Dell EMC XC740xd XC Series Appliance and XC Core System Support Matrix July 2020 Dell EMC Support Matrix
Revisions Date Description July 2020 Updated the following sections: • • June 2020 Updated the following sections: • • May 2020 Supported components Memory capability Supported components Supported NDCs Updated the following sections: • • • • Supported components Supported NDCs Supported NICs Supported hypervisor OSS March 2020 Updated the Supported management software section February 2020 Updated the Supported hypervisor OS section January 2020 Updated Supported NIC section October 2019
February 2019 Updated the following sections: • • • Supported NDCs Supported NICs Supported Management Software Added Encryption Restrictions section December 2018 Updated the following sections: • • • • Supported components BIOS and iDRAC versions Supported networking Supported hypervisor OS October 2018 Added GPU platform support. August 2018 Updated content to include XC Core System. March 2018 Updated BIOS and firmware versions. February 2018 Changed BIOS and firmware versions.
Table of contents Revisions............................................................................................................................................................................. 2 Table of contents ................................................................................................................................................................ 4 Introduction ...................................................................................................................
Introduction The information in this document applies to both, Dell EMC XC Series Appliances as well as the Dell EMC XC Core System offering. Sections or information that apply to only one of the offerings (XC Series or XC Core) will be called out explicitly. This document provides information about the supported software, firmware, and hardware versions and technical specifications for the Dell EMC XC740xd Series Hyper-Converged Appliance.
1 Supported hardware, firmware and software This chapter provides information about supported software, firmware, and hardware versions for the Dell EMC XC740xd Series Hyper-Converged Appliance. NOTE: Future updates to this document may remove firmware versions because Nutanix LCM is the prescribed method to update the appliance. 1.1 Supported components This section provides information about components supported by your hardware.
Cascade Lake Refresh Component Skylake Model Cascade Lake Model 6142M 8260 6144 8268 6146 8270 6148 8276 6150 8280 *L CPUs offered on Core only 6152 6154 8153 8156 8158 8160 8160M 8164 8168 8170 8170M 8176 8180 8180M BIOS 1.2.11 and later 2.2.11 and later iDRAC support 3.15.15.15 or later 3.34.34.
Support Shelf Platinum-82xx Gold-62xx Gold-52xx Silver-42xx 1.2 2933 MT/s Support Supported physical disk drives This section provides information about disks drives supported by your hardware. Supported Physical Disk Drives 1.2.1 Form Factor Capacity Type Vendor Chassis 2.5" 1.2 TB SAS HDD Dell EMC Supported –24 2.5" 1.8 TB SAS HDD Dell EMC Supported –24 2.5" 2.4 TB SAS HDD Dell EMC Supported –24 2.5" 480 GB SATA SSD Dell EMC Supported –24, –12 2.
• • • • If encryption has never been enabled and you do not plan to use it in the future, secure encrypted drives (SED) can be mixed with unencrypted (non-SED) drives in the same node. If encryption was never enabled and remains disabled, encrypted nodes can be mixed with unencrypted nodes in the same cluster. Encryption is not supported for NVMe drives. All nodes in the cluster must have SED capable drives to use hardware SED encryption.
1.3.2 Supported NICs Additional NICs GPU model Intel i350 DP 1Gb NIC Intel i350 QP 1Gb NIC Intel X540 QP 10Gb Base-T NIC Intel X710 DP 10Gb SFP+ PCIe NIC Intel X710 DP 10Gb Base-T PCIe NIC Mellanox 25Gb CX4 SFP28 DP NIC 1.4 GPU platform support This section provides information about GPU platform support.
1.5 Supported management software This section provides information about components supported by your hardware. Supported management software 1.6 Name AOS version (Skylake) AOS version (Cascade Lake) AHV 5.1 or later 5.10.3.2 or later Windows Server 2016 5.5.0.4 or later 5.10.3.2 or later ESXi 6.0U3 5.1 or later 5.10.3.2 or later ESXi 6.5d 5.1 or later 5.10.3.2 or later ESXi 6.7 5.9 – STS or later/ 5.5.7- LTS or later 5.10.3.2 or later ESXi 6.7 U1, ESXi 6.7 U2, ESXi 6.7 U3 5.5.
2 Documentation matrix The documentation matrix provides information about the documents that you use to configure and deploy the Dell EMC Series hyper-converged appliance solution. WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be included with this document or as a separate document.
2.2 To learn about... Refer to...
To learn about... Acropolis base document name Distributed VM management services for Nutanix nodes with Acropolis hypervisor (AHV). Acropolis App Mobility Fabric Guide Nutanix support of containers through Acropolis Container Services. Acropolis Container Services Guide Set up instructions for your solution. Field Installation Guide Software instructions for hardware components that are not functioning.
3 Contacting Dell EMC Dell EMC provides several online and telephone-based support and service options. If you do not have an active internet connection, you can find contact information about your purchase invoice, packing slip, bill, or Dell EMC product catalog. Availability varies by country and product, and some services may not be available in your area. To contact Dell EMC for sales, technical assistance, or customer-service issues: 1. Go to Dell.com/support. 2.