legal Values ● AppDirect ● AppDirectNotInterleaved Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PersistentMemPassphrase (Read or Write) Description The Persistent Memory Passphrase unlocks secured Persistent Memory DIMMs. All Persistent Memory DIMMs are affected if the passphrase is modified.
BIOS.MemSettings.PmControllerRevisionID02 (Read or Write) Description Indicates the controller revision ID. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmControllerRevisionID03 (Read or Write) Description Indicates the controller revision ID.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmControllerRevisionID07 (Read or Write) Description Indicates the controller revision ID. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmControllerRevisionID08 (Read or Write) Description Indicates the controller revision ID.
BIOS.MemSettings.PmControllerRevisionID11 (Read or Write) Description Indicates the controller revision ID. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmControllerRevisionID12 (Read or Write) Description Indicates the controller revision ID.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmControllerRevisionID16 (Read or Write) Description Indicates the controller revision ID. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmControllerRevisionID17 (Read or Write) Description Indicates the controller revision ID.
BIOS.MemSettings.PmControllerRevisionID20 (Read or Write) Description Indicates the controller revision ID. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmControllerRevisionID21 (Read or Write) Description Indicates the controller revision ID.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmDimm01InfoRef (Read or Write) Description View Intel Persistent Memory details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmDimm02InfoRef (Read or Write) Description View Intel Persistent Memory details.
BIOS.MemSettings.PmDimm05InfoRef (Read or Write) Description View Intel Persistent Memory details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmDimm06InfoRef (Read or Write) Description View Intel Persistent Memory details.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmDimm10InfoRef (Read or Write) Description View Intel Persistent Memory details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmDimm11InfoRef (Read or Write) Description View Intel Persistent Memory details.
BIOS.MemSettings.PmDimm14InfoRef (Read or Write) Description View Intel Persistent Memory details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmDimm15InfoRef (Read or Write) Description View Intel Persistent Memory details.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmDimm19InfoRef (Read or Write) Description View Intel Persistent Memory details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmDimm20InfoRef (Read or Write) Description View Intel Persistent Memory details.
BIOS.MemSettings.PmDimm23InfoRef (Read or Write) Description View Intel Persistent Memory details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmLockState00 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported.
Legal Values ● ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control PmLockStateUnknown PmLockStateDisabled PmLockStateUnlocked PmLockStateLocked PmLockStateFrozen PmLockStateNotSupported PmLockStateExceeded License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmLockState03 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported.
BIOS.MemSettings.PmLockState05 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control PmLockStateUnknown PmLockStateDisabled PmLockStateUnlocked PmLockStateLocked PmLockStateFrozen PmLockStateNotSupported PmLockStateExceeded License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmLockState08 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmLockState11 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported.
● PmLockStateFrozen ● PmLockStateNotSupported ● PmLockStateExceeded Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmLockState14 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported.
Legal Values ● ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control PmLockStateUnknown PmLockStateDisabled PmLockStateUnlocked PmLockStateLocked PmLockStateFrozen PmLockStateNotSupported PmLockStateExceeded License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmLockState17 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported.
BIOS.MemSettings.PmLockState19 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported. Legal Values ● ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control PmLockStateUnknown PmLockStateDisabled PmLockStateUnlocked PmLockStateLocked PmLockStateFrozen PmLockStateNotSupported PmLockStateExceeded License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Dependency Not applicable BIOS.MemSettings.PmLockState22 (Read or Write) Description The security state of this NVDIMM as unknown, disabled, unlocked, locked, frozen, max password, and not supported.
● ● ● ● ● ● ● ● ● ● ● ● ● ● Percent35 Percent40 Percent45 Percent50 Percent55 Percent60 Percent65 Percent70 Percent75 Percent80 Percent85 Percent90 Percent95 PmPercent100 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.PmRegion00InfoRef (Read or Write) Description View region details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmRegion01InfoRef (Read or Write) Description View region details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmRegion05InfoRef (Read or Write) Description View region details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmRegion06InfoRef (Read or Write) Description View region details.
BIOS.MemSettings.PmRegion09InfoRef (Read or Write) Description View region details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmRegion10InfoRef (Read or Write) Description View region details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmRegion14InfoRef (Read or Write) Description View region details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmRegion15InfoRef (Read or Write) Description View region details.
BIOS.MemSettings.PmRegion18InfoRef (Read or Write) Description View region details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmRegion19InfoRef (Read or Write) Description View region details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmRegion23InfoRef (Read or Write) Description View region details. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmSecureEraseAll (Read or Write) Description Secure Erase Intel Persistent Memory.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PmSocket2 (Read or Write) Description NVDIMM pool creation for socket02 IntelPersistMemOperationTarget==Socket Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.Pool02 (Read or Write) Description Indicates pool info for this NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.PoolCapacity1 (Read or Write) Description Pool Capacity Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PoolCapacity2 (Read or Write) Description Pool Capacity Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.PoolID2 (Read or Write) Description Pool ID Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.ProcEmbMemSystemSize (Read or Write) Description Displays flat size of the MCDRAM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Disabled Spare Mirror IntraNodeMirror DimmSpare Dddc License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.RedundantMemCfgValid (Read or Write) Description Indicates whether the Redundant Memory Configuration is valid. Not on 13G+.
BIOS.MemSettings.RemainingRatedWriteEndurance1 (Read or Write) Description Indicates remaining storage lifetime percentage of NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.RemainingRatedWriteEndurance5 (Read or Write) Description Indicates remaining storage lifetime percentage of NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.RemainingRatedWriteEndurance9 (Read or Write) Description Indicates remaining storage lifetime percentage of NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.RemainingRatedWriteEndurance13 (Read or Write) Description Indicates remaining storage lifetime percentage of NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.RemainingRatedWriteEndurance17 (Read or Write) Description Indicates remaining storage lifetime percentage of NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.RemainingRatedWriteEndurance21 (Read or Write) Description Indicates remaining storage lifetime percentage of NVDIMM Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.SanitizeStatus01 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed. Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown NotStarted InProgress Completed License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SanitizeStatus02 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SanitizeStatus05 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed. Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown NotStarted InProgress Completed License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
BIOS.MemSettings.SanitizeStatus08 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed. Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown NotStarted InProgress Completed License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SanitizeStatus09 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SanitizeStatus12 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed. Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown NotStarted InProgress Completed License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
BIOS.MemSettings.SanitizeStatus15 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed. Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown NotStarted InProgress Completed License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SanitizeStatus16 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SanitizeStatus19 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed. Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown NotStarted InProgress Completed License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
BIOS.MemSettings.SanitizeStatus22 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed. Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control Unknown NotStarted InProgress Completed License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SanitizeStatus23 (Read or Write) Description The sanitize status of this NVDIMM as unknown, not started, in progress, and completed.
Dependency Not applicable BIOS.MemSettings.SecureErase02 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SecureErase03 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory.
BIOS.MemSettings.SecureErase06 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SecureErase07 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory.
BIOS.MemSettings.SecureErase10 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SecureErase11 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory.
BIOS.MemSettings.SecureErase14 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SecureErase15 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory.
BIOS.MemSettings.SecureErase18 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SecureErase19 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory.
BIOS.MemSettings.SecureErase22 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SecureErase23 (Read or Write) Description Enable or Disable Secure Erase Persistent Memory.
Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SerialNumber03 (Read or Write) Description The serial number of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.SerialNumber07 (Read or Write) Description The serial number of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SerialNumber08 (Read or Write) Description The serial number of this NVDIMM.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SerialNumber12 (Read or Write) Description The serial number of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SerialNumber13 (Read or Write) Description The serial number of this NVDIMM.
BIOS.MemSettings.SerialNumber16 (Read or Write) Description The serial number of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SerialNumber17 (Read or Write) Description The serial number of this NVDIMM.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SerialNumber21 (Read or Write) Description The serial number of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SerialNumber22 (Read or Write) Description The serial number of this NVDIMM.
BIOS.MemSettings.SnoopMode (Read or Write) Description Allows tuning of memory performances under different memory bandwidths. The optimal Snoop Mode setting is highly dependent on workload type. Early Snoop is best used for latency sensitive workloads. This setting offers the best balance between workload effects. Home Snoop is best used for NUMA workloads that need maximum local and remote memory bandwidth. Cluster on Die is best used for highly NUMA optimized workloads.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SocketID3 (Read or Write) Description Socket ID Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SpeedMHz00 (Read or Write) Description The speed of this NVDIMM.
BIOS.MemSettings.SpeedMHz03 (Read or Write) Description The speed of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SpeedMHz04 (Read or Write) Description The speed of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SpeedMHz08 (Read or Write) Description The speed of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SpeedMHz09 (Read or Write) Description The speed of this NVDIMM.
BIOS.MemSettings.SpeedMHz12 (Read or Write) Description The speed of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SpeedMHz13 (Read or Write) Description The speed of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SpeedMHz17 (Read or Write) Description The speed of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SpeedMHz18 (Read or Write) Description The speed of this NVDIMM.
BIOS.MemSettings.SpeedMHz21 (Read or Write) Description The speed of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SpeedMHz22 (Read or Write) Description The speed of this NVDIMM. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.SysMemType (Read or Write) Description Indicates the type of main memory installed in the system. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.
BIOS.MemSettings.UnconfiguredCapacity (Read or Write) Description Total NVDIMM size that is unconfigured in the system. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MemSettings.VideoMem (Read or Write) Description Indicates the total amount of video memory available to the embedded video controller.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MiscSettings.DellWyseP25BIOSAccess (Read or Write) Description Controls remote user access to BIOS Setup via Dell Wyse P25/P45 Portal. When set to Disabled, pre-OS keyboard and mouse access is prevented, including to Diagnostics and Boot Options. It cannot be set back to Enabled from the P25/P45.
BIOS.MiscSettings.InSystemCharacterization (Read or Write) Description When enabled, In-System Characterization (ISC) executes during POST upon detecting relevant change(s) in system configuration to optimize system power and performance. ISC takes about 20 seconds to execute, and system reset is required for ISC results to be applied. The Enabled - No Reboot option executes ISC and continues without applying ISC results until the next time system reset occurs.
the hardware components of the system that are always powered on when AC is present (even when the system appears to be off) will be reset. Using this feature is much more convenient than having to physically remove and reinsert the AC power cord, which would then trigger the AC Power Recovery feature when the cord was reinserted.
BIOS.MiscSettings.SystemUefiShell (Read or Write) Description This field enables or disables the System UEFI Shell as a UEFI boot option choice. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.NetworkSettings This group contains the attributes that provides details about BIOS.NetworkSettings. BIOS.NetworkSettings.
Dependency Not applicable BIOS.NetworkSettings.HttpDev2SettingsRef (Read or Write) Description View and/or modify this device's boot configuration. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.NetworkSettings.HttpDev3EnDis (Read or Write) Description When this setting is Enabled, the BIOS will create a UEFI boot option for the HTTP device.
BIOS.NetworkSettings.HttpDev4SettingsRef (Read or Write) Description View and/or modify this device's boot configuration. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.NetworkSettings.IscsiDev1EnDis (Read or Write) Description This field controls the configuration for this iSCSI device.
Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.NetworkSettings.PxeDev3EnDis (Read or Write) Description PXE device Enable/Disable. When enabled, a UEFI boot option will be created for the PXE device.
BIOS.NVMeSettings.NvmeSettings (Read or Write) Description NA Legal Values ● NA Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.NVMeSettings.NvmeSettingsRef (Read or Write) Description This field sets the NVMe drive mode. Legal Values ● NA Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
NOTE: On a Dell 13th generation of PowerEdge server, to set the value from OneTimeBootMode to OneTimeUefiBootSeq, you must boot the server in UEFI mode. BIOS.OneTimeBoot.OneTimeBootMode (Read or Write) Description This field enables the boot device list from which a boot device can be selected. After selecting the OneTime Boot Device List, the desired boot device must be selected from the corresponding Sequence Device field. The system will attempt to boot once to the selected device on next startup.
BIOS.OneTimeBoot.OneTimeCustomBootStr (Read or Write) Description This field determines the one-time boot device when the One-Time Boot Device List is set to one of the Custom String options. The system may temporarily switch to the correct boot mode based on the OneTime Boot Device List setting. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.OneTimeBoot.
BIOS.OneTimeBoot.OneTimeUefiBootSeq (Read or Write) Description This field determines the one-time boot device when the One-Time Boot Device List is set to UEFI Boot Sequence Device. If Boot Mode is set to BIOS, the system temporarily switches the Boot Mode to UEFI when attempting a one-time boot to the device. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.OneTimeBoot.
No dependency, however this setting is only valid when the CPU Power Management is set to Maximum Performance.If the CPU Power Management is not set to Maximum Performance, the customer can still change it but it will have no effect.
links. If you do this, you should localize memory and I/O accesses to the nearest NUMA node to minimize the impact to system performance. Only available if 2 or more CPUs are present. On 14G only MaxDataRate, 10GTps, and 9GTps Legal Values ● MaxDataRate ● 10GTps ● 9GTps Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.DcuStreamerPrefetcher (Read or Write) Description Enables or disables Data Cache Unit (DCU) Streamer Prefetcher. This setting can affect performance, depending on the application running on the server. Recommended for High Performance Computing applications. Not on Value systems.
BIOS.ProcSettings.FastGoConfig (Read or Write) Description Selects CR QoS Configuration Profiles Legal Values ● ● ● ● ● ● ● Default Value 6 Write Privilege Server Control 0 1 2 3 4 5 6 License Required iDRAC Express or iDRAC Enterprise Dependency BIOS.ProcSettings.IommuSupport (Read or Write) Description Enable or Disable IOMMU support.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.L1StreamHwPrefetcher (Read or Write) Description When set to Enabled, the processor provides advanced performance tuning by controlling the L1 Stream HW prefetcher setting. Use the recommended setting, and this option will allow for optimizing overall workloads.
BIOS.ProcSettings.L2StreamHwPrefetcher (Read or Write) Description When set to Enabled, the processor provides advanced performance tuning by controlling the hardware prefetcher setting. Use the recommended setting, and this option will allow for optimizing overall workloads. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.
BIOS.ProcSettings.NumaDistanceEnum (Read or Write) Description This field determines how BIOS enumerate NUMA nodes distance in ACPI SLIT tables. When set to physical, NUMA node distance will enumerated by physical architecture. When set to logical, the level of NUMA node distance will simplified by logical distance for better OS capability.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.Proc1ControlledTurbo (Read or Write) Description Helps control the turbo engagement for processor 1. This option is active when System Profile is set to Performance, or when System Profile is set to Custom, CPU Power Management is set to Maximum Performance, and Turbo Boost enabled. A DPAT Pro license is needed to enable this feature.
● ● ● ● ● ● ● ● ● ● ● 8 10 12 14 16 18 20 22 24 26 28 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.Proc1Id (Read or Write) Description Displays the processor's family, model, and stepping values. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.
BIOS.ProcSettings.Proc1MaxMemoryCapacity (Read or Write) Description Displays the maximum amount of system memory supported by this processor. Available only when "max memory capacity" data is provided by the processor. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.Proc1Microcode (Read or Write) Description Indicates the microcode update signature.
BIOS.ProcSettings.Proc2ControlledTurbo (Read or Write) Description Helps control the turbo engagement for processor 2. This option is active when System Profile is set to Performance, or when System Profile is set to Custom, CPU Power Management is set to Maximum Performance, and Turbo Boost enabled. A DPAT Pro license is needed to enable this feature. No dependency, however this setting is only valid when the CPU Power Management is set to Maximum Performance.
● ● ● ● ● ● ● ● ● 12 14 16 18 20 22 24 26 28 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.Proc2Id (Read or Write) Description Displays the processor's family, model, and stepping values. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.
BIOS.ProcSettings.Proc2MaxMemoryCapacity (Read or Write) Description Displays the maximum amount of system memory supported by this processor. Available only when "max memory capacity" data is provided by the processor. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.Proc2Microcode (Read or Write) Description Indicates the microcode update signature.
BIOS.ProcSettings.Proc3ControlledTurbo (Read or Write) Description Helps control the turbo engagement for processor 3. This option is active when System Profile is set to Performance, or when System Profile is set to Custom, CPU Power Management is set to Maximum Performance, and Turbo Boost enabled. A DPAT Pro license is needed to enable this feature. No dependency, however this setting is only valid when the CPU Power Management is set to Maximum Performance.
● ● ● ● ● ● ● ● ● 12 14 16 18 20 22 24 26 28 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.Proc3Id (Read or Write) Description Displays the processor's family, model, and stepping values. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.
BIOS.ProcSettings.Proc3MaxMemoryCapacity (Read or Write) Description Displays the maximum amount of system memory supported by this processor. Available only when "max memory capacity" data is provided by the processor. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.Proc3Microcode (Read or Write) Description Indicates the microcode update signature.
BIOS.ProcSettings.Proc4ControlledTurbo (Read or Write) Description Helps to control the turbo engagement for processor 4. This option is active when System Profile is set to Performance, or when System Profile is set to Custom, CPU Power Management is set to Maximum Performance, and Turbo Boost enabled. A DPAT Pro license is needed to enable this feature. No dependency, however this setting is only valid when the CPU Power Management is set to Maximum Performance.
● ● ● ● ● ● ● ● ● 12 14 16 18 20 22 24 26 28 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.Proc4Id (Read or Write) Description Displays the processor's family, model, and stepping values. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.
BIOS.ProcSettings.Proc4MaxMemoryCapacity (Read or Write) Description Displays the maximum amount of system memory supported by this processor. Available only when "max memory capacity" data is provided by the processor. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.Proc4Microcode (Read or Write) Description Indicates the microcode update signature.
Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.ProcAts (Read or Write) Description Defines the Address Translation Cache (ATC) behavior for devices to cache DMA translations. This field provides an interface to a chipset's Address Translation and Protection Table to translate DMA addresses to host addresses.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.ProcCores (Read or Write) Description Controls the number of cores presented to the Operating System (OS) from each populated processor socket. In general, it is uncommon to artificially reduce the core count for a given system, but under some circumstances, limited performance improvements to Intel Turbo Boost Technology and potentially larger shared caches may benefit some customers.
BIOS.ProcSettings.ProcCoresPerDie (Read or Write) Description Controls the number of enabled cores in the processor. Under certain circumstances, you may see limited performance improvements to Boost Technology and benefit from potentially larger shared caches if you reduce the number of enabled cores. Most computing environments tend to benefit more from larger number of processing cores, so you must carefully weigh the disabling of cores to gain nominal performance enhancements.
