Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User's Guide About Your Monitor Setting Up the Monitor Operating the Monitor Troubleshooting Appendix Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Back to Contents Page About Your Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability LCD Monitor Quality & Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell™ if anything is missing. NOTE: Some items may be optional and may not ship with your monitor.
l VGA Cable (attached to the monitor) l Drivers and Documentation media Quick Setup Guide Safety Information l l Product Features The Dell™ E2010H/E2210H/E2310H flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ E2010H: 20 inch (508.0 mm) viewable area display. 1600x900 resolution, plus full-screen support for lower resolutions. ■ E2210H: 21.5 inch (546.0 mm) viewable area display.
1. Shortcut Key 1 2. Shortcut Key 2 3. OSD Menu 4. Exit 5. Power On/Off Back View Label Description Use 1 Regulatory rating label List the regulatory approvals. 2 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 3 VESA mounting holes (100 mm) To mount the monitor. 4 Security lock slot Use a security lock with the slot to help secure your monitor. 5 Dell soundbar mounting brackets To attach the optional Dell Soundbar.
Left Side Right Side Bottom View Label Description Use 1 AC power connector To connect the monitor power cable. 2 VGA connector To connect your computer to the monitor using a VGA cable. 3 DVI connector To connect your computer to the monitor using a DVI cable 4 Stand lock Disable stand release button and lock stand assembly with fastening a M3 machine screw.
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation Active Active Active Blue 29 W Active-off mode Inactive Inactive Blank Amber Less than 1 W Switch off - - - Off Less than 1 W The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be displayed: Activate the computer and monitor to gain access to the OSD.
1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.3V power 15 Self test 16 Hot Plug Detect 17 TMDS RX0- 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- Plug and Play Capability You can install the monitor in any Plug and Play-compatible system.
Resolution Specifications Dell E2010H/E2210H/E2310H Flat Panel Monitor Model number Scan range l Horizontal 30 kHz to 83 kHz (automatic) l Vertical 50 Hz to 75 Hz (automatic) 1600 x 900 at 60 Hz (For E2010H) Maximum preset resolution 1920 x 1080 at 60 Hz (For E2210H/E2310H) Electrical Specifications Model number Dell E2010H/E2210H/E2310H Flat Panel Monitor Video input signals Analog RGB: 0.
l Depth 151.9 mm (5.98 inches) 158.9 mm (6.26 inches) 164.0 mm (6.46 inches) Dimensions: (without stand) l Height 287.6 mm (11.32 inches) 306.5 mm (12.07 inches) 325.7 mm (12.82 inches) l Width 481.2 mm (18.94 inches) 515.0 mm (20.28 inches) 548.8 mm (21.61 inches) l Depth 60.0 mm (2.36 inches) 64.5 mm (2.54 inches) 63.5 mm (2.50 inches) Stand dimensions: l Height 289.3 mm (11.39 inches) 298.3 mm (11.74 inches) 310.8 mm (12.24 inches) l Width 250.9 mm (9.88 inches) 258.9 mm (10.
Maintenance Guidelines Caring for Your Monitor CAUTION: Read and follow the safety instructions before cleaning the monitor. CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: l l l l l To clean your antistatic screen, slightly dampen a soft, clean cloth with water.
Back to Contents Page Appendix Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC Notices (U.S.
Back to Contents Page Setting Up Your Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1600 x 900 (for E2010H) or 1920x1080 (for E2210H/E2310H) again.
Back to Contents Page Setting Up Your Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor If you have a non Dell™ desktop, portable computer, or graphics card 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).
Back to Contents Page Operating the Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt Power On the Monitor Press the button to turn on the monitor. Using the Front Panel Controls Use the keys on the front of the monitor to adjust the image settings.
Using the On-Screen Display (OSD) Menu Accessing the Menu Syste 1. Press the button to open the OSD menu and display the main menu. Main Menu 2. Press the 3. To select the highlighted item on the menu press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 4. Press the button to enter the slide bar and then use the 5. Select the to exit from the on-screen Display menu or select button again.
