Inspiron 11 3000 Series Service Manual Computer Model: Inspiron 11–3162 Regulatory Model: P24T Regulatory Type: P24T001
Catatan, perhatian, dan peringatan CATATAN: CATATAN menunjukkan informasi penting yang akan membantu Anda menggunakan komputer lebih baik lagi. PERHATIAN: PERHATIAN menunjukkan kemungkinan terjadinya kerusakan pada perangkat keras atau hilangnya data, dan memberitahu Anda mengenai cara menghindari masalah tersebut. PERINGATAN: PERINGATAN menunjukkan potensi kerusakan harta benda, cedera pribadi, atau kematian Copyright © 2016 Dell Inc. Hak cipta dilindungi undang-undang.
Contents Sebelum mengerjakan bagian dalam komputer....................8 Persiapan ........................................................................................................... 8 Safety instructions..............................................................................................8 Alat bantu yang direkomendasikan................................................................... 9 After working inside your computer......................................10 Melepaskan penutup bawah...
Melepaskan modul memori.....................................................26 Prerequisites.....................................................................................................26 Procedure........................................................................................................ 26 Memasang kembali modul memori....................................... 28 Procedure........................................................................................................
Melepaskan baterai sel berbentuk koin................................ 42 Prerequisites.....................................................................................................42 Procedure........................................................................................................ 42 Memasang kembali baterai sel berbentuk koin...................44 Procedure........................................................................................................ 44 Post-requisites.......
Melepaskan board sistem........................................................ 59 Prerequisites.....................................................................................................59 Procedure........................................................................................................ 59 Memasang kembali board sistem...........................................63 Procedure........................................................................................................
Melepaskan panel display........................................................ 75 Prerequisites.....................................................................................................75 Procedure.........................................................................................................75 Memasang kembali panel display...........................................78 Procedure.........................................................................................................
Sebelum mengerjakan bagian dalam komputer CATATAN: The images in this document may differ from your computer depending on the configuration you ordered. Persiapan 1 Simpan dan tutup semua file yang terbuka, lalu keluar dari semua aplikasi yang terbuka. 2 Matikan komputer Anda. – Windows 10: Klik atau ketuk Mulai → Matikan → Daya. – Windows 8.1: Pada layar Mulai, klik atau ketuk ikon daya Matikan. → – Windows 7: Klik atau ketuk Mulai → Matikan .
WARNING: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the computer, replace all covers, panels, and screws before connecting to the electrical outlet. CAUTION: To avoid damaging the computer, ensure that the work surface is flat and clean. CAUTION: To avoid damaging the components and cards, handle them by their edges, and avoid touching pins and contacts.
After working inside your computer CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer. 1 Replace all screws and ensure that no stray screws remain inside your computer. 2 Connect any external devices, peripherals, or cables you removed before working on your computer. 3 Replace any media cards, discs, or any other parts that you removed before working on your computer. 4 Connect your computer and all attached devices to their electrical outlets.
Melepaskan penutup bawah PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Close the display and turn the computer over.
3 Remove the screws that secure the base-cover assembly to the palmrest and keyboard assembly.
4 Pry loose the left side of the base-cover assembly from the palm rest and keyboard assembly.
5 14 Slide the base-cover assembly to the right and release it from the HDMI and USB ports.
6 Carefully turn over the base-cover assembly. 1 7 base-cover assembly 2 palm-rest and keyboard assembly Remove the I/O board.
Memasang kembali penutup bawah PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Replace the I/O board.
Melepaskan baterai PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Follow the procedure from step 1 to step 6 in “Removing the base cover”.
2 3 18 Remove the screws that secure the battery to the palm rest and keyboard assembly. 1 battery cable 2 screws (3) 3 battery 4 palm rest and keyboard assembly Tilt the battery (applicable for configuration with hard drive only) to release the tab on the battery from the hard-drive bracket.