BIOS.ProcSettings.PROCESSOR_CCD_CCX (Read or Write) Description Displays the number of cores per CCD. All the cores in the same CCX share L3 cache. Legal Values ● ALL, TWO(1+1) ● FOUR(2+2) ● SIX(3+3) Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.ProcHyperTransport (Read or Write) Description Specifies the supported HyperTransport I/O Link Specification. If the system board and all installed processors support HT 3, this field is settable to HT 3 or HT 1, else this field will become Read-Only and set to HT 1.
Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.ProcVirtualization (Read or Write) Description When set to Enabled, the BIOS will enable processor Virtualization features and provide the virtualization support to the Operating System (OS) through the DMAR table.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.QpiSpeed (Read or Write) Description The Intel QuickPath Interconnect (QPI) Speed option in the Processor section governs the frequency of the QPI links between the populated processors. The user should be aware that standard and basic bin Intel processors of this architecture support slower QPI link speeds than the advanced parts provide.
Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.ProcSettings.UpiPrefetch (Read or Write) Description UPI Prefetch is a mechanism too get the memory read started early on DDR bus, the UPI Rx path will spawn a MemSpecRd to iMC directly.
BIOS.PxeDev1Settings.PxeDev1VlanEnDis (Read or Write) Description VLAN Enable/Disable for this PXE device. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.PxeDev1Settings.PxeDev1VlanId (Read or Write) Description VLAN ID for this PXE device.
BIOS.PxeDev2Settings.PxeDev2Protocol (Read or Write) Description This field controls the PXE protocol used for this PXE device. Legal Values ● IPv4 ● IPv6 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.PxeDev2Settings.PxeDev2VlanEnDis (Read or Write) Description VLAN Enable/Disable for this PXE device.
BIOS.PxeDev3Settings.PxeDev3Interface (Read or Write) Description NIC Interface used for this PXE device. Legal Values ● *Dynamic* Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.PxeDev3Settings.PxeDev3Protocol (Read or Write) Description This field controls the PXE protocol used for this PXE device.
BIOS.PxeDev3Settings.PxeDev3VlanPriority (Read or Write) Description VLAN priority for this PXE device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.PxeDev4Settings This group contains the attributes that provides details about BIOS.PxeDev4Settings. BIOS.PxeDev4Settings.PxeDev4Interface (Read or Write) Description NIC Interface used for this PXE device.
BIOS.PxeDev4Settings.PxeDev4VlanId (Read or Write) Description VLAN ID for this PXE device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.PxeDev4Settings.PxeDev4VlanPriority (Read or Write) Description VLAN priority for this PXE device.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.RedundantOsControl.RedundantOsState (Read or Write) Description When set to Hidden, the device specified by Redundant OS Location will be hidden. It will not be visible in the Operating System or the BIOS boot sequence. Legal Values ● Visible ● Hidden Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
BIOS.SataSettings.eSataPort1 (Read or Write) Description Sets the drive type of the selected device. When the Embedded SATA setting is ATA Mode, set this field to Auto to enable BIOS support for the device. Select Off to turn off BIOS support for the device. When the Embedded SATA setting is AHCI Mode or RAID Mode, BIOS always enables support for the device and this field is read-only.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortA (Read or Write) Description Sets the drive type of the selected device. When the Embedded SATA setting is ATA Mode, set this field to Auto to enable BIOS support for the device. Select Off to turn off BIOS support for the device. When the Embedded SATA setting is AHCI Mode or RAID Mode, BIOS always enables support for the device and this field is read-only.
This attribute is supressed if Sata Mode is RAID or the platform supports less than 1 onboard SATA port. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortB (Read or Write) Description Sets the drive type of the selected device. When the Embedded SATA setting is ATA Mode, set this field to Auto to enable BIOS support for the device.
BIOS.SataSettings.SataPortBModel (Read or Write) Description Indicates the drive model of the selected device. This attribute is supressed if Sata Mode is RAID or the platform supports less than 2 onboard SATA ports. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortC (Read or Write) Description Sets the drive type of the selected device.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortCModel (Read or Write) Description Indicates the drive model of the selected device. This attribute is supressed if Sata Mode is RAID or the platform supports less than 3 onboard SATA ports. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
BIOS.SataSettings.SataPortDDriveType (Read or Write) Description Indicates type of device attached to this SATA port. This attribute is supressed if Sata Mode is RAID or the platform supports less than 4 onboard SATA ports. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortDModel (Read or Write) Description Indicates the drive model of the selected device.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortEDriveType (Read or Write) Description Indicates type of device attached to this SATA port. This attribute is supressed if Sata Mode is RAID or the platform supports less than 5 onboard SATA ports. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
BIOS.SataSettings.SataPortFCapacity (Read or Write) Description Indicates the total capacity of a hard-disk drive. This field is undefined for removable-media devices such as optical drives. This attribute is supressed if Sata Mode is RAID or the platform supports less than 6 onboard SATA ports. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortGCapacity (Read or Write) Description Indicates the total capacity of a hard-disk drive. This field is undefined for removable-media devices such as optical drives. This attribute is supressed if Sata Mode is RAID or the platform supports less than 7 onboard SATA ports.
This attribute is shown if platform supports at least 8 onboard SATA ports. This attribute is grayed out if Sata Mode is NOT ATA. Legal Values ● Off ● Auto Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortHCapacity (Read or Write) Description Indicates the total capacity of a hard-disk drive. This field is undefined for removable-media devices such as optical drives.
BIOS.SataSettings.SataPortI (Read or Write) Description Sets the drive type of the selected device. When the Embedded SATA setting is ATA Mode, set this field to Auto to enable BIOS support for the device. Select Off to turn off BIOS support for the device. When the Embedded SATA setting is AHCI Mode or RAID Mode, BIOS always enables support for the device and this field is read-only. This attribute is shown if platform supports at least 9 onboard SATA ports.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortJ (Read or Write) Description Sets the drive type of the selected device. When the Embedded SATA setting is ATA Mode, set this field to Auto to enable BIOS support for the device. Select Off to turn off BIOS support for the device. When the Embedded SATA setting is AHCI Mode or RAID Mode, BIOS always enables support for the device and this field is read-only.
BIOS.SataSettings.SataPortJModel (Read or Write) Description Indicates the drive model of the selected device. This attribute is supressed if Sata Mode is RAID or the platform supports less than 10 onboard SATA ports. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortK (Read or Write) Description Sets the drive type of the selected device.
Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortKModel (Read or Write) Description Indicates the drive model of the selected device. This attribute is supressed if Sata Mode is RAID or the platform supports less than 7 onboard SATA ports.
BIOS.SataSettings.SataPortLDriveType (Read or Write) Description Indicates type of device attached to this SATA port. This attribute is supressed if Sata Mode is RAID or the platform supports less than 7 onboard SATA ports. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortLModel (Read or Write) Description Indicates the drive model of the selected device.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.SataPortMDriveType (Read or Write) Description Indicates type of device attached to this SATA port. This attribute is supressed if Sata Mode is RAID or the platform supports less than 7 onboard SATA ports. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
BIOS.SataSettings.SataPortNCapacity (Read or Write) Description Indicates the total capacity of a hard-disk drive. This field is undefined for removable-media devices such as optical drives. This attribute is supressed if Sata Mode is RAID or the platform supports less than 7 onboard SATA ports. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SataSettings.
BIOS.SataSettings.SecurityFreezeLock (Read or Write) Description When set to Enabled, the Security Freeze Lock command is sent to the Embedded SATA drives during POST. This option is only applicable to ATA, AHCI mode, and is not applicable to RAID mode. This has the value of Disabled (read-only) if Sata Mode is Raid or Off. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
BIOS.SerialCommSettings.ExtSerialConnector (Read or Write) Description Use this field to associate the External Serial Connector to Serial Device 1, Serial Device 2, or the Remote Access Device. Note: Only Serial Device 2 can be used for Serial Over LAN. Configuring the External Serial Connector to Serial Device 1 allows independent use of Serial Device 1 while Serial Device 2 can be used for Serial Over LAN. Please see the User's Guide for the various operating modes available. Not supported on blades.
Legal Values ● ● ● ● ● ● Default Value Not Applicable Write Privilege Server Control Off OnConRedirAuto OnNoConRedir OnConRedirCom1 OnConRedirCom2 OnConRedir License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SerialCommSettings.SerialCommSettings (Read or Write) Description This field controls the Serial Communication options.
for each slot. This may include bifurcation of the slot for multiple devices. Manual Control allows the user to override bifurcation settings for each slot. CAUTION: Improper configuration of PCIe slots can prevent the system from functioning properly! Legal Values ● PlatformDefault ● AutoDiscovery ● ManualControl Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SlotBifurcation.
● x8x4x4 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SlotBifurcation.Slot3Bif (Read or Write) Description Controls the bifurcation of PCIe cards installed in the specified slot. When set to default, the slot will operate at the default bifurcation for that slot. When set to x4 All Bifurcation, the slot will bifurcate to either two or four x4 links depending on the slot capability.
Dependency Not applicable BIOS.SlotBifurcation.Slot5Bif (Read or Write) Description Controls the bifurcation of PCIe cards installed in the specified slot. When set to default, the slot will operate at the default bifurcation for that slot. When set to x4 All Bifurcation, the slot will bifurcate to either two or four x4 links depending on the slot capability. When set to x8 All Bifurcation the slot will bifurcate to two x8 links. When set to x16 All Bifurcation the slot will bifurcate to x16 links.
BIOS.SlotBifurcation.Slot7Bif (Read or Write) Description Controls the bifurcation of PCIe cards installed in the specified slot. When set to default, the slot will operate at the default bifurcation for that slot. When set to x4 All Bifurcation, the slot will bifurcate to either two or four x4 links depending on the slot capability. When set to x8 All Bifurcation the slot will bifurcate to two x8 links. When set to x16 All Bifurcation the slot will bifurcate to x16 links.
bifurcate to two x8 links. When set to x16 All Bifurcation the slot will bifurcate to x16 links. When set to x4 x4 x8 Bifurcation the slot will bifurcate to two 4 links plus a x8 link When set to x8 x4 x4 Bifurcation the slot will bifurcate x8 link plus two x4 links NOTE: Only bifurcation options that the slot can support will be shown.
● ● ● ● ● ● ● Allx8 Allx4 x4 x16 x8 x4x4x8 x8x4x4 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SlotBifurcation.Slot12Bif (Read or Write) Description Controls the bifurcation of PCIe cards installed in the specified slot. When set to default, the slot will operate at the default bifurcation for that slot.
● x4x4x8 ● x8x4x4 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SlotBifurcation.Slot14Bif (Read or Write) Description Controls the bifurcation of PCIe cards installed in the specified slot. When set to default, the slot will operate at the default bifurcation for that slot. When set to x4 All Bifurcation, the slot will bifurcate to either two or four x4 links depending on the slot capability.
BIOS.SlotDisablement.Slot1 (Read or Write) Description Controls the configuration of PCIe cards installed in the specified slot. Slot disablement must be used only when the installed peripheral card is preventing booting into the operating system or causing delays or lockups in system startup. When set to Disabled, both the Option ROM and UEFI driver are disabled, the card is not enumerated on the PCI bus, and will not be available to the operating system.
result, the system will not boot from the card, and its pre-boot services will not be available. However, the card is available to the operating system. Note: This option is not available if the slot contains a Dell PowerEdge RAID card (PERC). This option is not available if the slot contains the primary video display adapter. Note: Some PCIe device manufacturers implement a master boot driver that can initialize and manage all the similar devices in the system.
Legal Values ● Enabled ● Disabled ● BootDriverDisabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SlotDisablement.Slot6 (Read or Write) Description Controls the configuration of PCIe cards installed in the specified slot. Slot disablement must be used only when the installed peripheral card is preventing booting into the operating system or causing delays or lockups in system startup.
Dependency Not applicable BIOS.SlotDisablement.Slot8 (Read or Write) Description Controls the configuration of PCIe cards installed in the specified slot. Slot disablement must be used only when the installed peripheral card is preventing booting into the operating system or causing delays or lockups in system startup. When set to Disabled, both the Option ROM and UEFI driver are disabled, the card is not enumerated on the PCI bus, and will not be available to the operating system.
Dependency Not applicable BIOS.SlotDisablement.Slot10 (Read or Write) Description Controls the configuration of PCIe cards installed in the specified slot. Slot disablement must be used only when the installed peripheral card is preventing booting into the operating system or causing delays or lockups in system startup. When set to Disabled, both the Option ROM and UEFI driver are disabled, the card is not enumerated on the PCI bus, and will not be available to the operating system.
lockups in system startup. When set to Disabled, both the Option ROM and UEFI driver are disabled, the card is not enumerated on the PCI bus, and will not be available to the operating system. When set to Boot Driver Disabled, the Option ROM and UEFI driver from that slot will not run during POST. As a result,the system will not boot from the card, and its pre-boot services will not be available. However, the card is available to the operating system.
BIOS.SysInformation To view information about system configuration, use the objects in this group. BIOS.SysInformation.AgesaVersion (Read Only) Description Current AMD reference code version string call "Agesa" integrated into the BIOS. Legal Values ● NA Default Value NA Write Privilege None License Required iDRAC Basic Dependency NA BIOS.SysInformation.SysInformation (Read or Write) Description This field displays information which uniquely identifies this system.
BIOS.SysInformation.SystemCpld2Version (Read or Write) Description Indicates the current firmware version of CPLD. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysInformation.SystemCpldVersion (Read or Write) Description Indicates the current firmware version of CPLD.
Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysInformation.SystemServiceTag (Read or Write) Description Indicates the Service Tag of a system, a unique identifier assigned by the Original Equipment Manufacturer (OEM).
BIOS.SysProfileSettings.DlwmForcedWidth (Read or Write) Description Indicates the forced width of the link width between sockets. Legal Values ● x2 ● x8 ● x16 Default Value x8 Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysProfileSettings.DynamicLinkWidthManagement (Read or Write) Description Dynamic link width management (DLWM) reduces the XGMI link width between sockets from x16 to x8 when no traffic is detected on the link.
Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysProfileSettings.DeterminismSlider (Read or Write) Description It controls whether BIOS will enable determinism to control performance. Performance - BIOS will enable 100% deterministic performance control. Power - BIOS will not enable deterministic performance control. Has a dependency on the System Profile.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysProfileSettings.EnergyPerformanceBias (Read or Write) Description The CPU uses the setting to manipulate the internal behavior of the processor and determine whether targeting higher performance or better power savings. Read-only unless System Profile is set to Custom. Has a dependency on the System Profile. Can only be set if the System Profile is set to Custom.
BIOS.SysProfileSettings.MemPatrolScrub (Read or Write) Description Patrol Scrubbing searches the memory for errors and repairs correctable errors to prevent the accumulation of memory errors. When set to Disabled, no patrol scrubbing will occur. When set to Standard Mode, the entire memory array will be scrubbed once in a 24 hour period. When set to Extended Mode, the entire memory array will be scrubbed more frequently to further increase system reliability.
BIOS.SysProfileSettings.MemVolt (Read or Write) Description Sets the DIMM voltage selection. When set to Auto the system will automatically set the system voltage to the optimal setting based upon the DIMM capability and the installed DIMM population. Also enables setting the system DIMM voltage to a higher (1.5V) setting if the DIMMs support multiple voltages and have been Auto set to a lower voltage. Read-only unless System Profile is set to Custom.
BIOS.SysProfileSettings.PowerSaver (Read or Write) Description When set to Enabled, maximizes power savings, at the expense of performance. Read-only unless System Profile is set to Custom. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysProfileSettings.Proc1TurboCoreNum (Read or Write) Description Controls the number of Turbo Boost enabled cores for processor 1.
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 1 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysProfileSettings.Proc3TurboCoreNum (Read or Write) Description Controls the number of Turbo Boost enabled cores for processor 3. By reducing the number of cores enabled with Turbo Boost, the maximum turbo frequency on the cores with Turbo Boost may be higher.
BIOS.SysProfileSettings.Proc4TurboCoreNum (Read or Write) Description Controls the number of Turbo Boost enabled cores for processor 4. By reducing the number of cores enabled with Turbo Boost, the maximum turbo frequency on the cores with Turbo Boost may be higher. Read-only unless System Profile is set to Custom. Has a dependency on the System Profile. Can only be set if the System Profile is set to Custom. Is set to All for all the other System Profiles..
Has a dependency on the System Profile. Can only be set if the System Profile is set to Custom. Is set to Enabled if the System Profile is set to Performance Per Watt (DAPC), Performance Per Watt (OS), Performance Per Watt (HWPM), or Dense. Is set to Disabled if the System Profile is set to Performance. Legal Values ● Disabled ● Enabled ● Autonomous Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.
Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysProfileSettings.SysProfile (Read or Write) Description Allows optimizing the system for a specific profile, which presets multiple sub-options, or customizing the individual sub-options. When set to a mode other than Custom, BIOS will set each option accordingly.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysProfileSettings.UncoreFrequency (Read or Write) Description Selects the Processor Uncore Frequency. Dynamic mode allows processor to optimize power resources across the cores and uncore during runtime. The optimization of the uncore frequency to either save power or optimize performance is influenced by the setting of the Energy Efficiency Policy. Read-only unless System Profile is set to Custom.
Performance Per Watt (HWPM), Performance, or Dense. This feature is available on Broadwell processors only. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity To manage the system security properties of the BIOS, use the objects in this group.
BIOS.SysSecurity.AcPwrRcvryUserDelay (Read or Write) Description Controls the duration for which the power-on process is delayed after the AC power supply is restored. The value is only effective if AC Power Recovery Delay is set to User Defined. The valid range is between 60s and 240s. Not supported on blades. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.
● Locked Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.BootmanagerPassword (Read or Write) Description Bootmanager password option is available only when Setup Password is enabled. If set to Always, setup password must be entered for accessing Boot Manager. If set to Never, setup password need not be entered for accessing Boot Manager, One-shot UEFI Boot Menu.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.IntelTxt (Read or Write) Description Allows enabling or disabling of the Intel Trusted Execution Technology (TXT). To enable Intel TXT, Virtualization Technology must be enabled, TPM Security must be set to On with Pre-boot Measurements, and TPM Status must be Enabled, Activated. When using TPM2, the hash algorithm must be set to SHA256.
Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.PasswordStatus (Read or Write) Description When set to Unlocked the system password can be changed without entering the setup password. This allows an administrator to maintain a setup password to protect against unauthorized BIOS Setup changes, while a user can freely change the system password.
NOTE: This attribute cannot be disabled by using the Local RACADM. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.SecureBootMode (Read or Write) Description This field configures how the BIOS uses the Secure Boot Policy Objects (PK, KEK, db, dbx).
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.SetupPassword (Read or Write) Description The setup password is the password that must be entered to change any BIOS settings. However, the system password can be changed without entering the correct setup password if Password Status is set to Unlocked. The password is read-only if the password jumper (PWRD_EN) is not installed in the system.
Dependency Not applicable BIOS.SysSecurity.SHA256SystemPasswordSalt (Read or Write) Description Salt for hash of the system password. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.SignedFirmwareUpdate (Read or Write) Description When set to Enabled, this option supports the signed BIOS update feature. Warning! Once enabled, this option cannot be disabled.
Dependency Not applicable BIOS.SysSecurity.TcmActivation (Read or Write) Description Indicates the operational state of the Trusted Cryptography Module (TCM). When set to Activate, the TCM will be enabled and activated. When set to Deactivate, the TCM will be disabled and deactivated. When set to No Change, the operational state of the TCM remains unaltered. This field is read-only when TCM Security is set to Off.
hierarchies cannot be used. When set to Clear, the storage and endorsement hierarchies are cleared of any values, and then reset to Enabled. Requires TPM2 hardware to be installed and TPM Security set to On. Legal Values ● Enabled ● Disabled ● Clear Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.
Legal Values ● ● ● ● Default Value Not Applicable Write Privilege Server Control None Activate Deactivate Clear License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.TpmFirmware (Read or Write) Description Indicates the firmware version of the Trusted Platform Module (TPM). Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.
BIOS.SysSecurity.TpmStatus (Read or Write) Description Displays the current status of the Trusted Platform Module (TPM), and is applicable only for TPM 1.2. If the TPM is not present or TPM Security is set to Off, the value is set to Unknown. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.SysSecurity.
BIOS.TpmAdvancedSettings.TpmPpiBypassClear (Read or Write) Description When set to Enabled, allows the Operating System to bypass Physical Presence Interface (PPI) prompts when issuing PPI Advanced Configuration and Power Interface (ACPI) clear operations. Legal Values ● Disabled ● Enabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.TpmAdvancedSettings.
BIOS.UefiBootSettings.UefiBootSeq (Read or Write) Description This field controls the UEFI boot order. The first option in the list will be attempted first, and if unsuccessful, the second option will be attempted and so on. This field applies only when Boot Mode is 'UEFI'; it has no effect when Boot Mode is 'BIOS'. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.UefiBootSettings.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.UefiBootSettings.UefiBootSeqEnDis4 (Read or Write) Description This field enables or disables this boot option in the UEFI Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'UEFI'; it has no effect when Boot Mode is 'BIOS'.
Legal Values ● true ● false Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.UefiBootSettings.UefiBootSeqEnDis8 (Read or Write) Description This field enables or disables this boot option in the UEFI Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'UEFI'; it has no effect when Boot Mode is 'BIOS'.
BIOS.UefiBootSettings.UefiBootSeqEnDis11 (Read or Write) Description This field enables or disables this boot option in the UEFI Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'UEFI'; it has no effect when Boot Mode is 'BIOS'.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.UefiBootSettings.UefiBootSeqEnDis15 (Read or Write) Description This field enables or disables this boot option in the UEFI Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'UEFI'; it has no effect when Boot Mode is 'BIOS'.
BIOS.UefiBootSettings.UefiBootSeqEnDis18 (Read or Write) Description This field enables or disables this boot option in the UEFI Boot Sequence. The system will attempt to launch enabled boot options only; it will not launch disabled boot options. This field applies only when Boot Mode is 'UEFI'; it has no effect when Boot Mode is 'BIOS'.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.UefiBootSettings.UefiPxeIpVersion (Read or Write) Description This field enables you to select IPv4 PXE booting (default) or IPv6 PXE booting when in 'UEFI' Boot Mode. This field is disabled in 'BIOS' Boot Mode. Changing this field will cause the PXE options in the UEFI Boot Sequence to be replaced on the next reboot.
3 FC Attributes This section provides details about the FC attribute groups and objects. Topics: • • • • • • FC.FCDevice FC.FCTarget FC.HBAConfig FC.NVMeTarget FC.PortConfig FC.Top FC.FCDevice The following section provides information about the objects in the FC.FCDevice group. FC.FCDevice.BusDeviceFunction (Read Only) Description Indicates the enumerated PCI Bus, Device, and Function value as a single string.
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.FCDevice.FamilyVersion (Read Only) Description Indicates the firmware’s family version. Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.FCDevice.PCIDeviceID (Read Only) Description Indicates the device ID present in the PCI configuration space.
FC.FCTarget.FirstFCTargetLUN (Read or Write) Description Specifies the LUN (Logical Unit Number) of the first Fibre Channel boot target Legal Values None Default Value None Write Privilege Server Configuration License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.FCTarget.
FC.HBAConfig.FabricLoginRetryCount (Read or Write) Description Specifies the number of times the initiator will attempt to login to devices on the Storage Area Network Legal Values None Default Value 3 Write Privilege Server Configuration License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.HBAConfig.
FC.HBAConfig.HardZone (Read or Write) Description Specifies the state of Fibre Channel hard zoning Legal Values ● Enabled ● Disabled Default Value Disabled Write Privilege Server Configuration License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.HBAConfig.
FC.HBAConfig.PortDownRetryCount (Read or Write) Description Specifies the number of times the Fibre Channel uplink port will try reconnecting to a target port before the port is marked as being down Legal Values None Default Value None Write Privilege Server Configuration License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.HBAConfig.
FC.NVMeTarget.EighthNVMeTargetNQN (Read or Write) Description PCI Device ID as presented by the device in PCI configuration space Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
Default Value Disabled Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.EighthNVMeTgtNSID (Read or Write) Description Specifies the Namespace ID of the eighth NVMe boot target to access. Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
FC.NVMeTarget.FifthNVMeTgtCntlrID (Read or Write) Description Specifies the Controller ID of the fifth NVMe boot target. Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.FirstNVMeTargetWWPN (Read or Write) Description Specifies the World Wide Port Name of the first NVMe boot target Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
FC.NVMeTarget.FourthNVMeTargetNQN (Read or Write) Description Specifies the fourth target's NVMe Qualified Name Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
Default Value Disabled Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.FourthNVMeTgtNSID (Read or Write) Description Specifies the Namespace ID of the fourth NVMe boot target to access. Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
FC.NVMeTarget.SecondNVMeTargetNSID (Read or Write) Description Specifies the Namespace ID of the second NVMe boot target to access Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.SeventhNVMeTargetWWPN (Read or Write) Description Specifies the World Wide Port Name of the seventh NVMe boot target Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
FC.NVMeTarget.SixthNVMeTargetNQN (Read or Write) Description Specifies the sixth target's NVMe Qualified Name Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
Default Value Disabled Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.SixthNVMeTgtNSID (Read or Write) Description Specifies the Namespace ID of the sixth NVMe boot target to access. Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
FC.NVMeTarget.ThirdNVMeTgtCntlrID (Read or Write) Description Specifies the Controller ID of the third NVMe boot target. Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.NVMeTarget.
FC.PortConfig.FCDevice (Read Only) Description View device and firmware version information Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.PortConfig.
Legal Values ● ● ● ● ● ● ● Default Value Auto Write Privilege Server Configuration Auto 1G 2G 4G 8G 16G 32G License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.PortConfig.
FC.PortConfig.WWPN (Read Only) Description Permanent Fibre Channel World Wide Port Name assigned to the port during manufacturing Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Not Applicable FC.Top The following section provides information about the objects in the FC.Top group. FC.Top.
4 iDRAC Attributes This section provides details about the iDRAC attribute groups and objects. Topics: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 386 iDRAC.ActiveDirectory iDRAC.ADGroup iDRAC.ASRConfig iDRAC.Autodiscovery iDRAC.AutoOSLockGroup iDRAC.CurrentIPV4 iDRAC.CurrentIPV6 iDRAC.CurrentNIC iDRAC.DefaultCredentialMitigationConfigGroup iDRAC.DelegatedAuth iDRAC.EmailAlert iDRAC.GroupManager iDRAC.GUISecurityPolicyMessage iDRAC.Info iDRAC.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • iDRAC.SecurityCertificate iDRAC.SEKM iDRAC.SEKMCert iDRAC.Serial iDRAC.SerialCapture iDRAC.SerialRedirection iDRAC.ServerBoot iDRAC.ServiceModule iDRAC.Smartcard iDRAC.SNMP iDRAC.SNMPAlert iDRAC.SNMPTRAPIPv4 iDRAC.SNMPTRAPIPv6 iDRAC.SSH iDRAC.SSHCrypto iDRAC.SupportAssist iDRAC.SwitchConnectionView iDRAC.SysInfo iDRAC.Syslog iDRAC.Telemetry iDRAC.TelemetryAggregationMetrics iDRAC.
iDRAC.ActiveDirectory This group contains the attributes that provides details about ActiveDirectory. iDRAC.ActiveDirectory.AuthTimeout (Read or Write) Description Specifies the number of seconds to wait for Active Directory authentication requests to complete before timing out. Legal Values ● Integral values from 15 to 300 Default Value 120 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.ActiveDirectory.
License Required iDRAC Enterprise Dependancy None iDRAC.ActiveDirectory.DCLookupEnable (Read or Write) Description Configures iDRAC to use pre-configured domain controllers or to use DNS to find the domain controller. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.ActiveDirectory.
iDRAC.ActiveDirectory.Enable (Read or Write) Description Enables or disables Active Directory user authentication on iDRAC Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.ActiveDirectory.GCLookupEnable (Read or Write) Description Determines how the global catalog server is looked up.
iDRAC.ActiveDirectory.GlobalCatalog2 (Read or Write) Description Specifies the Global Catalog server from which you want the iDRAC to obtain user names. Legal Values ● String of up to 254 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.ActiveDirectory.GlobalCatalog3 (Read or Write) Description Specifies the Global Catalog server from which you want the iDRAC to obtain user names.
Legal Values ● Extended Schema-1 ● Standard Schema-2 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.ActiveDirectory.SSOEnable (Read or Write) Description Enables or disables Active Directory single sign-on authentication on iDRAC. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy Cannot be Enabled unless SmartCard Logon Enable is Disabled iDRAC.
iDRAC.ADGroup.Privilege (Read or Write) Description Role-based authority privileges for a Role Group Legal Values ● Integral values from 0 to 511 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.ASRConfig This group contains the attributes that provides details about ASR configuration. iDRAC.ASRConfig.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Autodiscovery.EnableIPChangeAnnounceFrommDNS (Read or Write) Description Enable iDRAC to obtain list of consoles through mDNS Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Autodiscovery.
Default Value 4 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.AutoOSLockGroup This group contains the attributes that provides details about Auto OS lock group. NOTE: TheiDRAC.AutoOSLock command is deprecated and replaced with iDRAC.AutoOSLockGroup command. iDRAC.AutoOSLockGroup.
Dependancy None iDRAC.CurrentIPv4.DNS1 (Read Only) Description IPv4 address for DNS server 1 Legal Values ● String of up to 16 ASCII characters. Default Value 0.0.0.0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv4.DNS2 (Read Only) Description IPv4 address for DNS Server 2 Legal Values ● String of up to 16 ASCII characters. Default Value 0.0.0.0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv4.
iDRAC.CurrentIPv4.Enable (Read Only) Description Enables or Disables the iDRAC IPv4 stack Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv4.Gateway (Read Only) Description The gateway for the iDRAC IPv4 address Legal Values ● String of up to 16 ASCII characters. Default Value 0.0.0.0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv4.
iDRAC.CurrentIPv6.Address2 (Read Only) Description iDRAC IPv6 second address Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.Address3 (Read Only) Description iDRAC IPv6 third address Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.
Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.Address7 (Read Only) Description iDRAC IPv6 seventh address Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.
License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.Address11 (Read Only) Description iDRAC IPv6 eleventh address Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.Address12 (Read Only) Description iDRAC IPv6 twelfth address Legal Values ● String of up to 63 ASCII characters.
iDRAC.CurrentIPv6.Address15 (Read Only) Description iDRAC IPv6 fifteenth address Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.AutoConfig (Read Only) Description Enables or Disables the iDRAC IPv6 auto configuration option Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.
Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.DNSFromDHCP6 (Read Only) Description Specifies if the DNS Server addresses are obtained from DHCP or not Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.IPV6NumOfExtAddress (Read Only) Description Total number of extended IP Legal Values ● Integral values from 0 to 255 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentIPv6.LinkLocalAddress (Read Only) Description iDRAC IPv6 Link Local Address Legal Values ● String of up to 63 ASCII characters.
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● LOM1-2 LOM2-3 LOM3-4 LOM4-5 LOM5-6 LOM6-7 LOM7-8 LOM8-9 LOM9-10 LOM10-11 LOM11-12 LOM12-13 LOM13-14 LOM14-15 LOM15-16 LOM16-17 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.Autoneg (Read Only) Description Enables autonegotiation of physical link speed and duplex Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.
Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.DNSRacName (Read Only) Description The iDRAC name, which is iDRAC-<SVCTAG> by default. The following characters are supported: ● ● ● ● A-Z a-z 0-9 Hyphen (-) Legal Values ● String of up to 63 ASCII characters. Default Value idrac-SVCTAG Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.Failover (Read Only) Description Specifies the NIC Failover LOM Legal Values ● ● ● ● ● ● Default Value 0 Write Privilege Configure iDRAC None-0 LOM1-1 LOM2-2 LOM3-3 LOM4-4 ALL-5 License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.LinkStatus (Read Only) Description iDRAC Link Status.
iDRAC.CurrentNIC.MACAddress2 (Read Only) Description The MAC Address 2 of the iDRAC Legal Values ● String of up to 17 ASCII characters. Default Value 00:00:00:00:00:02 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.MgmtIfaceName (Read Only) Description The name of the Management Network Interface Legal Values ● String of up to 11 ASCII characters.
Legal Values ● ● ● ● ● Default Value 1 Write Privilege Configure iDRAC Dedicated-1 LOM1-2 LOM2-3 LOM3-4 LOM4-5 License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.SharedNICScanTime (Read Only) Description Dedicated to Shared Failover Timeout Legal Values ● Integral values from 5 to 255 Default Value 30 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.
License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.VLanID (Read Only) Description Specifies the VLAN ID for the network VLAN configuration Legal Values ● Integral values from 1 to 4094 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.CurrentNIC.
iDRAC.DefaultCredentialMitigationConfigGroup.DefaultCredential Mitigation (Read or Write) Description Enable Default Credential Mitigation NOTE: Attribute naming might not be same across all interfaces. Use the key string to find and compare correct attribute name in WSMAN SCP. Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure User License Required iDRAC Basic Dependancy None iDRAC.
Write Privilege Configure User License Required iDRAC Express or Enterprise Dependancy None iDRAC.DelegatedAuth.Name (Read or Write) Description Name 'tag' for the delegated authentication, used for configuration. Legal Values ● String of up to 128 ASCII characters Default Value NA Write Privilege Configure User License Required iDRAC Express or Enterprise Dependancy None iDRAC.DelegatedAuth.
License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.EmailAlert.CustomMsg (Read or Write) Description Specifies the custom message that forms the subject of the alert Legal Values ● String of up to 32 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.EmailAlert.
Description GroupUUID is a universally unique identifier that is automatically generated when the iDRAC Group Manager local group is created. This is used to track a group and remains constant for the life of the group. Legal Values ● String of up to 32 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.GroupManager.Status (Read or Write) NOTE: The iDRAC.GroupManager.
iDRAC.Info.Build (Read Only) Description String containing the current product build version Legal Values ● String of up to 16 ASCII characters. Default Value 25 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Info.CPLDVersion (Read Only) Description Specifies the CPLD firmware version of the server. Legal Values ● String of up to 6 ASCII characters. Default Value 0.0.
Legal Values ● String of up to 20 ASCII characters. Default Value 2.0 Write Privilege Server Configuration License Required iDRAC Basic Dependancy None iDRAC.Info.Name (Read Only) Description User assigned name identifying this controller Legal Values ● String of up to 15 ASCII characters. Default Value iDRAC Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Info.
License Required iDRAC Basic Dependancy None iDRAC.Info.ServerGen (Read Only) Description String containing the current server generation Legal Values ● ● ● ● Default Value 4 Write Privilege Configure iDRAC 12G-1 13G-2 14G-3 15G-4 License Required iDRAC Basic Dependancy None iDRAC.Info.
Dependancy None iDRAC.IntegratedDatacenter This group contains the attributes that provides details about Integrated datacenter. iDRAC.IntegratedDatacenter.DiscoveryEnable (Read or Write) Description Enable Autodiscovery Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRac.IOIDOpt This group contains the attributes that provides details about iDRAC IOIDOpt. iDRAC.IOIDOpt.
License Required iDRAC Basic Dependancy None iDRAC.IOIDOpt.StorageTargetPersistencePolicy (Read or Write) Description Storage Target Persistence Policy Legal Values ● ● ● ● ● ● ● ● Default Value 7 Write Privilege Configure iDRAC None-0 WarmReset-1 ColdReset-2 WarmReset, ColdReset-3 ACPowerLoss-4 WarmReset, ACPowerLoss-5 ColdReset, ACPowerLoss-6 WarmReset, ColdReset, ACPowerLoss-7 License Required iDRAC Basic Dependancy None iDRAC.IOIDOpt.
● ● ● ● ACPowerLoss-4 WarmReset, ACPowerLoss-5 ColdReset, ACPowerLoss-6 WarmReset, ColdReset, ACPowerLoss-7 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPBlocking This group contains the attributes that provides details about IP Blocking. iDRAC.IPBlocking.BlockEnable (Read or Write) Description Enables or disables the IPv4 address blocking feature of iDRAC.
iDRAC.IPBlocking.PenaltyTime (Read or Write) Description Defines the time span in seconds that session requests from an IP address with excessive failures are rejected. Legal Values ● Integral values from 2 to 65535 Default Value 60 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.IPBlocking.RangeAddr (Read or Write) Description Specifies the IPv4 address of IPv4 Address Range 1 of the IP blocking feature of iDRAC.
