Dell OEM Client Identity Module Installation Guide This document provides instructions to install an Identity Module on a Dell client system.
Revisions Date Description June 2018 Initial release The information in this publication is provided “as is.” Dell Inc. makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose. Use, copying, and distribution of any software described in this publication requires an applicable software license. Copyright © 2018 Dell Inc. or its subsidiaries.
Table of contents Revisions.............................................................................................................................................................................2 3 1 Introduction ...................................................................................................................................................................4 2 Obtaining the Identity Module............................................................................................
1 Introduction The Dell EMC OEM Identity Module enables OEMs to rebrand and customize their products. The Identity module centralizes the control points of multiple features, enabling OEM customers to save time and resources when deploying their systems. This document describes the process of installing an OEM Identity Module on a Dell Client system. Note: To install an Identity Module outside of Dell manufacturing facilities, use the Board Service Utility (BSU) version of the installation file.
3 Obtaining the Client ID Installation Utility To install the IDM, you need the Client ID Installation Utility. This utility may also be referred to as the Client ID Injection Tool or the PMI Tool. You can obtain the Client ID Installation Utility from your Dell EMC account team. Notes: The Client ID Installation Utility is available in 32-bit and 64-bit versions. Use the utility corresponding to the version of Windows OS on your test platform.
5 Verifying installation of IDM After the IDM is installed, you can verify the installation by checking for the following: Custom splash screen image. Note: The custom splash logo may be displayed for a very short period of time. You may need to cold boot your system or take your monitor out of sleep mode to see the splash logo. System Setup (F2 at POST): Manufacturer and Model Name displayed in the upper left-hand corner of System Setup.
Contact Information For questions related to this document, contact the account manager responsible for the customer engagement.
