Dell Rugged Barcode Scanner module with USB for Latitude Rugged 7220 User’s Guide
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Introduction .......................................................................................... 4 2 Features ...............................................................................................5 Unique Features....................................................................................... 6 3 Setting up your Barcode Scanner ............................................................ 7 4 Technical Specifications .........................................................
1. Introduction Dell Rugged Barcode Scanner Module with USB for the Dell Rugged Extreme 7220 Tablet provides an enhanced scanning experience along with two extended USB ports. HMX view link https://content.hmxmedia.com/dell-scanner-module-for-rugged-extremetablet/index.
2.
Unique features NOTE: Recommended to have RCC 4.2.1 or later installed on Latitude Rugged 7220.
3. Setting up your Rugged Scanner with USB 1.Turn the tablet over and align the screws to the holes at the back of the tablet. Attach the Rugged Scanner with USB to the tablet, easily, with thumb-screws. (Step 2 & 3 are on the next page.
(Continued from the previous page.) 2.Lift up the screw handles and tighten all four screws. 3.Install Rugged Scanner with USB drivers on your Dell Rugged tablet. www.dell.
4. Technical specifications Dimensions and weight Description Value Height 19.4 mm (0.765”) Width 55 mm (2.14”) Length 201.8 mm (7.946”) Weight 187.5 g (0.
Scanner Requirement Table 1.
Barcode (2D) 1 QR Code 2 Micro QR 3 Datmatrix 4 PDF417 5 Micro PDF417 6 Composite Codes 7 TLC-39 8 Aztec 9 Australian Post Standard Customer Media USB Type A 1. Two USB 3.2 Gen-1 ports 2. Support 2.1 A (min) through the ports 3. Ports will not support USB power share USB Switch Module shall have a switch to enable/disable USB 3.0 communication for GPS interference Scanner Trigger Scanner module shall have two user trigger buttons with either capable of initiating scan.
1. Barcode scan shall have an LED which indicates scanning in progress or to be used for diagnostic purposes 2. Barcode shall have an audible tone to indicate scan captures Environmental 1. Operating temperature: -29C to 60C 2. Non-operating temperature: -40C to 70C 3. Meet MIL-810-H Requirement Regulatory 1. Regulatory Model: T03HBCSU 2. Ratings: 5.5A 6-8.4Vdc 3. Laser Classification: Intended for use in CDRH Class II/IEC 608251 Class 2 devices 4.
5. RCC User Guide for Rugged Scanner with USB Barcode Settings You can use the barcode settings feature to capture and read information that is contained in a barcode. In Rugged Control Center, you can connect an external scanner to your system, or use the camera-based scanner to scan the barcode. Download and install Dell Rugged Scanner with USB module driver Prerequisites • Ensure that your operating system is updated to the latest version.
2. 3. 4. 5. 6. 7. 8. www.dell.com/support. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example: Latitude 7220 Rugged Extreme Tablet. A list of matching products is displayed. Select your product from the list. Click DRIVERS & DOWNLOADS. Download the Dell Barcode Module driver. Double-click the downloaded file to start the installation wizard. Follow the on-screen instructions to complete the installation process.
Serial mode requires a driver that must be installed in your system. Prerequisites Ensure that you restart Rugged Control Center if it is running in your system after connecting the scanner or changing the communication mode. About this task To setup the scanner using serial mode communication, do the following: Steps 1. By default, the scanner is set to the serial mode. If the scanner is not set to the serial mode, scan the barcode after installing the driver.
4. Select one of following scanner modes: • Multi Scan Mode—Scans the barcode continuously one after another. • Single Scan Mode—Scans only one barcode at a time and disconnects. 5. Select one of the following options in the prefix and suffix settings: • None—Displays the scanned data without any settings. • Alphanumeric Character—Specify an alphanumeric character to add with the scanned data. • Recording—Record any key or key combination to add along with the scanned data.
Table 1.
1D Symbologies Code 39 Code 128 Codabar Code 11 UPC/EAN 2 of 5 Databar Code 93 MSI UK Plessy Telepen Standard Full ASCII Code 32 / Italian Pharmacode Trioptic Standard EAN-128 ISBT-128 Standard Ames Code 11 Standard Matrix 2 of 5 UPCA (W/WO supplemental) UPCE (W/WO supplemental) UPCE1 (W/WO supplemental) EAN-8 (W/WO supplemental) EAN-13 (W/WO supplemental) JAN-8 (W/WOsupplemental) JAN-13 (W/WO supplemental) Bookland/ISBN ISSN Coupon Code Interleaved 2 of 5 Discrete 2 of 5 IATA Omnidirectional Limited Ex
PDF Standard Micro PDF French Lottery Posti4S Korean 3 of 5 Standard Macro PDF Standard Macro Micro PDF 1D + 2D Symbologies Composite TLC-39 CC-A CC-B CC-C N/A Matrix Symbologies Aztec Data Matrix QR Maxicode Han Xin Grid Matrix DotCode OCR Symbologies OCR Standard Aztec Rune ECC 000-140 ECC 200 GS1 Data Matrix Standard Micro QR GS1 QR N/A N/A N/A N/A OCRA OCRB (Incl Passport, TravelDoc and Visa) MICR US CurrencySerial Number Watermark Symbologies Digimarc N/A Digimarc N/A Troubleshooting the Barcod
Steps 1. Download and install any external scanner such as 123Scan Utility. 2. Open the scanner and wait for the drivers to update. 3. After the drivers are updated, go to the Data view tab, and select the required scanner. The detailed information about the scanner is displayed. 4. To check if your scanner is working, click the Flash/Beep scanner. You can hear a beep sound from the scanner. 5. Go to Rugged Control Center, and check for the barcode scanner in the Settings section.
6. Contacting Dell About this task If you do not have an active Internet connection, you can find contact information from your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country/region or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Steps 1. Go to www.www.dell.com/support. 2.