Legal Values ● String of up to 16 ASCII characters. Default Value 192.168.1.1 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.IPBlocking.RangeAddr5 (Read or Write) Description Specifies the IPv4 address of IPv4 Address Range 5 of the IP blocking feature of iDRAC. Legal Values ● String of up to 16 ASCII characters. Default Value 192.168.1.
Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.IPBlocking.RangeEnable4 (Read or Write) Description Enables or disables IPv4 Address Range 4 of the IP blocking feature of iDRAC. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.IPBlocking.
License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.IPBlocking.RangeMask3 (Read or Write) Description Specifies the IPv4 subnet mask of IPv4 Address Range 3 of the IP blocking feature of iDRAC. Legal Values ● String of up to 16 ASCII characters. Default Value 255.255.255.0 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.IPBlocking.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPMILan.CommunityName (Read or Write) Description Specifies the SNMP community name for traps Legal Values ● String of up to 18 ASCII characters. Default Value public Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPMILan.
Dependancy None iDRAC.IPMISerial This group contains the attributes that provides details about iDRAC IPMI Serial. iDRAC.IPMISerial.BaudRate (Read or Write) Description Specifies the baud rate for serial connection over IPMI Legal Values ● ● ● ● Default Value 57600 Write Privilege Configure iDRAC 9600-9600 19200-19200 57600-57600 115200-115200 License Required iDRAC Basic Dependancy None iDRAC.IPMISerial.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPMISerial.EchoControl (Read or Write) Description Enables or Disables echo control on the IPMI serial interface Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPMISerial.
Legal Values ● Enter-1 ● Null-2 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPMISerial.LineEdit (Read or Write) Description Enables or Disables line editing on the IPMI serial interface Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPMISerial.
License Required iDRAC Basic Dependancy None iDRAC.IPMISOL.BaudRate (Read or Write) Description Specifies the Baud rate for serial communication over LAN Legal Values ● ● ● ● Default Value 115200 Write Privilege Configure iDRAC 9600-9600 19200-19200 57600-57600 115200-115200 License Required iDRAC Basic Dependancy None iDRAC.IPMISOL.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPv4 This group contains the attributes that provides details about iDRAC IPv4 settings. iDRAC.IPv4.DHCPEnable (Read or Write) Description Specifies if DHCP is used to assign the iDRAC IPv4 address Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPv4.
Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPv4.Enable (Read or Write) Description Enables or Disables the iDRAC IPv4 stack Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPv4.Netmask (Read or Write) Description The subnet mask used for the iDRAC IPv4 address Legal Values ● String of up to 16 ASCII characters. Default Value 255.255.255.
Legal Values ● String of up to 16 ASCII characters. Default Value 0.0.0.0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPv4Static.DNS2 (Read or Write) Description Statically configurable DNS Server 2 Legal Values ● String of up to 16 ASCII characters. Default Value 0.0.0.0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPv4Static.
License Required iDRAC Basic Dependancy None iDRAC.IPv4Static.Gateway (Read or Write) Description iDRAC static IPv4 gateway (can be configured even when DHCP is enabled) Legal Values ● String of up to 16 ASCII characters. Default Value 192.168.0.1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPV6 This group contains the attributes that provides details about iDRAC IPv6 settings iDRAC.IPv6.
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.IPv6.Address4 (Read Only) Description iDRAC IPv6 fourth address Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.IPv6.Address5 (Read Only) Description iDRAC IPv6 fifth address Legal Values ● String of up to 63 ASCII characters.
iDRAC.IPv6.Address8 (Read Only) Description iDRAC IPv6 eighth address Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.IPv6.Address9 (Read Only) Description iDRAC IPv6 ninth address Legal Values ● String of up to 63 ASCII characters.
Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.IPv6.Address13 (Read Only) Description iDRAC IPv6 thirteenth address Legal Values ● String of up to 63 ASCII characters. Default Value :: Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.IPv6.
● Deprecated-4 ● Invalid-5 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPv6.AutoConfig (Read or Write) Description Enables or Disables the iDRAC IPv6 auto configuration option Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.IPv6.
Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.IPv6.DUID (Read Only) Description DHCP Unique Identifier Legal Values ● String of up to 144 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPv6.
Dependancy None iDRAC.IPv6.PrefixLength (Read or Write) Description Prefix length for the iDRAC IPv6 Address Legal Values ● Integral values from 1 to 128 Default Value 64 Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.IPv6Static This group contains the attributes that provides details about iDRAC IPv6 Static. iDRAC.IPv6Static.
Dependancy None iDRAC.IPv6Static.DNSFromDHCP6 (Read or Write) Description Specifies if the DNS server IPv6 addresses should be assigned from the DHCP server on the network. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.IPv6Static.Gateway (Read or Write) Description iDRAC static IPv6 gateway Legal Values ● String of up to 63 ASCII characters.
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.KMS The objects in this group help to set username and password for the Key Management Server (KMS) connection. NOTE: Run the racadm sekm enable command after changing any iDRAC KMS attributes. This action validates if the changes are valid and iDRAC can communicate with the KMS. iDRAC.KMS.iDRACPassword (Read or Write) Description Specifies the password for the iDRAC account on the Key Management server.
Default Value None Write Privilege Configure iDRAC License Required SEKM and iDRAC Enterprise Dependancy None iDRAC.KMS.RedundantKMIPPortNumber (Read or Write) Description Specifies the KMIP Port Number for the Redundant Server. Legal Values ● Integral values from 0 to 65535 Default Value 5696 Write Privilege Configure iDRAC License Required SEKM and iDRAC Enterprise Dependancy None iDRAC.KMS.
iDRAC.KMS.RedundantServerAddress4 (Read or Write) Description Specifies the FQDN, IPv4 address or IPv6 address of the fourth Redundant Key Management Server. Legal Values ● String of up to 254 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required SEKM and iDRAC Enterprise Dependancy None iDRAC.KMS.RedundantServerAddress5 (Read or Write) Description Specifies the FQDN, IPv4 address or IPv6 address of the fifth Redundant Key Management Server.
Legal Values ● String of up to 254 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required SEKM and iDRAC Enterprise Dependancy None iDRAC.KMS.Timeout (Read or Write) Description Specifies the SSL connection timeout value in seconds. Legal Values ● Integral values from 0 to 300 Default Value 10 Write Privilege Configure iDRAC License Required SEKM and iDRAC Enterprise Dependancy None iDRAC.
Legal Values ● String of up to 254 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.LDAP.CertValidationEnable (Read or Write) Description Controls certificate validation during SSL handshake. Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.LDAP.Enable (Read or Write) Description Turns LDAP service on or off.
Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.LDAP.Port (Read or Write) Description Port of LDAP over SSL. Legal Values ● Integral values from 1 to 65535 Default Value 636 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.LDAP.SearchFilter (Read or Write) Description A valid LDAP search filter to be used if the user attribute cannot uniquely identify the login user within the chosen baseDN.
Dependancy None iDRAC.LDAPRoleGroup This group contains the attributes that provides details about iDRAC LDAP Role Grouping. iDRAC.LDAPRoleGroup.DN (Read or Write) Description This is the Domain Name of the group. Legal Values ● String of up to 1024 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.LDAPRoleGroup.
iDRAC.LocalSecurity.PrebootConfig (Read or Write) Description Enables or disables the ability of the local user to configure iDRAC from the BIOS POST option-ROM. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Lockdown This group contains the attributes that provides details about iDRAC lockdown. iDRAC.Lockdown.
iDRAC.Logging This group contains the attributes that provides details about iDRAC logging. iDRAC.Logging.SELBufferType (Read or Write) Description Configurable attribute to modify the SEL behavior to make it linear instead of default circular. Legal Values ● Circular-0 ● Linear-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Logging.
iDRAC.NIC.AutoConfigIPV6 (Read or Write) Description IPV6 Enable Auto Configuration Legal Values ● Disabled-0 ● Enable Once-1 ● Enable Once After Reset-2 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.NIC.
iDRAC.NIC.DiscoveryLLDP (Read or Write) Description Enables LLDP over active NIC Interface. Legal Values ● ● ● ● Default Value 0 Write Privilege Configure iDRAC Disabled-0 Dedicated-1 SharedLOM-2 Enabled-3 License Required iDRAC Basic Dependancy None iDRAC.NIC.DNSDomainFromDHCP (Read or Write) Description Specifies that the iDRAC DNS Domain Name should be assigned from the network DHCP server.
iDRAC.NIC.DNSRacName (Read or Write) Description The iDRAC name, which is iDRAC- by default. The following characters are supported: ● ● ● ● A-Z a-z 0-9 Hyphen (-) Legal Values ● String of up to 63 ASCII characters. Default Value idrac-SVCTAG Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.NIC.DNSRegister (Read or Write) Description Registers the iDRAC name with the DNS server.
iDRAC.NIC.Enable (Read or Write) Description Enables or Disables the iDRAC network interface controller. Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.NIC.Failover (Read or Write) Description Specifies the NIC Failover LOM. Legal Values ● ● ● ● ● ● Default Value 0 Write Privilege Configure iDRAC None-0 LOM1-1 LOM2-2 LOM3-3 LOM4-4 All-5 License Required iDRAC Basic Dependancy None iDRAC.NIC.
iDRAC.NIC.PowerOnOCPSlot1InS5 (Read or Write) Description Enable Embedded Networking OCP slot 1 power in host off / S5 state for Wake On LAN Legal Values ● Off-0 ● On-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.NIC.SharedNICScanTime (Read or Write) Description Wait time for the iDRAC to switch from shared mode to dedicated mode.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.NIC.SwitchPortConnection (Read Only) Description Specifies the Port ID extracted from LLDP packet. Legal Values ● String of up to 512 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.NIC.
Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.NIC.VLanPort (Read or Write) Description VLAN Port Legal Values ● Both-0 ● Dedicated port only-1 ● LOM ports only-2 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.NIC.VLanPriority (Read or Write) Description Specifies the VLAN priority for the network VLAN configuration NOTE: This object is applicable only to iDRAC on Racks and Towers.
● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.NICStatic.DNSDomainName (Read or Write) Description The DNS Domain Name Legal Values ● String of up to 254 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.NTPConfigGroup This group contains the attributes that provides details about iDRAC NTP Config group. iDRAC.NTPConfigGroup.
Legal Values ● String of up to 255 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.NTPConfigGroup.NTPEnable (Read or Write) Description Enable Network Time Protocol Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.NTPConfigGroup.
iDRAC.OS-BMC.OsIpAddress (Read or Write) Description OS-BMC Passthrough Host IP Address. Enter a valid IPv4 address. Legal Values ● String of up to 16 ASCII characters. Default Value 0.0.0.0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.OS-BMC.
iDRAC.OS-BMC.UsbNicIpv4AddressSupport (Read or Write) Description Specifies whether the USB NIC IP Address can support IPv4 or NOT. Select Enabled to allow IPv4 address. Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.OS-BMC.UsbNicIpV6Address (Read Only) Description USB NIC IPv6 Address Legal Values ● String of up to 63 ASCII characters.
License Required iDRAC Basic Dependancy None iDRAC.Platformcapability This group contains the attributes that provides details about iDRAC Platform capability. iDRAC.PlatformCapability.ASHRAECapable (Read Only) Description Indicates if ASHRAE is supported Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.PlatformCapability.
● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.PlatformCapability.FrontPanelUSBCapable (Read Only) Description Indicates hardware is Front Panel USB capable Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.PlatformCapability.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.PlatformCapability.NicVLANCapable (Read Only) Description Indicates Platform support for VLAN in Dedicated and/or Shared Legal Values ● ● ● ● Default Value 3 Write Privilege Configure iDRAC None-0 Dedicated-1 SharedLOM-2 Both-3 License Required iDRAC Basic Dependancy None iDRAC.PlatformCapability.
iDRAC.PlatformCapability.PowerMonitoringCapable (Read Only) Description Indicates hardware is Power Monitoring capable Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.PlatformCapability.
iDRAC.PlatformCapability.UserPowerCapCapable (Read or Write) Description Indicates User Power cap Capable Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.PlatformCapability.vFlashCapable (Read Only) Description Indicates hardware is vFlash capable Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.
Dependancy None iDRAC.RACADM This group contains the attributes that provides details about iDRAC RACADM. iDRAC.Racadm.Enable (Read or Write) Description Enables or disables the Remote Racadm interface. Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Racadm.MaxSessions (Read Only) Description Specifies the maximum number of active Remote Racadm sessions allowed.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.RedfishEventing This group contains the attributes that provides details about iDRAC Redfish Eventing. iDRAC.RedfishEventing.DeliveryRetryAttempts (Read or Write) Description This is the number of attempts an event posting is retried before the subscription is terminated.
iDRAC.RemoteHosts This group contains the attributes that provides details about iDRAC remote hosts. iDRAC.RemoteHosts.ConnectionEncryption (Read or Write) Description Specifies how encryption on the connection to the SMTP server will be configured. Legal Values ● None-0 ● SSL/TLS-1 ● STARTTLS-2 Default Value 2 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.RemoteHosts.
Dependancy None iDRAC.RemoteHosts.SMTPPassword (Read or Write) Description SMTP Password Legal Values ● String of up to 50 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.RemoteHosts.
iDRAC.RFS This group contains the attributes that provides details about iDRAC RFS NOTE: To perform the complete workflow for RFS and set attributes, refer to remoteimage. iDRAC.RFS.AttachMode (Read or Write) Description RFS Media attach mode Legal Values ● Auto Attach-0 ● Attach-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.RFS.
Write Privilege Server Configuration License Required iDRAC Enterprise Dependancy None iDRAC.RFS.MediaAttachState (Read Only) Description RFS Media attach state Legal Values ● Detached-0 ● Attached-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.RFS.Password (Read or Write) Description Specifies the remote file share password. Legal Values ● String of up to 255 ASCII characters.
Dependancy None iDRAC.RFS.WriteProtected (Read Only) Description RFS Write Protection Legal Values ● Read Only-0 ● Read Write-1 Default Value 0 Write Privilege Server Configuration License Required iDRAC Enterprise Dependancy None iDRAC.SCEP This group contains the attributes that provides details about iDRAC SCEP capability. iDRAC.SCEP.CA-URL (Read or Write) Description Specifies the URL of the Certificate Authority. Legal Values ● String of up to 1024 ASCII characters.
License Required iDRAC Datacenter Dependancy SCEP CA-URL must be configured before SCEP can be enabled. iDRAC.SCEP.EnrollmentStatus (Read Only) Description Provides the enrollment status. Legal Values ● ● ● ● Default Value 0 Write Privilege Configure iDRAC None-0 Enrolling-1 Enrolled-2 Error-3 License Required iDRAC Datacenter Dependancy None iDRAC.SecureDefaultPassword This group contains the attributes that provides details about iDRAC secure default password. iDRAC.SecureDefaultPassword.
Dependancy None iDRAC.Security.CsrCountryCode (Read or Write) Description Specifies the CSR Country Code (CC). Legal Values ● String of up to 2 ASCII characters. Default Value US Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Security.CsrEmailAddr (Read or Write) Description Specifies the CSR email address. Legal Values ● String of up to 254 ASCII characters.
iDRAC.Security.CsrOrganizationName (Read or Write) Description Specifies the CSR Organization Name (O) Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Security.CsrOrganizationUnit (Read or Write) Description Specifies the CSR Organization Unit (OU) Legal Values ● String of up to 64 ASCII characters.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None NOTE: Setting FIPSMode to 0 - Disabled, will not have any effect. NOTE: To disable FIPSmode, reset the iDRAC to factory default setting (racadm racresetcfg).
iDRAC.Security.PasswordRequireRegex (Read or Write) Description Specifies that the password must pass the given regular expression. Legal Values ● String of up to 100 characters Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Security.PasswordRequireSymbols (Read or Write) Description Enables or disables the requirement of at least one symbol in the password.
iDRAC.SecurityCertificate.CertificateInstance (Read Only) Description Represents the instance of that type of certificate. Legal Values ● Integral values from to Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SecurityCertificate.CertificateType (Read Only) Description Specifies the type of certificate.
Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SecurityCertificate.CertType (Read or Write) Description Specifies the certificate type for CertData used in SCP Import. Possible values are SEKM_SSL_CERT and KMS_SERVER_CA. Legal Values ● SEKM_SSL_CERT ● KMS_SERVER_CA Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SecurityCertificate.
License Required iDRAC Basic Dependancy None iDRAC.SecurityCertificate.IssuerOrganization (Read Only) Description Specifies the organization of the entity that verified the information and signed the certificate. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SecurityCertificate.
iDRAC.SecurityCertificate.SubjectCommonName (Read Only) Description Specifies the common name of the entity a certificate belongs to. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SecurityCertificate.SubjectCountryCode (Read Only) Description Specifies the country code of the entity a certificate belongs to. Legal Values ● String of up to 2 ASCII characters.
Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SecurityCertificate.SubjectState (Read Only) Description Specifies the state of the entity a certificate belongs to. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SecurityCertificate.
iDRAC.SEKM.KeyAlgorithm (Read or Write) Description Indicates the key algorithm to be used by iDRAC when requesting the Key Management Server to generate a key. Legal Values ● AES-256-1 Default Value 1 Write Privilege Configure iDRAC License Required SEKM and iDRAC Enterprise Dependancy None iDRAC.SEKM.Rekey (Read or Write) Description Allows SCP to enable iDRAC rekey operation.
License Required Not applicable Dependancy None iDRAC.SEKMCert The objects in this group help to generate SEKM SSL Certificate. NOTE: If you have a signed SSL SEKM cert that is already uploaded, and if you change iDRAC SEKM cert attributes, you have to: ● Regenerate CSR ● Get it signed on the key management server ● Reupload to iDRAC iDRAC.SEKMCert.CertificateStatus (Read Only) Description Specifies the SEKM CSR Certificate Status.
iDRAC.SEKMCert.EmailAddress (Read or Write) Description Specifies the SEKM CSR Email Address. Legal Values ● String of up to 254 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required SEKM and iDRAC Enterprise Dependancy None iDRAC.SEKMCert.LocalityName (Read or Write) Description Specifies the SEKM CSR Locality Name (L). Legal Values ● String of up to 64 ASCII characters.
Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required SEKM and iDRAC Enterprise Dependancy None iDRAC.SEKMCert.SubjectAltName (Read or Write) Description Specifies the SEKM CSR Subject Alternate Name. Legal Values ● String of up to 1024 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required SEKM and iDRAC Enterprise Dependancy None iDRAC.SEKMCert.
iDRAC.Serial.Command (Read or Write) Description Specifies a serial command that is executed after the user logs into the serial console interface Legal Values ● String of up to 128 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Serial.
iDRAC.Serial.NoAuth (Read or Write) Description Enables or Disables iDRAC serial console login authentication Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SerialCapture This group contains the attributes that provides details about iDRAC serial capture. iDRAC.SerialCapture.Enable (Read or Write) Description Enables or disables serial data capture operation.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SerialRedirection.QuitKey (Read or Write) Description This key or key combination terminates the Virtual Console when using the console COM2 command. The valid quitkey should start with ^ and has to end with any of the following characters: 'a-zA-Z[]^_' (i.e. letter or one of 5 special characters). Legal Values ● String of up to 2 ASCII characters.
iDRAC.ServiceModule This group contains the attributes that provides details about iDRAC Service module. iDRAC.ServiceModule.ChipsetSATASupported (Read or Write) Description Monitors SMART attributes of devices behind chipset SATA controller and audits appropriately in Lifecycle Log. Legal Values ● Disabled-0 ● Enabled-1 ● NA-2 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.ServiceModule.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy iDRAC.ServiceModule.ServiceModuleEnable should be Enabled iDRAC.ServiceModule.iDRACSSOLauncher (Read or Write) Description iDRAC SSO login via Host OS Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.ServiceModule.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy Provide OS information via iDRAC Service Module iDRAC.ServiceModule.ServiceModuleEnable (Read or Write) Description Enable Service Module Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.ServiceModule.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.ServiceModule.WatchdogRecoveryAction (Read or Write) Description Specifies the recovery action on watchdog alert Legal Values ● ● ● ● Default Value 0 Write Privilege Configure iDRAC None-0 Reboot-1 Poweroff-2 Powercycle-3 License Required iDRAC Basic Dependancy The value cannot be set if WatchdogState is 'Disabled'. iDRAC.ServiceModule.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Smartcard This group contains the attributes that provides details about iDRAC Smartcard. iDRAC.SmartCard.SmartCardCRLEnable (Read or Write) Description Enables or disables the Certificate Revocation List (CRL). Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.SmartCard.
iDRAC.SNMP.AgentEnable (Read or Write) Description Enables or Disables the SNMP Agent on the iDRAC Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.SNMP.
Legal Values ● All-0 ● SNMPv3-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.SNMP.TrapFormat (Read or Write) Description SNMP Trap Format Legal Values ● SNMPv1-0 ● SNMPv2-1 ● SNMPv3-2 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.SNMPAlert NOTE: The iDRAC.SNMP.Alert group is deprecated and replaced with iDRAC.
Dependancy None iDRAC.SNMPAlert.SNMPv3Username (Read or Write) Description Specifies the name of the iDRAC user that this SNMP alert destination is configured to use when sending SNMP v3 traps. Legal Values ● String of up to 16 ASCII characters.
Write Privilege Server Configuration License Required iDRAC Basic Dependancy None iDRAC.SNMPTrapIPv4.State (Read or Write) Description See SNMPAlert.1-4.Enable Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Server Configuration License Required iDRAC Basic Dependancy None iDRAC.SNMPTRAPIPv6 This group contains the attributes that provides details about iDRAC SNMP TRAP IPv6. iDRAC.SNMPTrapIPv6.
Default Value 0 Write Privilege Server Configuration License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.SSH This group contains the attributes that provides details about iDRAC SSH. iDRAC.SSH.Banner (Read or Write) Description NA Legal Values ● String of up to 2048 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SSH.
Legal Values ● Integral values from 1 to 65535 Default Value 22 Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy The port number to be set can not be the same as any other service’s port number. iDRAC.SSH.Timeout (Read or Write) Description Defines the secure shell idle timeout. The special value 0 disables the timeout.
iDRAC.SSHCrypto.KexAlgorithms (Read or Write) Description Specifies the SSH key exchange algorithms. Legal Values ● String of up to 1024 ASCII characters. Default Value curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18sha512,diffie-hellman-group14-sha256 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SSHCrypto.
License Required iDRAC Basic Dependancy None iDRAC.SupportAssist.DefaultProtocol (Read or Write) Description Default protocol (NFS/CIFS Only) for saving SupportAssist collections. Legal Values ● ● ● ● ● ● Default Value 2 Write Privilege Configure iDRAC NFS-1 CIFS-2 HTTP-3 HTTPS-4 TFTP-5 FTP-6 License Required iDRAC Basic Dependancy None iDRAC.SupportAssist.
License Required iDRAC Basic Dependancy None iDRAC.SupportAssist.DefaultWorkgroupName (Read or Write) Description Default workgroup name for saving SupportAssist collections to network share. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SupportAssist.EmailOptIn (Read or Write) Description Option to receive E-mails from Dell on case creation and collection upload.
iDRAC.SupportAssist.HostOSProxyAddress (Read or Write) Description Host OS proxy address Legal Values ● String of up to 256 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy HostOSProxyConfigured should be Yes-1 iDRAC.SupportAssist.HostOSProxyConfigured (Read or Write) Description Indicates whether Host OS uses proxy configuration to connect to Internet.
Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy HostOSProxyConfigured should be Yes-1 iDRAC.SupportAssist.iDRACFirstPowerUpDateTime (Read Only) Description iDRAC’s First Power Up Date / Time Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SupportAssist.
iDRAC.SupportAssist.ProSupportPlusRecommendationsReport (Read or Write) Description Indicates whether this server will be included for recommendations in ProSupport Plus Recommendations Report Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy ScheduleBasedAutoCollection is Enabled and set to Weekly or Monthly Schedule iDRAC.SupportAssist.
Dependancy Registration ID needs to be obtained before SupportAssistEnabledState can be toggled. iDRAC.SwitchConnectionView This group contains the attributes that provides details about iDRAC Switch connection view. iDRAC.SwitchConnectionView.Enable (Read or Write) Description This Attribute is for Enabling/Disabling the Switch Connection View. Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.
Legal Values ● String of up to 128 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SysInfo.CMCInfo (Read Only) Description Provides CMC information. Legal Values ● String of up to 128 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SysInfo.CMCIPv6Info (Read Only) Description Provides CMC IPv6 information.
License Required iDRAC Basic Dependancy None iDRAC.SysInfo.FWVersion (Read or Write) Description String displays the current System BIOS Version Number Legal Values ● String of up to 128 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SysInfo.GUID (Read or Write) Description Specifies the system GUID. Legal Values ● String of up to 34 ASCII characters.
iDRAC.SysInfo.RebrandInfo (Read or Write) Description Provides rebrand information. Legal Values ● String of up to 32 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SysInfo.SystemId (Read Only) Description Provides the system ID. Legal Values ● String of up to 4 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.SysInfo.
iDRAC.SysLog.Port (Read or Write) Description Remote syslog port number Legal Values ● Integral values from 1 to 65535 Default Value 514 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.SysLog.PowerLogEnable (Read or Write) Description Enable Power Logs Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.SysLog.
Legal Values ● String of up to 63 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.SysLog.Server3 (Read or Write) Description Name of remote syslog server Legal Values ● String of up to 63 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.SysLog.
iDRAC.Telemetry.RSyslogServer1 (Read or Write) Description Displays the Rsyslog server IPv4/IPv6 address or FQDN. Legal Values ● String of up to 254 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.Telemetry.RSyslogServer1Port (Read or Write) Description Displays the RSyslog server port.
Legal Values ● String of up to 256 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.Telemetry.TelemetrySubscription2 (Read Only) Description Displays the JSON string describing the current Telemetry subscription by a Redfish client or Rsyslog server. Legal Values ● String of up to 256 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.
iDRAC.TelemetryAggregationMetrics.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0 will stop the interval-based report generation. Legal Values ● Integral values from 0 to 0 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryAggregationMetrics.
Legal Values ● Integral values from 0 to 600 Default Value 5 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryCPUMemMetrics.EnableTelemetry (Read or Write) Description Enables or disables the Telemetry Report. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryCPUMemMetrics.
● TRUE-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryCPURegisters This group contains the attributes that provides details about iDRAC telemetry CPU registers. iDRAC.TelemetryCPURegisters.DevicePollFrequency (Read Only) Description Displays the frequency at which the devices are polled.
iDRAC.TelemetryCPURegisters.ReportTriggers (Read or Write) Description Allows to configure the predefined triggers for report generation. Legal Values ● String of up to 512 ASCII characters. Default Value IERRCriticalTrigger Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryCPURegisters.RsyslogTarget (Read or Write) Description Enables or disables the transmission of this report to the configured Rsyslog server.
iDRAC.TelemetryCPUSensor.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0 will stop the interval-based report generation. Legal Values ● Integral values from 60 to 600 Default Value 60 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryCPUSensor.ReportTriggers (Read or Write) Description Allows to configure the predefined triggers for report generation.
iDRAC.TelemetryCUPS.EnableTelemetry (Read or Write) Description Enables or disables the Telemetry Report. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryCUPS.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0 will stop the interval-based report generation.
iDRAC.TelemetryFanSensor This group contains the attributes that provides details about iDRAC telemetry fan sensor. iDRAC.TelemetryFanSensor.DevicePollFrequency (Read Only) Description Displays the frequency at which the devices are polled. Legal Values ● Integral values from 0 to 600 Default Value 5 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryFanSensor.EnableTelemetry (Read or Write) Description Enables or disables the Telemetry Report.
iDRAC.TelemetryFanSensor.RsyslogTarget (Read or Write) Description Enables or disables the transmission of this report to the configured Rsyslog server. Legal Values ● FALSE-0 ● TRUE-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryFCSensor This group contains the attributes that provides details about iDRAC telemetry FC sensor. iDRAC.TelemetryFCSensor.
Dependancy None iDRAC.TelemetryFCSensor.ReportTriggers (Read or Write) Description Allows to configure the predefined triggers for report generation. Legal Values ● String of up to 512 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryFCSensor.RsyslogTarget (Read or Write) Description Enables or disables the transmission of this report to the configured Rsyslog server.
License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryFPGASensor.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0 will stop the interval-based report generation. Legal Values ● Integral values from 60 to 600 Default Value 60 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryFPGASensor.
Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryGPUMetrics.EnableTelemetry (Read or Write) Description Enables or disables the Telemetry Report. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryGPUMetrics.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated.
Dependancy None iDRAC.TelemetryGPUStatistics This group contains the attributes that provides details about iDRAC telemetry GPU statistics. iDRAC.TelemetryGPUStatistics.DevicePollFrequency (Read Only) Description Displays the frequency at which the devices are polled. Legal Values ● Integral values from 0 to 600 Default Value 600 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryGPUStatistics.
License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryGPUStatistics.RsyslogTarget (Read or Write) Description Enables or disables the transmission of this report to the configured Rsyslog server. Legal Values ● FALSE-0 ● TRUE-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryMemorySensor This group contains the attributes that provides details about iDRAC telemetry GPU memory sensor. iDRAC.TelemetryMemorySensor.
Default Value 60 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryMemorySensor.ReportTriggers (Read or Write) Description Allows to configure the predefined triggers for report generation. Legal Values ● String of up to 512 ASCII characters. Default Value MEMCriticalTrigger, MEMWarnTrigger Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryMemorySensor.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryNICSensor.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0 will stop the interval-based report generation.
iDRAC.TelemetryNICStatistics.DevicePollFrequency (Read Only) Description Displays the frequency at which the devices are polled. Legal Values ● Integral values from 0 to 600 Default Value 60 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryNICStatistics.EnableTelemetry (Read or Write) Description Enables or disables the Telemetry Report.
iDRAC.TelemetryNICStatistics.RsyslogTarget (Read or Write) Description Enables or disables the transmission of this report to the configured Rsyslog server. Legal Values ● FALSE-0 ● TRUE-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryNVMeSMARTData This group contains the attributes that provides details about iDRAC telemetry NVMe SMART data. iDRAC.TelemetryNVMeSMARTData.
Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryNVMeSMARTData.ReportTriggers (Read or Write) Description Allows to configure the predefined triggers for report generation. Legal Values ● String of up to 512 ASCII characters. Default Value NVMeCriticalTrigger, NVMeWarnTrigger Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryNVMeSMARTData.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryPowerMetrics.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0 will stop the interval-based report generation.
iDRAC.TelemetryPowerStatistics.DevicePollFrequency (Read Only) Description Displays the frequency at which the devices are polled. Legal Values ● Integral values from 0 to 600 Default Value 60 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryPowerStatistics.EnableTelemetry (Read or Write) Description Enables or disables the Telemetry Report.
iDRAC.TelemetryPowerStatistics.RsyslogTarget (Read or Write) Description Enables or disables the transmission of this report to the configured Rsyslog server. Legal Values ● FALSE-0 ● TRUE-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryPSUMetrics This group contains the attributes that provides details about iDRAC telemetry PSU metrics. iDRAC.TelemetryPSUMetrics.
Dependancy None iDRAC.TelemetryPSUMetrics.ReportTriggers (Read or Write) Description Allows to configure the predefined triggers for report generation. Legal Values ● String of up to 512 ASCII characters. Default Value VLTCriticalTrigger Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryPSUMetrics.RsyslogTarget (Read or Write) Description Enables or disables the transmission of this report to the configured Rsyslog server.
License Required iDRAC Datacenter Dependancy None iDRAC.TelemetrySensor.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0 will stop the interval-based report generation. Legal Values ● Integral values from 60 to 600 Default Value 60 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetrySensor.
Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetrySerialLog.EnableTelemetry (Read or Write) Description Enables or disables the Telemetry Report. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetrySerialLog.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated.
Dependancy None iDRAC.TelemetryStorageDiskSMARTData This group contains the attributes that provides details about iDRAC telemetry storage disk SMART data. iDRAC.TelemetryStorageDiskSMARTData.DevicePollFrequency (Read Only) Description Displays the frequency at which the devices are polled. Legal Values ● Integral values from 0 to 3600 Default Value 3600 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryStorageDiskSMARTData.
iDRAC.TelemetryStorageDiskSMARTData.ReportTriggers (Read or Write) Description Allows to configure the predefined triggers for report generation. Legal Values ● String of up to 512 ASCII characters. Default Value PDRCriticalTrigger, PDRWarnTrigger Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryStorageDiskSMARTData.RsyslogTarget (Read or Write) Description Enables or disables the transmission of this report to the configured Rsyslog server.
Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryStorageSensor.ReportInterval (Read or Write) Description Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0 will stop the interval-based report generation. Legal Values ● Integral values from 60 to 600 Default Value 60 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryStorageSensor.
Default Value 5 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryThermalMetrics.EnableTelemetry (Read or Write) Description Enables or disables the Telemetry Report. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryThermalMetrics.
License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryThermalSensor This group contains the attributes that provides details about iDRAC telemetry thermal sensor. iDRAC.TelemetryThermalSensor.DevicePollFrequency (Read Only) Description Displays the frequency at which the devices are polled. Legal Values ● Integral values from 0 to 600 Default Value 5 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryThermalSensor.
Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.TelemetryThermalSensor.RsyslogTarget (Read or Write) Description Enables or disables the transmission of this report to the configured Rsyslog server. Legal Values ● FALSE-0 ● TRUE-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None iDRAC.Telnet This group contains the attributes that provides details about iDRAC telnet. iDRAC.Telnet.
Default Value 23 Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy The port number to be set can not be the same as any other service’s port number. iDRAC.Telnet.Timeout (Read or Write) Description Defines the Telnet idle timeout. The special value 0 disables the timeout.
iDRAC.Time.TimeZoneOffset (Read or Write) Description Specifies the time zone offset (in minutes) from Greenwich Mean Time (GMT)/Coordinated Universal Time (UTC) to use for the iDRAC Time Legal Values ● Integral values from -43200 to 46800 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.Update This group contains the attributes that provides details about iDRAC update. NOTE: fwUpdateIPAddr attribute is applicable for Monolithic & FX2/FX2s only.
License Required iDRAC Basic Dependancy None iDRAC.USB This group contains the attributes that provides details about iDRAC USB. iDRAC.USB.ConfigurationXML (Read or Write) Description Specifies whether configuration can be performed using USB management port.
iDRAC.USB.ZipPassword (Read or Write) Description Specifies password that is used to unlock zip file containing Server Configuration Profile on USB drive. Legal Values ● String of up to 128 ASCII characters. Default Value None Write Privilege Server Configuration License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None iDRAC.Userdomain This group contains the attributes that provides details about iDRAC userdomain. iDRAC.UserDomain.
Legal Values ● String of up to 254 ASCII characters. Default Value None Write Privilege Configure User License Required iDRAC Basic Dependancy Both UserName and Password must be configured prior to setting a value. iDRAC.Users.
Default Value None Write Privilege Configure User License Required iDRAC Basic Dependancy Cannot be set without User Name being set first iDRAC.Users.Password (Read or Write) Description iDRAC User Password Legal Values ● String of up to 40 ASCII characters. Default Value None Write Privilege Configure User License Required iDRAC Basic Dependancy Cannot be set without User Name being set first iDRAC.Users.PrivacyProtocol (Read or Write) NOTE: The iDRAC.Users.
iDRAC.Users.ProtocolEnable (Read or Write) NOTE: The iDRAC.Users.SNMPv3AuthenticationType attribute is deprecated and replaced with iDRAC.Users.ProtocolEnable attribute. Description Enable SNMP v3 Protocol Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure User License Required iDRAC Basic Dependancy None iDRAC.Users.SHA1v3Key (Read or Write) Description Specifies the SHA1 hash of the SNMPv3 key Legal Values ● String of up to 40 ASCII characters.
iDRAC.Users.Simple2FA (Read or Write) Description Enables or disables Simple 2 Factor Authentication for the user. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure User License Required iDRAC Enterprise or iDRAC Datacenter Dependancy Both UserName and Password must be configured prior to setting to Enabled. iDRAC.Users.
iDRAC.Users.IpmiSerialPrivilege (Read or Write) Description Specifies the maximum IPMI Serial privilege Legal Values ● ● ● ● Default Value 15 Write Privilege Configure User User-2 Operator-3 Administrator-4 No Access-15 License Required iDRAC Basic Dependancy Both UserName and Password must be configured prior to sets iDRAC.vFlashPartition This group contains the attributes that provides details about iDRAC vFlash partition. iDRAC.vFlashPartition.
