Setup Guide

Dell EMC XC640 Hyper-Converged
Appliance
Getting Started Guide
入门指南
Scan to see how-to videos, documentation,
and troubleshooting information.
扫描以查看入门视频、文档和故障排除信息。
Quick Resource Locator
Dell.com/QRL/XCSeries/XC640
WARNING: Before setting up your appliance, follow the
safety instructions included in the Safety, Environmental,
and Regulatory Information document shipped with the
appliance.
CAUTION: Use Extended Power Performance (EPP)
compliant power supply units (PSUs), indicated by the EPP
label, on your appliance. For more information about EPP,
see the Owner’s Manual at Dell.com/XCSeriesmanuals.
NOTE: The documentation set for your appliance is available at
Dell.com/XCSeriesmanuals. Ensure that you always check this
documentation set for all the latest updates.
NOTE: Ensure that the operating system is installed before
installing hardware or software not purchased with the appliance.
For more information about supported operating systems, see
Dell.com/ossupport.
NOTE: The PSU input connectors may vary depending on the
PSU type.
警告：设备设置前，请遵循设备随附的安全、环境和法规信息
说明文件中的安全说明。
小心：在设备上使用符合扩展电源性能 (EPP) 标准的电源装置
(PSU)（带有 EPP 标签指示）。有关 EPP 的详细信息，请参阅
Dell.com/XCSeriesmanuals 上的用户手册。
注：适用于您的设备的说明文件集可从 Dell.com/XCSeriesmanuals
上获取。确保始终针对所有最新更新确认此文档集。
注：确保在安装未随设备一起购买的硬件或软件之前安装操作系
统。有关支持的操作系统的详细信息，请访问
Dell.com/ossupport。
注：PSU 输入连接器可能因 PSU 类型而异。
Before you begin
开始之前
Loop and secure the power cable using the retention strap
将电源电缆缠绕并用固定束带在固定
3
Turn on the appliance
开启设备
4
Setting up your appliance
设置设备
Connect the network cable and optional I/O devices
连接网络电缆和可选的 I/O 设备
1
Connect the appliance to the power source
将设备连接到电源
2
NOTE: Ensure that the appliance is installed and secured. For more information about installing and securing the appliance into a rack, see the
rack documentation included with your rack solution.
注：请确保设备已安装并固定。有关将设备安装并固定到机架中的详细信息，请参阅机架解决方案随附的机架说明文件。