4 5 Lift the battery off the palm rest and keyboard assembly. 1 battery 2 palm rest and keyboard assembly 3 tab 4 hard-drive bracket Follow the step 1 procedure in “Removing the I/O board”.
6 Turn the computer over, open the display, and press the power button for five seconds to ground the system board.
Memasang kembali baterai PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Follow the step 4 procedure in “Replacing the I/O board”.
Melepaskan board I/O PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
4 Slide and lift the I/O board off the base cover.
5 Open the latch and disconnect the I/O-board cable from the I/O board.
Memasang kembali board I/O PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Melepaskan modul memori PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
2 Remove the memory module from the memory-module slot.
Memasang kembali modul memori PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 28 Align the notch on the memory module with the tab on the memorymodule slot.
2 Slide the memory module firmly into the memory-module slot at an angle and press it down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. 1 memory module 2 memory-module slot 3 notch 4 tab Post-requisites 1 Replace the battery. 2 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.
Melepaskan hard disk PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. PERHATIAN: Hard drives are fragile. Exercise care when handling the hard drive.
2 3 Slide and lift the hard-drive assembly off the palm rest and keyboard assembly. 1 screws (3) 3 palm rest and keyboard assembly 2 hard-drive assembly Remove the screws that secure the hard-drive bracket to the hard drive.
4 32 Lift the hard drive from the hard-drive bracket.
Memasang kembali hard disk PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. PERHATIAN: Hard drives are fragile. Exercise care when handling the hard drive.
Melepaskan port adaptor daya PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
3 Lift the power-adapter port with its cable, off the palm rest and keyboard assembly.
Memasang kembali port adaptor daya PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Place the power-adapter port into the slot on the palm rest and keyboard assembly.
Melepaskan kartu nirkabel PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
4 38 Slide the wireless card from the wireless-card slot on the system board.
Memasang kembali kartu nirkabel PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure CAUTION: To avoid damage to the wireless card, do not place any cables under it.
5 Replace the screw that secures the wireless card to the palm rest and keyboard assembly. 1 notch 2 wireless card 3 wireless-card slot 4 antenna cables (2) 5 wireless-card bracket 6 tab 7 screw Post-requisites 1 Replace the battery. 2 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.
3 Follow the step 4 procedure in “Replacing the I/O board”.
Melepaskan baterai sel berbentuk koin PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. PERHATIAN: Removing the coin-cell battery resets the BIOS setup program’s settings to default.
3 Carefully peel off and lift the coin-cell battery from the palm rest and keyboard assembly.
Memasang kembali baterai sel berbentuk koin PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Adhere the coin-cell battery to the palm rest and keyboard assembly.
Melepaskan panel sentuh PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
3 46 Lift the keyboard cable to access the screws that secure the touch pad to the palm rest and keyboard assembly.
4 Remove the screws that secure the touch pad to the palm rest and keyboard assembly.
5 Slide and lift the touch pad from the palm rest and keyboard assembly.
Memasang kembali panel sentuh PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Slide the tabs on the touch pad into the slots on the palm rest and keyboard assembly.
5 Ensure there is a gap between the mylar and the palm rest and keyboard assembly. 1 mylar 2 palm rest and keyboard assembly 6 Adhere the tape to the touch pad. 7 Slide the touch-pad cable into the connector on the touch pad and close the latch to secure the cable. Post-requisites 1 Replace the battery. 2 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.
Removing the speaker WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”. 2 Remove the battery.
3 52 Release the rubber stubs on the speaker and lift the speaker from the palm rest and keyboard assembly.
Replacing the speaker WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Melepaskan unit display PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
3 Open the latch and disconnect the display cable from the system board.
4 Open the palm rest and keyboard assembly at an angle. 1 5 56 palm rest and keyboard assembly Remove the screws that secure the display assembly to the palm rest and keyboard assembly.
6 Slide and lift the palm rest and keyboard assembly off the display assembly. 1 palm rest and keyboard assembly 3 display hinges (2) 2 screws (2) After performing all the steps, we are left with display assembly.