● Floppy-2 Default Value 0 Write Privilege Virtual Media License Required iDRAC Enterprise Dependancy vFlash SD card has to be enabled. Partition at the specified index has to be created. AttachState should be Detached. iDRAC.vFlashPartition.FormatType (Read Only) Description vFlash Partition Format Type Legal Values ● ● ● ● ● Default Value 0 Write Privilege Virtual Media RAW-0 EXT2-1 EXT3-2 FAT16-3 FAT32-4 License Required iDRAC Enterprise Dependancy vFlash SD card has to be enabled.
iDRAC.vFlashPartition.VolumeLabel (Read Only) Description vFlash Partition Volume Label Legal Values ● String of up to 65 ASCII characters. Default Value 0 Write Privilege Virtual Media License Required iDRAC Enterprise Dependancy vFlash SD card has to be enabled. Partition at the specified index has to be created. iDRAC.vFlashSD This group contains the attributes that provides details about iDRAC vFlash SD. iDRAC.vFlashSD.
iDRAC.vFlashSD.Health (Read Only) Description vFlash SD Health Legal Values ● ● ● ● Default Value 0 Write Privilege Virtual Media OK-0 Critical-1 Warning-2 Unknown-3 License Required iDRAC Enterprise Dependancy vFlashSD has to be enabled iDRAC.vFlashSD.
iDRAC.vFlashSD.Signature (Read or Write) Description Signature Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.vFlashSD.Size (Read Only) Description vFlash SD Size Legal Values ● String of up to 17 ASCII characters. Default Value None Write Privilege Virtual Media License Required iDRAC Enterprise Dependancy vFlashSD has to be enabled iDRAC.vFlashSD.
Dependancy None iDRAC.VirtualConsole.ActiveSessions (Read Only) Description Specifies current active number of Virtual Console sessions. Legal Values ● Integral values from 0 to 6 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.VirtualConsole.AttachState (Read or Write) Description Specifies the attach state for the Virtual Console.
Dependancy None iDRAC.VirtualConsole.EncryptEnable (Read or Write) Description Encrypts the video in a Virtual Console session. Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.VirtualConsole.LocalDisable (Read or Write) Description Enables/disables the video signal on the local video port of the server.
iDRAC.VirtualConsole.PluginType (Read or Write) Description Specifies the plugin type to use when running Virtual Console from a browser. Legal Values ● ActiveX-0 ● Java-1 ● HTML5-2 Default Value 2 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.VirtualConsole.Port (Read or Write) Description Specifies the virtual KVM port.
iDRAC.VirtualConsole.WebRedirect (Read or Write) Description Redirect virtual console and virtual media traffic through the iDRAC web server port. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.VirtualMedia This group contains the attributes that provides details about iDRAC virtual media. iDRAC.VirtualMedia.
License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.VirtualMedia.Enable (Read or Write) Description Enables or disables the Virtual Media. Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRAC.VirtualMedia.
Dependancy None iDRAC.VirtualMedia.MaxSessions (Read Only) Description Provides the maximum number of the Virtual Media sessions allowed. Legal Values ● Integral values from 0 to 1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None iDRC.VNCServer This group contains the attributes that provides details about iDRAC VNC server. iDRAC.VNCServer.
License Required iDRAC Enterprise Dependancy None iDRAC.VNCServer.MaxSessions (Read or Write) Description VNC Server Maximum Session Allowed Legal Values ● Integral values from 1 to 2 Default Value 2 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.VNCServer.Password (Read or Write) Description VNC Server Password Legal Values ● String of up to 8 ASCII characters.
Dependancy None iDRAC.VNCServer.Timeout (Read or Write) Description VNC Server Timeout Legal Values ● Integral values from 60 to 10800 Default Value 300 Write Privilege Configure iDRAC License Required iDRAC Enterprise Dependancy None iDRAC.WebServer This group contains the attributes that provides details about iDRAC web server iDRAC.WebServer.CustomCipherString (Read or Write) Description Specifies the custom cipher string to filter the available in-use TLS cipher suite (e.g.
Default Value 80 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.WebServer.HttpsPort (Read or Write) Description Specifies the port number for HTTPS communication with the iDRAC Legal Values ● Integral values from 1 to 65535 Default Value 443 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.WebServer.
License Required iDRAC Basic Dependancy None iDRAC.WebServer.SSLEncryptionBitLength (Read or Write) Description Specifies the SSL encryption bit length. NOTE: If SSL encryption is set to 256-bit or higher, the cryptography settings for your virtual machine environment (JVM, IcedTea) may require installing the Unlimited Strength java Cryptography Extension Policy Files to permit usage of the iDRAC plugins such as vConsole with level of encryption.
iDRAC.WebServer.TitleBarOptionCustom (Read or Write) Description Specifies the custom title when the title bar option is Custom. Legal Values ● String of up to 30 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None iDRAC.WebServer.TLSProtocol (Read or Write) Description Specifies the TLS protocol version support. Legal Values ● TLS 1.0 and Higher-0 ● TLS 1.1 and Higher-1 ● TLS 1.
5 InfiniBand Attributes This section provides details about the InfiniBand attribute groups and objects. NOTE: See the racadm help for possible values instead of using numeric values to enable or disable the InfiniBand attributes . Topics: • • • • • • • • • InfiniBand.DCBSettings InfiniBand.DeviceLevelConfig InfiniBand.FrmimgMenu InfiniBand.IscsiFirstTgtParams InfiniBand.IscsiGenParams InfiniBand.IscsiInitiatorParams InfiniBand.NICConfig InfiniBand.NICPartitioningConfig InfiniBand.
InfiniBand.DCBSettings.PriorityFlowControl (Read Only) Description Indicates whether the Priority Flow Control capability is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege Login License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.DeviceLevelConfig The following section provides information about the objects in the InfiniBand.DeviceLevelConfig group. InfiniBand.DeviceLevelConfig.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.DeviceLevelConfig.PartitionStateInterpretation (Read Only) Description Describes how partitioning is implemented and how the PartitionState attribute is used in the controller. A value of Fixed signifies that partition states are locked and that the current values of PartitionState[n] will not change.
InfiniBand.DeviceLevelConfig.SRIOVSupport (Read Only) Description Indicates whether SR-IOV capability is supported. Legal Values ● Available ● Unavailable Default Value N/A Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.DeviceLevelConfig.VFAllocBasis (Read Only) Description Defines the domain in which Virtual Functions are allocated; either Port or Device.
will be replaced with {3}). The vendor must provide the appropriate default string for the implementation. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable InfiniBand.DeviceLevelConfig.VirtualizationMode (Read or Write) Description The Virtualization Mode setting for the device. Specifies the type of virtualization used by the controller on all ports.
InfiniBand.IscsiFirstTgtParams The following section provides information about the objects in the InfiniBand.IscsiFirstTgtParams group. InfiniBand.IscsiFirstTgtParams.ConnectFirstTgt (Read or Write) Description Enables or disables connecting to the first iSCSI target. Not available if VndrConfigPage.iSCSIBootSupport is unavailable. Legal Values ● Enabled ● Disabled Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.
License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.IscsiFirstTgtParams.FirstTgtIpAddress (Read or Write) Description IP address of the first iSCSI target. Legal Values ● Valid IPv4 or IPv6 address Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.IscsiFirstTgtParams.FirstTgtIscsiName (Read or Write) Description iSCSI Qualified Name (IQN) of the first iSCSI storage target.
Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.IscsiGenParams.ChapMutualAuth (Read or Write) Description To use mutual CHAP authentication, specifies an initiator secret on the Initiator Parameters page and configure that secret on the target. Legal Values ● Enabled ● Disabled Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.IscsiGenParams.
Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.IscsiGenParams.TcpIpViaDHCP (Read or Write) Description Setting to enable acquisition of IPv4 TCP/IP parameters from DHCP. Legal Values ● Enabled ● Disabled Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.
InfiniBand.IscsiInitiatorParams.IscsiInitiatorGateway (Read or Write) Description Specifies the default gateway of the iSCSI initiator. Legal Values ● String from 2 - 39 characters (IPv4 or IPv6 gateway) Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.IscsiInitiatorParams.IscsiInitiatorIpAddr (Read or Write) Description Specifies the IP address of the iSCSI initiator.
InfiniBand.IscsiInitiatorParams.IscsiInitiatorSubnet (Read or Write) Description Specifies the IPv4 Subnet Mask of the iSCSI initiator. Legal Values ● String from 7 - 15 characters (IPv4 Subnet) Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.NICConfig The following section provides information about the objects in the InfiniBand.NICConfig group. InfiniBand.NICConfig.
Legal Values ● ● ● ● Default Value AutoDetect Write Privilege Server Control AutoDetect - 0 BBS - 1 Int18h - 2 Int19h - 3 License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.NICConfig.LegacyBootProto (Read or Write) Description Selects a non-UEFI network boot protocol.
Dependency Not applicable InfiniBand.NICPartitioningConfig The following section provides information about the objects in the InfiniBand.NICPartitioningConfig group. InfiniBand.NICPartitioningConfig.NumberPCIFunctionsEnabled (Read Only) Description The number of PCI Physical Functions currently enabled on this port. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable InfiniBand.NICPartitioningConfig.
InfiniBand.VndrConfigPage.BusDeviceFunction (Read only) Description BIOS assigned PCIe. The value of this attribute depends on the state of the NParEP Mode setting. If NParEP Mode is Disabled, the value is the BIOS assigned PCIe Bus:Device:Function identifier. If NParEP Mode is Enabled, the value is the BIOS assigned PCIe Bus:Function identifier.
InfiniBand.VndrConfigPage.EnergyEfficientEthernet (Read only) Description Indicates whether Energy Efficient Ethernet capability is supported. Legal Values ● None Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.FCoEBootSupport (Read only) Description Indicates whether Fibre Channel over Ethernet Boot capability is supported.
Legal Values ● None Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.iSCSIBootSupport (Read Only) Description Indicates whether iSCSI Boot is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable InfiniBand.VndrConfigPage.
Legal Values ● None Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.MacAddr (Read only) Description Permanent MAC address assigned during manufacturing. Legal Values ● String of up to 17 characters Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.
Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable InfiniBand.VndrConfigPage.NodeGUID (Read Only) Description The Permanent Node GUID assigned during manufacturing. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable InfiniBand.VndrConfigPage.
Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.PCIDeviceID (Read only) Description PCI Device ID of the port. Legal Values ● String of up to 4 characters Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.PortGUID (Read Only) Description The Permanent Port GUID assigned during manufacturing.
License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.RemotePHY (Read only) Description Indicates whether RemotePHY capability is supported. Legal Values ● None Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.RXFlowControl (Read Only) Description Indicates whether Receive (RX) Flow control capability is supported.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable InfiniBand.VndrConfigPage.TOESupport (Read only) Description Indicates whether TCP/IP Offload Engine capability is supported. Legal Values ● None Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable InfiniBand.VndrConfigPage.VirtMacAddr (Read or Write) Description Programmatically assignable MAC address. Programmatic write for support of I/O Identity feature. Legal Values ● String of up to 17 characters Default Value None Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependancy None InfiniBand.VndrConfigPage.
6 Lifecycle Controller Attributes This section provides details about the Lifecycle Controller attribute groups and objects. Topics: • • LifecycleController.LCAttributes LifecycleController.OSD LifecycleController.LCAttributes This group contains the Lifecycle controller LC attributes details. NOTE: A job successfully configured using the autoupdate or autobackup feature settings can be deleted only if the job is currently not running or downloading. LifecycleController.LCAttributes.
Default Value 0 Write Privilege Server Configuration License Required iDRAC Enterprise Dependancy None LifecycleController.LCAttributes.BIOSRTDRequested (Read or Write) Description Allows to reset all the BIOS attributes to the default state. After this property is enabled, restart the server to view the default values of BIOS.
LifecycleController.LCAttributes.IgnoreCertWarning (Read or Write) Description Ignore Certificate warning default when not provided. Legal Values ● Off-0 ● On-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None LifecycleController.LCAttributes.IPAddress (Read or Write) Description IP Address of the network share Legal Values ● String of up to 255 ASCII characters.
LifecycleController.LCAttributes.LifecycleControllerState (Read or Write) Description Enables or disables Lifecycle Controller. Legal Values ● Disabled-0 ● Enabled-1 ● Recovery-2 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None LifecycleController.LCAttributes.PartConfigurationUpdate (Read or Write) Description Apply hardware configuration to the replaced part on part replacement.
Default Value None Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None LifecycleController.LCAttributes.StorageHealthRollupStatus (Read Only) Description Specifies the storage health rollup status. Legal Values ● Integral values from 1 to 4 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None LifecycleController.LCAttributes.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None LifecycleController.LCAttributes.UserProxyServer (Read or Write) Description Proxy Server default if not provided. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None LifecycleController.LCAttributes.
Write Privilege Configure iDRAC License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependancy None LifecycleController.OSD This group contains the Lifecycle controller OSD attributes details. LifecycleController.OSD.AnswerFileName (Read Only) Description Specifies the Name of the Answer File present on the share to be used for OS Deployment. Configurable via Server Configuration Profile (SCP) feature only. Legal Values ● String of up to 64 ASCII characters.
Legal Values ● String of up to 6 ASCII characters. Default Value None Write Privilege Not Applicable License Required iDRAC Basic Dependancy None LifecycleController.OSD.OSMediaName (Read Only) Description Specifies the Name of the OS media present on the share to be used for OS Deployment. Configurable via Server Configuration Profile (SCP) feature only. Legal Values ● String of up to 64 ASCII characters.
Default Value None Write Privilege Not Applicable License Required iDRAC Basic Dependancy None LifecycleController.OSD.OSMediaSharePassword (Read Only) Description Specifies the Password for the share that contains OS media for OS Deployment. Configurable via Server Configuration Profile (SCP) feature only. Legal Values ● String of up to 128 ASCII characters. Default Value None Write Privilege Not Applicable License Required iDRAC Basic Dependancy None LifecycleController.OSD.
Write Privilege Not Applicable License Required iDRAC Basic Dependancy None LifecycleController.OSD.SupportedOSList (Read Only) Description Lists all the supported Operating Systems for OS Deployment. Configurable via Server Configuration Profile (SCP) feature only. Legal Values ● String of up to 1024 ASCII characters.
7 NIC Attributes This section provides details about the NIC attribute groups and objects. Topics: • • • • • • • • • • • • • • • • • • NIC.ConfigureFormn NIC.DCBSettings NIC.DeviceLevelConfig NIC.FCOECapabilities NIC.FCOEConfiguration NIC.FCOEGenParams NIC.FrmimgMenu NIC.GlobalBandwidthAllocation NIC.iSCSIConfig NIC.IscsiFirstTgtParams NIC.IscsiGenParams NIC.IscsiInitiatorParams NIC.IscsiSecondaryDeviceParams NIC.IscsiSecondTgtParams NIC.NICConfig NIC.NICPartitioningConfig NIC.PortLevelConfig NIC.
Legal Values ● Enabled ● Disabled Default Value Disabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.ConfigureFormn.FIPMacAddr (Read Only) Description Permanent FIP-MAC address for FCoE assigned during manufacturing. Specified on a per partition basis. Replace n with the number of the partition. If supported, the current address value should be readable at all times, irrespective of feature and partition enablement.
NIC.ConfigureFormn.IscsiMacAddr (Read Only) Description Permanent MAC address for iSCSI offload assigned during manufacturing. Specified on a per partition basis. Replace n with the number of the partition. If supported, the current address value should be readable at all times, irrespective of feature and partition enablement. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.ConfigureFormn.
NIC.ConfigureFormn.L2IscsiMacAddr (Read Only) Description The Permanent combination Ethernet and iSCSI Offload MAC address of the partition assigned during manufacturing. Replace n with the number of the partition. The current address value should be readable at all times, irrespective of feature and partition enablement. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.ConfigureFormn.
NIC.ConfigureFormn.NumberVFAdvertised (Read or Write) Description This value is the number of PCI Virtual Functions Advertised by the partition in PCI config space when operating in the NPar+SR-IOV virtualization mode. The value of this attribute may be the same across partitions or be settable on an individual partition basis depending on implementation. Note: This attribute is only defined for the browser and does NOT have any x-UEFI mapping.
NIC.ConfigureFormn.PortNumber (Read Only) Description Port that the partition belongs to. Replace n with the number of the partition. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.ConfigureFormn.SVID (Read or Write) Description When Switch Dependent Partitioning (SDP) is enabled,each partition will be assigned a pre-set Switch VLAN Identifier (SVID).
Default Value 00:00:00:00:00:00 Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.ConfigureFormn.VirtIscsiMacAddr (Read or Write) Description Programmatically assignable MAC address for iSCSI offload. Programmatic write for support of I/O Identity feature. Replace n with the number of the partition. The supported method of reverting to the permanent MAC address is by writing 0's as the virtual address.
NIC.ConfigureFormn.VirtL2IscsiMacAddr (Read or Write) Description Programmatically assignable combination MAC address for Ethernet and iSCSI offload. Programmatic write for support of I/O Identity feature. Replace n with the number of the partition. The supported method of reverting to the permanent MAC address is by writing 0's as the virtual address. If the virtual address has not been set or if it has been cleared by the defined method, its value shall be returned as 0's.
Default Value 0000:0000:0000:0000 Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.ConfigureFormn.VirtWWN (Read or Write) Description Programmatically assignable Fibre Channel World Wide Node Name identifier for FCoE. Virtual addresses written will also be modified by subsequent writes to the VirtFIP-MAC addesss as defined in Y741D. Replace n with the number of the partition.
Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DCBSettings The following section provides information about the objects in the NIC.DCBSettings group. NIC.DCBSettings.CongestionNotification (Read Only) Description Indicates whether Congestion Notification capability is supported.
NIC.DCBSettings.PriorityGroup0BandwidthAllocation (Read or Write) Description Indicates the percentage of total port bandwidth is assigned to Priority Group 0. The summation of bandwidth allocations from all Priority Groups must equal 100%. Note: NO X-UEFI Mapping Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DCBSettings.
● FCoE ● RoCE ● None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DCBSettings.PriorityGroup1BandwidthAllocation (Read or Write) Description Indicates the percentage of total port bandwidth is assigned to Priority Group 1. The summation of bandwidth allocations from all Priority Groups must equal 100%.