Auto Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self Adjust Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor b (Coarse) and Phase (Fine) controls under Image Settings. NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
l Standard: Loads the monitor's default color settings. This is the default preset mode. l Multimedia: Loads color settings ideal for multimedia applications. l Game: Loads color settings ideal for most gaming applications. l Warm: Increase the color temperature. The screen appears warmer with a red/yellow tint. l Cool: Decreases the color temperature. The screen appears cooler with a blue tint. l Custom (RGB): Allows you to manually adjust the color settings.
Back Press to go back to the main menu. Horizontal Position Use the or buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+). Vertical Position Use the or buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+) Sharpness This feature can make the image look sharper or softer. Use Pisel Clock The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Menu Timer Allows you to set the time for which the OSD remains active after you press a key on the monitor. Use the Menu Lock and keys to adjust the slider in 1 second increments, from 5 to 60 seconds. Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. NOTE: When the OSD is locked, press the first OSD control above the Power On/Off control for 15 seconds to unlock it.
Back Press to go back to the main menu. OSD Warning Messages When the monitor does not support a particular resolution mode you will see the following message: E2010H: E2210H/E2310H: This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1600 x 900 (for E2010H) or 1920 x 1080 (for E2210H/E2310H).
Activate the computer and wake up the monitor to gain access to the OSD If you press any button other than the power button the following messages will appear depending on the selected input: If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears. or See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: 1. 2. 3. 4.
Tilt With the built-in pedestal, you can tilt the monitor for the most comfortable viewing angle. NOTE: The stand is detached when the monitor is shipped from the factory.
Back to Contents Page Setting Up Your Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor Setting the display resolution to1600 x 900 (for E2010H) or 1920 x 1080 (for E2210H/E2310H) (Maximum) For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1600 x900 (for E2010H) or 1920 x 1080 (for E2210H/E2310H)pixels by performing the following steps: 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3.
Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User Guide Setting the display resolution to 1600 x 900 (for E2010H) or 1920 x 1080(for E2210H/E2310H) (Maximum) Information in this document is subject to change without notice. © 2009 Dell Inc. All rights reserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User's Guide Attaching the Stand Connecting Your Monitor Attaching the Dell Soundbar (Optional) Removing the Stand Base Wall mounting (Optional) Attaching the Stand NOTE: The stand is detached when the monitor is shipped from the factory. Remove the monitor cover and place the monitor on it. 1. Fit two tabs on the upper part of the stand to the groove on the back of the monitor. 2.
CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary. Attaching the Dell Soundbar(Optional) NOTICE: Do not use with any device other than the Dell Soundbar. To attach the Soundbar: 1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3.
Wall Mounting (Optional) (Screw dimension: M4 x 10mm). Refer to the instructions that come with the VESA compatible base mounting kit. 1. 2. 3. 4. 5. Place the monitor panel on soft cloth or cushion on stable flat table. Remove the stand Use a screwdriver to remove the four screws securing the plastic cover. Attach the mounting bracket from the wall mounting kit to the LCD. Mount the LCD on the wall by following the instructions that come with the base mounting kit.
Back to Contents Page Troubleshooting Dell™ E2010H/E2210H/E2310H Flat Panel Monitor Self-Test Common Problems Product Specific Problems CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1.
A. B. C. D. E. F. G. Ensure that the screen is clean (no dust particles on the surface of the screen). Unplug the video cable from the back of the computer or monitor. The monitor then goes into the self-test mode. Press and hold the 1st and 4th buttons on the front panel, simultaneously for 2 seconds. A gray screen appears. Carefully inspect the screen for abnormalities. Press the 4th button on the front panel again. The color of the screen changes to red. Inspect the display for any abnormalities.
l l Image retention from a static Faint shadow from the static image left on the monitor for a image displayed appears on long period of time the screen Settings OSD if the Color Management is turned off. Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD. Run the built-in diagnostics. l Use the Power Management feature to turn off the monitor at all times when not in use (for more information, see Power Management Modes). Alternatively, use a dynamically changing screensaver.