Memasang kembali unit display PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Melepaskan board sistem PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CATATAN: Your computer’s Service Tag is stored in the system board.
4 5 60 Disconnect the coin-cell battery cable from the system board. 1 latch 2 display cable 3 display-cable bracket 4 screw 5 speaker cable 6 coin-cell battery cable Disconnect the power-adapter port cable from the system board.
6 7 Open the latches and disconnect the touch-pad cable and keyboard cable from the system board. 1 power-adapter port cable 2 touch-pad cable 3 latches (2) 4 keyboard cable Remove the screw that secures the system board to the palm rest and keyboard assembly.
8 62 Lift the system board off the palm rest and keyboard assembly.
Memasang kembali board sistem PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CATATAN: Your computer’s Service Tag is stored in the system board.
Post-requisites 1 Replace the hard drive. 2 Replace the wireless card. 3 Replace the memory module. 4 Replace the battery. 5 Follow step 4 in “Replacing the I/O board”. 6 Follow step 2 to step 5 in “Replacing the base cover”.
Melepaskan unit sandaran tangan dan keyboard PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
1 66 palm rest and keyboard assembly
Memasang kembali unit sandaran tangan dan keyboard PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Melepaskan bezel display PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
2 Lift the hinge caps from the display hinges.
3 Using your finger tips gently pry and lift the display bezel off the display back-cover and antenna assembly.
Memasang kembali bezel display PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Melepaskan engsel display PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
2 Lift the display hinges off the display back-cover and antenna assembly.
Memasang kembali engsel display PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Melepaskan panel display PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
2 Carefully turn the display panel over. 1 screws (4) 3 display back-cover and antenna assembly 2 display panel 3 Peel off the adhesive tape from the display cable. 4 Open the latch and disconnect the display cable.
5 Lift the display panel off the display back-cover and antenna assembly.
Memasang kembali panel display PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Melepaskan kamera PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Follow the procedure from step 1 to step 6 in “Removing the base cover”. 2 Remove the battery.
2 80 Disconnect the camera cable from the camera.
3 Peel the display cable from the display back-cover and antenna assembly.
Memasang kembali kamera PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Adhere the display cable to the display back-cover and antenna assembly.
Melepaskan unit penutupbelakang display dan antena PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
1 84 display back-cover and antenna assembly
Memasang kembali unit penutup-belakang display dan antena PERINGATAN: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Flashing the BIOS You may need to flash (update) the BIOS when an update is available or when you replace the system board. To flash the BIOS: 1 Turn on the computer. 2 Go to www.dell.com/support. 3 Click or tap Product Support, enter the Service Tag of your computer and click Submit. NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model. 4 Click or tap Drivers & downloads. 5 Select the operating system installed on your computer.
Mendapatkan bantuan dan menghubungi Dell Sumber daya bantuan mandiri Anda bisa mendapatkan informasi dan bantuan tentang produk dan layanan Dell dengan menggunakan sumber daya bantuan mandiri ini: Informasi tentang produk dan layanan Dell. www.dell.com Windows 8.1 dan Windows 10 aplikasi Dell Help & Support (Bantuan & Dukungan Dell) Windows 10 Aplikasi Get started (Cara memulai) Windows 8.1 Aplikasi Bantuan + Tips Mengakses bantuan dalam Windows 8, Windows 8.
Pelajari tentang sistem operasi Anda, pengaturan dan cara penggunaan komputer Anda, pencadangan data, diagnostik, dan lain sebagainya. Lihat Saya dan Dell Saya di www.dell.com/support/manuals. Menghubungi Dell Untuk menghubungi Dell mengenai penjualan, dukungan teknis, atau masalah layanan pelanggan, lihat www.dell.com/contactdell. CATATAN: Ketersediaan bervariasi tergantung negara dan produk, dan beberapa layanan mungkin tidak tersedia di negara Anda.