Dependency Not applicable NIC.DCBSettings.PriorityGroup2ProtocolAssignment (Read or Write) Description Indicates what protocol is assigned to Priority Group 2. Legal Values ● ● ● ● ● Default Value None Write Privilege None All other LAN iSCSI FCoE RoCE None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DCBSettings.PriorityGroup3BandwidthAllocation (Read or Write) Description Indicates the percentage of total port bandwidth is assigned to Priority Group 3.
NIC.DCBSettings.PriorityGroup4BandwidthAllocation (Read or Write) Description Indicates the percentage of total port bandwidth is assigned to Priority Group 4. The summation of bandwidth allocations from all Priority Groups must equal 100%. Note: NO X-UEFI Mapping Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DCBSettings.
● FCoE ● RoCE ● None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DCBSettings.PriorityGroup6BandwidthAllocation (Read or Write) Description Indicates the percentage of total port bandwidth is assigned to Priority Group 6. The summation of bandwidth allocations from all Priority Groups must equal 100%.
Dependency Not applicable NIC.DCBSettings.PriorityGroup7ProtocolAssignment (Read or Write) Description Indicates what protocol is assigned to Priority Group 7. Legal Values ● ● ● ● ● Default Value None Write Privilege None All other LAN iSCSI FCoE RoCE None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DCBSettings.PriorityGroupBandwidthAllocation (Read or Write) Description Defines the allocation of network port bandwidth by Priority Group.
Dependency Not applicable NIC.DeviceLevelConfig.NParEP (Read or Write) Description Controls enablement of NParEP mode in which more than 8 PCI Physical Functions are exposed by the device. When disabled, the device must expose only a maximum of 8 PFs in the traditional PCI B:D:F addressing mode, regardless of any ARI capability being advertised for SR-IOV support.
Legal Values ● N/A Default Value 0 Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DeviceLevelConfig.NumPorts (Read or Write) Description Configuration control for Controllers that have the ability to support different port counts per SFF (e.g., SFP-DD, QSFP) or backplane interface. Controllers on implementations that are fixed in their number of ports shall not implement this attribute.
Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DeviceLevelConfig.RDMAProtocolSupport (Read Only) Description Indicates what RDMA protocol support is enabled by the controller. Implement as ReadOnly and browser suppressed if the controller only supports one type of RDMA; R/W and not browser suppressed if multiple settings are supported and selectable.
NIC.DeviceLevelConfig.TotalNumberLogicalPorts (Read or Write) Description Indicates total number of logical ports across all physical ports that are supported per device. Logical ports are distributed equally across physical ports Legal Values ● 2 ● 8 Default Value 2 Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.DeviceLevelConfig.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NOTE: For Emulex cards, the VirtualizationMode attribute is found under the VndrConfigPage group instead of the DeviceLevelConfig group. NIC.FCOECapabilities The following section provides information about the objects in the NIC.FCOECapabilities group. NIC.FCOECapabilities.
Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.FCOECapabilities.MaxNumberExchanges (Read Only) Description The maximum number of exchanges supported. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.FCOECapabilities.MaxNumberLogins (Read Only) Description The maximum number of logins supported per port.
NIC.FCOEConfiguration The following section provides information about the objects in the NIC.FCOEConfiguration group. NIC.FCoEConfiguration.BootOrderFirstFCoETarget (Read or Write) Description Setting to specify whether and in what order a boot from the port's first defined target is attempted. The current implementation allows for four potential boot targets to be defined per FCoE boot-capable port. Each target carries a boot order attribute.
NIC.FCoEConfiguration.BootOrderThirdFCoETarget (Read or Write) Description Setting to specify whether and in what order a boot from the port's third defined target is attempted. Legal Values ● N/A Default Value 0 Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.FCoEConfiguration.ConnectFirstFCoETarget (Read or Write) Description Setting to enable whether first target connection is attempted.
NIC.FCoEConfiguration.FirstFCoEBootTargetLUN (Read or Write) Description LUN of the first FCoE storage target that the FCoE initiator will boot the system from when the Connect attribute is enabled. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.FCoEConfiguration.FirstFCoEFCFVLANID (Read or Write) Description Attribute for configuring the VLAN ID to be used to connect to the first FC storage target.
NIC.FCOEGenParams The following section provides information about the objects in the NIC.FCOEGenParams group. NIC.FCoEGenParams.FCoEBootScanSelection (Read or Write) Description Configuration of the port's behavior in booting the system from FC Target(s). Only behaviors supported by the option-ROM need to be implemented. In the following cases, no fabric discovery shall be attempted: Disabled - Initiator does not attempt to boot.
Dependency Not applicable NIC.FCoEGenParams.FCoELnkUpDelayTime (Read or Write) Description Controls how long the FCoE initiator waits, in seconds, after an Ethernet link is established before sending any data over the network Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.FCoEGenParams.
Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.FrmwImgMenu.EFIVersion (Read Only) Description EFI device driver version information. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.FrmwImgMenu.FamilyVersion (Read Only) Description Firmware family version information.
Default Value 0 Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.iSCSIConfig The following section provides information about the objects in the NIC.iSCSIConfig group. NIC.iSCSIConfig.IscsiFirstTgtParams (Read Only) Description HII form title for the first iSCSI target configuration parameters. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.
Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.iSCSIConfig.IscsiInitiatorParams (Read Only) Description HII form title for the iSCSI initiator configuration form. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.iSCSIConfig.IscsiInitiatorParamsRef (Read Only) Description Link to the iSCSI Initiator parameters configuration form.
NIC.iSCSIConfig.IscsiSecondTgtParams (Read Only) Description The HII form title for the second iSCSI target configuration form. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.iSCSIConfig.IscsiSecondTgtParamsRef (Read Only) Description The link to the iSCSI Second Target Parameters configuration form.
NIC.IscsiFirstTgtParams.FirstTgtChapId (Read or Write) Description First Target CHAP ID (up to 128 characters in length). If only a single value of CHAP ID supported then it is stored here. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiFirstTgtParams.FirstTgtChapPwd (Read or Write) Description First Target CHAP Secret ( 0 or 12 to 16 characters in length).
NIC.IscsiFirstTgtParams.FirstTgtIscsiName (Read or Write) Description The iSCSI Qualified Name (IQN) of the first target. Legal Values None Default Value NOTE: The legal value range may be smaller than the maximum size of 223, based on the vendor configuration of the NIC cards. None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiFirstTgtParams.FirstTgtTcpPort (Read or Write) Description TCP Port number of the first iSCSI target.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiGenParams.DhcpVendId (Read or Write) Description Vendor ID as presented to DHCP service. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiGenParams.FirstHddTarget (Read or Write) Description Enable/Disable the target appearing as the first hard disk drive (HDD) in the system when iSCSI booting.
License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiGenParams.IscsiTgtBoot (Read or Write) Description Boot to iSCSI target after connection. Legal Values ● Enabled ● Disabled ● One Time Disabled Default Value Disabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiGenParams.IscsiViaDHCP (Read or Write) Description Setting to enable acquisition of iSCSI target parameters from DHCP.
Dependency Not applicable NIC.IscsiGenParams.LnkUpDelayTime (Read or Write) Description The time to wait for the link to establish before driver initialization. Legal Values None Default Value 0 Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiGenParams.LunBusyRetryCnt (Read or Write) Description Controls the retry count for target.
NIC.IscsiGenParams.WinHbaBootMode (Read or Write) Description Controls if adapter boots as an iSCSI Offload HBA or uses software initiator mode Legal Values ● Enabled ● Disabled Default Value Disabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiInitiatorParams The following section provides information about the objects in the NIC.IscsiInitiatorParams group. NIC.IscsiInitiatorParams.
Dependency Not applicable NIC.IscsiInitiatorParams.IscsiInitiatorIpAddr (Read or Write) Description The iSCSI initiator IP address. Will be either in IPv4 or IPv6 format depending on value of the IpVer attribute. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiInitiatorParams.
NIC.IscsiInitiatorParams.IscsiInitiatorIpv4SecDns (Read or Write) Description iSCSI initiator Secondary DNS IP address in IPv4 format when iSCSIDualIPVersionSupport is Available. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiInitiatorParams.IscsiInitiatorIpv6Addr (Read or Write) Description The iSCSI initiator IP address in IPv6 format when iSCSIDualIPVersionSupport is available.
Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiInitiatorParams.IscsiInitiatorName (Read or Write) Description Setting to represent and set the iSCSI initiator iSCSI Qualified Name (IQN). Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiInitiatorParams.
Dependency Not applicable NIC.IscsiInitiatorParams.IscsiInitiatorSubnetPrefix (Read or Write) Description The iSCSI initiator Subnet Mask Prefix for an IPv6 initiator configuration. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiSecondaryDeviceParams The following section provides information about the objects in the NIC.IscsiSecondaryDeviceParams group. NIC.IscsiSecondaryDeviceParams.
Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiSecondTgtParams To configure the iSCSIsecond storage, use the objects in this group. NIC.IscsiSecondTgtParams.ConnectSecondTgt (Read or Write) Description Setting to enable whether connection to the second target is attempted. Legal Values ● Enabled ● Disabled Default Value Disabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.
Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiSecondTgtParams.SecondTgtIpAddress (Read or Write) Description Second iSCSI target IP address. Will be either IPv4 or IPv6 format depending on the value of the SecondTgtIpVer attribute Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.IscsiSecondTgtParams.
Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.NICConfig To configure the NICConfig properties, use the objects in this group. NIC.NICConfig.BannerMessageTimeout (Read or Write) Description Timeout in seconds for banner display during POST Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.NICConfig.
NIC.NICConfig.BootStrapType (Read or Write) Description Configure the boot strap mechanism used to boot to the OS. Legal Values ● ● ● ● Default Value AutoDetect Write Privilege None Auto Detect BBS Int 18h Int 19h License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.NICConfig.FWBootProtocol (Read or Write) Description Selection of the boot protocol for the CNA port when the boot process is local to the controller.
● iSCSI Secondary ● iPXE without failover ● iSCSI without failover Default Value varies Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.NICConfig.LnkSpeed (Read or Write) Description Selector for link speed(s) to be advertised to link partner for boot operations. Implementations should only include supported link speeds.
NIC.NICConfig.PermitTotalPortShutdown (Read or Write) Description When implemented and enabled, any port down command from the host OS or driver will cause the network port to completely shut down and cease all operations including support of WoL and NC-SI Passthrough. Shutdown is defined as no electrical activity (e.g., PHY disabled) and no LED activity. It does not imply or require any physical or electrical isolation. Not intended for implementation or use on backplane designs.
NIC.NICConfig.WakeOnLanLnkSpeed (Read or Write) Description Selector for link speed(s) to be advertised to link partner for Vaux operations including Wake On LAN and shared LOM management features. Implementations should only include supported link speeds. Existing implementations may remain unchanged, new implementations should not use those speeds listed as deprecated but use the new speeds that have been added that infer what modulation scheme is in use, NRZ or PAM4.
NIC.NICPartitioningConfig.ConfigureFormRef (Read Only) Description Link for Partition Configuration form. Individual configuration forms are required for each partition. Replace n with the number of the partition. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.NICPartitioningConfig.FlowControlSetting (Read or Write) Description Representation and configuration field for Ethernet Flow Control.
Dependency Not applicable NIC.NICPartitioningConfig.NicPartitioning (Read or Write) Description Representation and configuration of enablement of partitioning for the device. Note: This attribute is for current HII/UEFI drivers that implement the control ONLY. New HII implementations should only implement the Virtualization Mode attribute. Existing implementations should maintain support for legacy reasons.
Default Value Enabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.NICPartitioningConfig.RDMANICModeOnPartition (Read or Write) Description Enable/Disable the NIC + RDMA personality on the partition. This setting is for when operating in NPar mode only. Replace n with the number of the partition. Note: This personality type may be specified as the partition default if RDMA traffic can be supported irrespective of any other device setting.
NIC.VndrConfigPage.BlnkLeds (Read or Write) Description Blink LEDs for a duration of up to 15 seconds. Only valid for adapters with link LEDs. Legal Values None Default Value 15 Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.BusDeviceFunction (Read Only) Description The value of this attribute depends on the state of the NParEP Mode setting.
NIC.VndrConfigPage.DCBSettingsRef (Read Only) Description Configuration page form reference for Data Center Bridge (DCB) Settings Form. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.DCBXSupport (Read Only) Description Indicates whether Data Center Bridging eXchange Protocol (DCBX) is supported.
Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.EEEControl (Read or Write) Description Enables or Disables the Energy Efficient Ethernet feature on the port if supported by the device. If the scope of the control is not port level, then consultation with Dell is required.
NIC.VndrConfigPage.FCOECapabilities (Read Only) Description HII form title for the FCoE Capabilities form. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.FCoECapabilitiesRef (Read Only) Description Configuration page form reference for the FCoE Capabilities Form.
● Disabled Default Value Disabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.FCoEOffloadSupport (Read Only) Description Indicates whether FCoE is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.
Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.ForwardErrorCorrection (Read or Write) Description Type of FEC to use on the link. Shall not be implemented on adapters where it is not appropriate. Legal Values ● ● ● ● Default Value Auto Write Privilege None Auto Fire Code (Clause 74) RS-FEC (Clause 91, 108, 134) Disabled License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.
Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.iSCSIBootSupport (Read Only) Description Indicates whether iSCSI Boot is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.iSCSIConfig (Read Only) Description HII form title for port level iSCSI configuration.
Dependency Not applicable NIC.VndrConfigPage.IscsiMacAddr (Read Only) Description Permanent MAC address for iSCSI offload assigned during manufacturing. If supported, the current address value should be readable at all times, irrespective of feature enablement. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.
NIC.VndrConfigPage.MacAddr (Read Only) Description The Permanent MAC address assigned during manufacturing. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.MediaDetection (Read or Write) Description Optional attribute for those implementations that support the querying of the installed SFF device capabilities to assist in link configuration.
NIC.VndrConfigPage.NICConfigRef (Read Only) Description The Configuration form reference for port level NIC configuration. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.NicMode (Read or Write) Description Enable/Disable the NIC personality on the port. This setting is for when operating in non-NPar mode only.
NIC.VndrConfigPage.NodeGUID (Read Only) Description The Permanent Node GUID assigned during manufacturing. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.NWManagementPassThrough (Read Only) Description Indicates whether the Network Management Pass Through capability is supported.
NIC.VndrConfigPage.OSBMCManagementPassThrough (Read Only) Description Indicates whether OS-BMC Management Pass Through capability is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.PCIDeviceID (Read Only) Description PCI Device ID reported by the controller when operating in non-NPar mode only.
NIC.VndrConfigPage.PXEBootSupport (Read Only) Description Indicates whether the PXE Boot capability is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.RDMANICModeOnPort (Read or Write) Description Enable/Disable the NIC + RDMA personality on the port. This setting is for when operating in non-NPar mode only.
NIC.VndrConfigPage.SNAPI (Read Only) Description Indicates the adapter supports SNAPI functionality by either special interfacing to the PCI slot connector or via cabling to another PCI slot. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.SNAPIState (Read Only) Description Indicates whether SNAPI functionality is enabled.
NIC.VndrConfigPage.TXBandwidthControlMaximum (Read Only) Description Indicates whether Transmit(TX) Bandwidth Control Maximum capability is supported Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.
NIC.VndrConfigPage.VirtIscsiMacAddr (Read or Write) Description Programmatically assignable MAC address for iSCSI offload. Programmatic write for support of I/O Identity feature. The supported method of reverting to the permanent MAC address is by writing 0's as the virtual address. If the virtual address has not been set or if it has been cleared by the defined method, its value shall be returned as 0's.
Default Value 0000:0000:0000:0000 Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.VirtWWN (Read or Write) Description Programmatically assignable Fibre Channel World Wide Node Name identifier for FCoE. Virtual addresses written will also be modified by subsequent writes to the VirtFIP-MAC addesss as defined in Y741D. The supported method of clearing this virtual address is by writing 0's as the address.
Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.VPI (Read Only) Description Indicates whether Virtual Protocol Interconnect (VPI) functionality is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable NIC.VndrConfigPage.
8 Storage Attributes This section provides details about the Storage attribute groups and objects. Topics: • • • • Storage.Controller Storage.Enclosure Storage.PhysicalDisk Storage.VirtualDisk Storage.Controller The following sections provide information about the objects in this group Storage.Controller. Storage.Controller.
Default Value Normal Write Privilege Server Configuration License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.Controller.CheckConsistencyRate (Read or Write) Description The Check Consistency rate is the percentage of the system's resources dedicated to performing a check consistency on a redundant virtual disk.
NOTE: You need to enable SEKM on iDRAC before enabling SEKM on the PERC controller. Storage.Controller.ControllerRekey (Read or Write) Description This pseudo attribute represents whether a rekey operation needs to be performed on the RAID controller. Configurable via Server Configuration Profile (SCP) feature only. Legal Values ● True ● False Default Value FALSE Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.Controller.
Storage.Controller.EnhancedAutoImportForeignConfiguration (Read or Write) Description This indicates the current EnhancedAutoImportForeignConfig setting of the controller. Configurable via Server Configuration Profile (SCP) feature only. Legal Values ● Disabled ● Enabled Default Value None Write Privilege None License Required NA Dependency None Storage.Controller.
Dependency Applicable only if 'RAIDrekey' is set to True Storage.Controller.PatrolReadMode (Read or Write) Description Patrol Read is a feature for identifying disk errors in order to avoid disk failures and data loss or corruption. The Patrol Read only runs on disks that are being used in a virtual disk or that are hot spares.
Dependency None Storage.Controller.PossibleloadBalancedMode (Read or Write) Description This attribute represents the ability to automatically use both controller ports connected to the same enclosure to route I/O requests. Legal Values ● Automatic ● Disabled Default Value Automatic Write Privilege Serverl Control License Required iDRAC Express or iDRAC Enterprise Dependency None Storage.Controller.
Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.Controller.RAIDmaxSpansInVD (Read Only) Description This attribute represents the maximum number of spans in a Virtual Disk, as supported by the controller. Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.Controller.
License Required iDRAC Express or iDRAC Enterprise Dependency None Storage.Controller.RAIDResetConfig (Read or Write) Description This pseudo attribute represents whether a reset config operation needs to be performed on the RAID controller. Reset config operation deletes all the virtual disks that exist on the RAID controller. Configurable via Server Configuration Profile (SCP) feature only.
Write Privilege None License Required NA Dependency None Storage.Controller.RAIDSupportedRAIDLevels (Read Only) Description This attribute provides a list of RAID levels supported by the controller. NOTE: Some RAID levels may not be supported depending on the type of storage controller installed. Legal Values ● ● ● ● ● ● Default Value None Write Privilege None RAID-0 RAID-1 RAID-5 RAID-10 RAID-50 RAID-60 License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.
Legal Values ● True ● False Default Value FALSE Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.Controller.RequestedControllerMode (Read or Write) Description This indicates controllers requested personaility mode and can be RAID or Non-RAID. PERC 9 supports RAID and HBA. Starting PERC 10, modes supported are RAID and Enhanced HBA.
Storage.Controller.SupportRAID10UnevenSpans (Read Only) Description Indicates if this controller supports uneven spans for RAID 10. Legal Values ● Supported ● Not Supported Default Value Not Applicable Write Privilege Not Applicable License Required iDRAC Express or iDRAC Enterprise Dependency None Storage.Controller.T10PICapability (Read Only) Description Indicates if this controller supports T10 PI.
Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.Enclosure.BackplaneCurrentMode (Read Only) Description Displays the current backplane zone setting. Legal Values ● ● ● ● ● ● ● ● Default Value UnifiedMode Not Applicable UnifiedMode SplitMode SplitMode-4:20 SplitMode-8:16 SplitMode-16:8 SplitMode-20:4 SplitMode-6:6:6:6 NOTE: If the backplane does not support zoning, the default value is Not Applicable.
Default Value Non-Shared Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Backplane must be universal to support this attribute. Storage.Enclosure.RAIDEffectiveSASAddress (Read Only) Description This attribute represents the effective SAS Address of an enclosure. Legal Values ● String of up to 16 characters Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.Enclosure.
NOTE: These attributes are applicable only for SAS/SATA drives and not for PCIeSSD. Storage.PhysicalDisk.BlockSizeInBytes (Read Only) Description This property indicates the logical block size of the physical drive that this virtual disk belongs to. Legal Values ● 512 ● 4096 Default Value Not Applicable Write Privilege Not Applicable License Required iDRAC Express or iDRAC Enterprise Dependency None Storage.PhysicalDisk.
Legal Values ● ● ● ● ● Default Value Not Applicable Write Privilege Not Applicable Unknown 1.5Gbps 3Gbps 6Gbps 12Gbps License Required iDRAC Express or iDRAC Enterprise Dependency None Storage.PhysicalDisk.MediaType (Read Only) Description Indicates the media Type of the physical disk like HDD or SSD. Legal Values ● Solid State Drive ● Hard Disk Drive Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.
Dependency None Storage.PhysicalDisk.PCIeSSDsecureErase (Read or Write) Description This operation performs cryptographic erase on the PCIe SSD device, configurable via Server Configuration Profile (SCP) feature only. Legal Values ● True ● False Default Value False Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.Physical Disk.
Storage.PhysicalDisk.RaidType (Read Only) Description Indicates the metadata type on the disk. Legal Values ● ● ● ● Default Value N/A Write Privilege None None Software RAID Windows Software RAID Hardware RAID License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.PhysicalDisk.SoftwareRAIDMode (Read or Write) Description Indicates the metadata type on the disk. Configurable via Server Configuration Profile (SCP) feature only.
Storage.VirtualDisk This group contains the attributes that provides details about Storage.VirtualDisk Storage.VirtualDisk.BlockSizeInBytes (Read Only) Description This property indicates the logical block size of the physical drive that this virtual disk belongs to. Legal Values ● 512 ● 4096 Default Value Not Applicable Write Privilege Not Applicable License Required iDRAC Express or iDRAC Enterprise Dependency None Storage.VirtualDisk.
Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency None Storage.VirtualDisk.DiskCachePolicy (Read or Write) Description Set the physical disk caching policy of all members of a Virtual Disk by enabling the Disk Cache Policy. When this feature is enabled, the physical disk writes data to the physical disk cache before writing it to the physical disk.
Storage.VirtualDisk.LockStatus (Read Only) Description This attribute represents security status of the virtual disk. It is used to secure a virtual disk configurable via Server Configuration Profile (SCP) feature only. Legal Values ● Unlocked ● Locked Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Applicable only if controller encryption is configured Storage.VirtualDisk.
Storage.VirtualDisk.RAIDLevel (Read Only) Description This indicates the type of RAID level on the virtual disk. Configurable via Server Configuration Profile (SCP) feature only. Legal Values ● ● ● ● ● ● ● Default Value None Write Privilege None RAID RAID RAID RAID RAID RAID RAID 0 1 5 6 10 50 60 License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Applicable only if RAIDaction is 'Create' Storage.VirtualDisk.
Storage.VirtualDisk.SpanDepth (Read Only) Description This indicates number of spans in the virtual disk. Configurable via Server Configuration Profile (SCP) feature only. Legal Values None Default Value None Write Privilege None License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise Dependency Applicable only if RAIDaction is 'Create' Storage.VirtualDisk.SpanLength (Read Only) Description This indicates the number of physical disks per span on a virtual disk.
Storage.VirtualDisk.WritePolicy (Read or Write) Description The write policies specify whether the controller sends a write-request completion signal as soon as the data is in the cache or after it has been written to disk. NOTE: Storage.VirtualDisk.WritePolicy attribute is read-only for few PERCs—for example, H330.
9 System Attributes This section provides details about the System attribute groups and objects. Topics: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • System.AcquisitionInfo System.Backplane System.ChassisInfo System.CustomAsset System.DepreciationInfo System.Diagnostics System.ExtWarrantyInfo System.IdleServerDetection System.LCD System.LeaseInfo System.MaintenanceInfo System.OutsourceInfo System.OwnerInfo System.PCIeSlotLFM System.PowerHistorical System.QuickSync System.SCP System.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.AcquisitionInfo.Expensed (Read or Write) Description Determines whether the cost of the system was subtracted from the budget of a particular person or department in the purchasing company. Legal Values ● Yes-0 ● No-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.AcquisitionInfo.
Dependancy None System.AcquisitionInfo.PurchaseDate (Read or Write) Description Date the transaction for acquiring the system was completed. Legal Values ● String of up to 32 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.AcquisitionInfo.Vendor (Read Only) Description Company who sold the system to the purchaser. Legal Values ● String of up to 64 ASCII characters.
System.Backplane This group contains the attributes that provides details about System backplane. System.Backplane.BackplaneBusMode (Read Only) Description Enclosure serial interface type, either SGPIO or I2C Legal Values ● Unknown-0 ● I2C-1 ● SGPIO-2 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.Backplane.
Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ChassisInfo.ChassisModel (Read Only) Description Specifies the chassis model. Legal Values ● String of up to 255 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependency None System.ChassisInfo.ChassisName (Read Only) Description Specifies the chassis name Legal Values ● String of up to 255 ASCII characters.
Default Value Not Available Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ChassisInfo.ConnectionState (Read Only) Description Specifies the chassis connection state. Legal Values ● Unknown—0 ● Disconnected/Offline—1 ● Connected/Ready—2 Default Value Unknown Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ChassisInfo.FirmwareVersion (Read Only) Description Specifies the chassis firmware version.
Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.CustomAsset.Value (Read or Write) Description Custom Asset value Legal Values ● String of up to 255 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.DepreciationInfo This group contains the attributes that provides details about System.DepreciationInfo. System.
System.DepreciationInfo.Method (Read or Write) Description Displays the steps and assumptions used to compute the system's depreciation. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.DepreciationInfo.Percentage (Read or Write) Description Indicates the portion of 100 that an asset is devalued or depreciated.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ExtWarrantyInfo.EndDate (Read or Write) Description Displays the date that extended warranty service ends. Legal Values ● String of up to 32 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ExtWarrantyInfo.Provider (Read or Write) Description Displays the name of the business that is providing warranty service to the system owner.
System.IdleServerDetection.IdleServerScanInterval (Read or Write) Description Scan interval time in hours for which server utilization to be monitored. Legal Values ● Integral values from 1 to 9000 Default Value 240 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None System.IdleServerDetection.
System.LCD NOTE: The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the server. NOTE: You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers. This group contains the attributes that provide details about System.LCD. System.LCD.ChassisIdentifyDuration (Read or Write) Description Enable/Disable chassis Identify.
System.LCD.CurrentDisplay (Read Only) Description The string currently displayed on the LCD Legal Values ● String of up to 256 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.LCD.ErrorDisplayMode (Read or Write) Description LCD error message format selection SEL or simple where simple format include the message ID.
System.LCD.LicenseMsgEnable (Read or Write) Description Enable/disable display of no license available for certain licensable features. Legal Values ● No-License-Msg-0 ● Display-Licens-Msg-1 Default Value 0 Write Privilege Server Configuration License Required iDRAC Basic Dependancy None System.LCD.
System.LCD.QualifierTemp (Read or Write) Description Specifies Ambient Temperature Qualifier Legal Values ● C-0 ● F-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.LCD.QualifierWatt (Read or Write) Description Specifies System Watt Qualifier Legal Values ● Watts-0 ● BTU/hr-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.LCD.
System.LeaseInfo This group contains the attributes that provides details about System.LeaseInfo. System.LeaseInfo.Buyout (Read or Write) Description Indicates the amount of money you would have to pay to own a system you are leasing. Legal Values ● String of up to 32 ASCII characters. Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.LeaseInfo.
System.LeaseInfo.MultiSched (Read or Write) Description Indicates whether the cost of leasing the system is computed by more than one rate schedule. Legal Values ● Yes-0 ● No-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.LeaseInfo.RateFactor (Read or Write) Description Displays the factor used to calculate the lease payment. Legal Values ● String of up to 32 ASCII characters.
System.MaintenanceInfo.Restrictions (Read or Write) Description Any exclusions that apply to the maintenance agreement for the system. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.MaintenanceInfo.StartDate (Read or Write) Description The date that maintenance begins. Legal Values ● String of up to 32 ASCII characters.
System.OutsourceInfo.ServiceFee (Read or Write) Description Amount of money paid for either the service contract or for corrective action on a specific problem component. Legal Values ● String of up to 32 ASCII characters. Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.OutsourceInfo.SignedFor (Read or Write) Description Person who authorized the repair of the component. Legal Values ● String of up to 64 ASCII characters.
Dependancy None System.OwnerInfo.OwnerName (Read or Write) Description The individual or business entity that holds legal title to the system. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.OwnerInfo.Type (Read or Write) Description Whether the system is owned or leased.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.PCIeSlotLFM.CustomLFM (Read or Write) Description Minimum airflow to be delivered the installed PCIe card Legal Values ● Integral values from 0 to 5000 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy CustomLFM is read/write when LFMMode is set to custom System.PCIeSlotLFM.
Dependancy None System.PCIeSlotLFM.SlotState (Read Only) Description PCIe slot physically exists Legal Values ● Not-Defined-0 ● Defined-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.PCIeSlotLFM.TargetLFM (Read Only) Description Minimum airflow provisioned for the installed PCIe card Legal Values ● String of up to 512 ASCII characters.
Legal Values ● Disabled-0 ● Read-only-1 ● Read-write-2 Default Value 2 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy System.QuickSync.Presence has to be Absent or Present System.QuickSync.
Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy System.QuickSync.Presence has to be Absent or Present System.QuickSync.WifiEnable (Read or Write) Description Enables or disables QuickSync WiFi access Legal Values ● Disabled-0 ● Enabled-1 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy System.QuickSync.Presence has to be Absent or Present System.
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerInfo This group contains the attributes that provides details about system server info. System.ServerInfo.NodeID (Read Only) Description Specifies the system node ID. Legal Values ● String of up to 124 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerInfo.
Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerOS This group contains the attributes that provides details about system server OS. System.ServerOS.HostName (Read or Write) Description Server Host Name Legal Values ● String of up to 253 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerOS.
Legal Values ● String of up to 254 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerOS.ProductKey (Read Only) Description Windows OS Product Key associated with the server Legal Values ● String of up to 32 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerOS.
System.ServerPwr.ActivePowerCapVal (Read Only) Description Set the Active Power Cap value Legal Values ● Integral values from 0 to 32767 Default Value 32767 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None System.ServerPwr.
Legal Values ● Integral values from 0 to 32767 Default Value 32767 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None System.ServerPwr.PSPFCEnabled (Read or Write) Description Enable the Power Supply Power Factor Correction Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None System.ServerPwr.
Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Express or iDRAC Enterprise Dependancy None System.ServerPwrMon This group contains the attributes that provide details about system server power monitor. System.ServerPwrMon.AccumulativePower (Read Only) Description Total power in energy consumed by server from start time.
Legal Values ● Integral values from 0 to 2147483647 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerPwrMon.MinPowerTimeStr (Read Only) Description The time when minimum power is recorded. Legal Values ● String of up to 128 ASCII characters. Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerPwrMon.
License Required iDRAC Basic Dependancy None System.ServerPwrMon.PeakPowerStartTime (Read Only) Description Start of time period for which peak power is recorded. Legal Values ● Integral values from 0 to 2147483647 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerPwrMon.PeakPowerStartTimeStr (Read Only) Description The start time when peak power is recorded. Legal Values ● String of up to 128 ASCII characters.
System.ServerPwrMon.PeakPowerWatts (Read Only) Description Maximum power consumed by server from the start time. Legal Values ● Integral values from 0 to 32767 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerPwrMon.PowerConfigReset (Read or Write) Description Resets the power statistics starting time. (Write only).
Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerTopology.DataCenterName (Read or Write) Description The data center the system is located in. Legal Values ● String of up to 128 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServerTopology.RackName (Read or Write) Description Name of the rack on which the system is located. Legal Values ● String of up to 128 ASCII characters.
System.ServerTopology.SizeOfManagedSystemInU (Read Only) Description Measure of thickness of the system in U Legal Values ● Integral values from 1 to 255 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ServiceContract This group contains the attributes that provides details about System.ServiceContract. System.ServiceContract.Renewed (Read or Write) Description Whether the service contract was renewed or not (Yes or No).
System.Storage This group contains the attributes that provides details about system storage. System.Storage.AvailableSpareAlertThreshold (Read or Write) Description Displays the system level user configured threshold value for available spare value of the SSD devices connected to system. Legal Values ● Integral values from 1 to 99 Default Value 10 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.Storage.
System.SupportInfo.HelpDesk (Read or Write) Description Name of the help desk that provides technical support for your system; information provided by the help desk. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.SupportInfo.Outsourced (Read or Write) Description Indicates whether you have contracted with an outside business entity to provide technical support for your system.
License Required iDRAC Basic Dependancy None System.SystemInfo.PrimaryTelephone (Read or Write) Description Telephone number for the person responsible for managing the system. Legal Values ● String of up to 64 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.SystemInfo.PrimaryUser (Read or Write) Description Text that provides the name for the person responsible for managing the system.
System.ThermalConfig This group contains the attributes that provide details about System.ThermalConfig. System.ThermalConfig.ASHRAEEnvironmentalClass (Read Only) Description Defines the supported ASHRAE Environmental Class for the system Legal Values ● ● ● ● Default Value 0 Write Privilege Configure iDRAC N/A-0 A2-1 A3-2 A4-3 License Required iDRAC Basic Dependancy None System.ThermalConfig.
● No-2 Default Value 1 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ThermalConfig.MaxCFM (Read Only) Description Legal Values ● Integral values from 0 to 1000 Default Value 0 Write Privilege Not Applicable License Required iDRAC Basic Dependancy Not shown if system.embedded.1#thermalsettings.1#systemCFMsupport is not supported. System.ThermalConfig.
System.ThermalSettings This group contains the attributes that provide details about system thermal settings. NOTE: You may encounter an error when running an operation with attributes requiring iDRAC Datacenter license, on a system without this required license. System.ThermalSettings.AirExhaustTemp (Read or Write) Description Specifies the Average Air Exhaust Temperature NOTE: This attribute is platform dependent.
Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy Feature must be supported to set the value. System.ThermalSettings.AirTemperatureRiseLimitSupport (Read Only) Description Defines if the Air Temperature Rise Limit configuration is supported Legal Values ● Not Supported-0 ● Supported-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy None System.ThermalSettings.
Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ThermalSettings.FanSpeedLowOffsetVal (Read Only) Description Specifies the Fan Speed Low Offset Value NOTE: This attribute is platform dependent. Legal Values ● Integral values from 0 to 65535 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ThermalSettings.
Legal Values ● ● ● ● ● Default Value 255 Write Privilege Configure iDRAC Low-0 High-1 Medium-2 Max-3 Off-255 License Required iDRAC Basic Dependancy None System.ThermalSettings.MaximumPCIeInletTemperatureLimit (Read or Write) Description Defines the Maximum PCIe Inlet Temperature Limit. Legal Values ● 55-0 ● 45-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy Feature must be supported to set the value. System.ThermalSettings.
System.ThermalSettings.MFSMinimumLimit (Read Only) Description Specifies the MFS Minimum Limit NOTE: This attribute is platform dependent. Legal Values ● Integral values from 0 to 100 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ThermalSettings.MinimumFanSpeed (Read or Write) Description Minimum Fan Speed NOTE: This attribute is platform dependent.
System.ThermalSettings.SetAirTemperatureRiseLimit (Read or Write) Description Defines if the Air Temperature Rise Limit configuration is enabled/disabled. Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Datacenter Dependancy Feature must be supported to set the value. System.ThermalSettings.SetMaximumExhaustTemperatureLimit (Read or Write) Description Defines if the Exhaust Temperature Limit configuration is disabled or enabled.
System.ThermalSettings.SystemInletTemperature (Read Only) Description Indicates the current system inlet (ambient) temperature. Legal Values ● Integral values from 0 to 127 Default Value 0 Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.ThermalSettings.SystemInletTemperatureSupportLimitPer Configuration (Read Only) Description Indicates the system inlet temperature limit supported for system configuration.
Dependancy None System.USBFront This group contains the attributes that provides details about system USB front. System.USBFront.Enable (Read or Write) Description Enables or disables the host front USB port. NOTE: This setting can be overwritten by BIOS Menu setting. Legal Values ● Enabled-2 ● Disabled-1 ● Not Applicable-0 Default Value 0 Write Privilege Server Configuration License Required iDRAC Basic Dependancy System.USBFront.Enable can only be set to Enable/Disable if iDRAC.
System.WarrantyInfo.EndDate (Read or Write) Description The date that extended warranty service ends. Legal Values ● String of up to 32 ASCII characters. Default Value None Write Privilege Configure iDRAC License Required iDRAC Basic Dependancy None System.WarrantyInfo.UnitType (Read or Write) Description Indicates whether the length of the warranty is measured in days or months.