Dell Embedded Box PC 5000 Installation and Operation Manual Regulatory Model: N01PC Regulatory Type: N01PC001
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2016-2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview..................................................................................................................................... 5 2 Features......................................................................................................................................6 Top view.................................................................................................................................................................................
10 BIOS defaults........................................................................................................................... 44 11 Contacting Dell..........................................................................................................................
1 Overview The Embedded Box PC 5000 enables you to connect your devices (wired or wireless) to network-enabled devices and manage them remotely in your existing network ecosystem. It enables you to connect with devices used in process and discrete manufacturing, fleet management, kiosks, digital signage, surveillance, and automated retail solutions. It can be either mounted on the wall using the Dell approved wall mount kits or placed on a flat surface.
2 Features Top view Features 1 PCI or PCIe(x8) slot one Install a PCI card or a PCIe(x8) card. Maximum card size supported: Height 111.15 mm (4.38 inches), length 167.65 mm (6.6 inches) 2 PCI or PCIe(x8) or PCIe(x16) slot two Install a PCI card or a PCIe(x8) card, or PCIe(x16) card. Maximum card size supported: Height 111.15 mm (4.38 inches), length 167.65 mm (6.6 inches) 3 Power switch Turn on or off the Embedded Box PC.
Features 13 VGA port Connect a monitor or another VGA enabled device. Provides video output. For more information, see VGA connector mapping. 14 12-26V DC power port (barrel connector) Connect a 12-26V DC power cable for supplying power to your Embedded Box PC. For more information, see 12-26V DC power port (barrel connector). 15 Audio ports (3) Connect a speaker, a headphone, a microphone, or a headset (headphone and microphone combo). NOTE: Connect the headset to the Line Out port.
Pin Signal Pin Signal Pin Signal 1 RED 6 GND 11 NC 2 GREEN 7 GND 12 DDCDAT 3 BLUE 8 GND 13 HSYNC 4 NC 9 +5V 14 VSYNS 5 GND 10 GND 15 DDCCLK Manufacturer part number FoxConn DZ11627-H530P-4F http://www.foxconn.com/ NOTE: This part number is for reference only and is subjected to change. 12-26V DC power port (barrel connector) Pin Polarity 1 Ground 2 DC-IN Manufacturer part number ACES 59130-0023C-P01 https://acesna.
Bottom view Features 1 GPIO-in 8-pin port 1, 2, 4 Connect to a GPIO-out enabled device or dongle. For more information, see GPIO-in connector mapping. 2 GPIO-out 8-pin port 2, 3, 4 Connect to a GPIO-in enabled device or dongle. For more information, see GPIO-out connector mapping. 3 USB 2.0 ports (4) Connect USB enabled devices. Provides data transfer speeds up to 480 Mbps. 4 Network status light one Indicates the network activity of network port one.
GPIO-in connector mapping Pin Signal Pin Signal 1 GPI0 6 GPI5 2 GPI1 7 GPI6 3 GPI2 8 GPI7 4 GPI3 9 GND 5 GPI4 Manufacturer part number ACES 59128-0093C-P01 https://acesna.com/ NOTE: This part number is for reference only and is subjected to change. GPIO-out connector mapping Pin Signal Pin Signal 1 GPO0 6 GPO5 2 GPO1 7 GPO6 3 GPO2 8 GPO7 4 GPO3 9 GND 5 GPO4 Manufacturer part number ACES 59128-0093C-P01 https://acesna.
RS232 connector mapping Pin Signal Pin Signal 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND Manufacturer part number ACES 59131-0093C-P01 https://acesna.com/ NOTE: This part number is for reference only and is subjected to change. RS422 connector mapping Pin Signal Pin Signal 1 TX- 6 NC 2 TX+ 7 NC 3 RX+ 8 NC 4 RX- 9 NC 5 GND Manufacturer part number ACES 59131-0093C-P01 https://acesna.
RS485 connector mapping Pin Signal Pin Signal 1 DATA- 6 NC 2 DATA+ 7 NC 3 NC 8 NC 4 NC 9 NC 5 GND Manufacturer part number ACES 59131-0093C-P01 https://acesna.com/ NOTE: This part number is for reference only and is subjected to change.
3 Setting up the Embedded Box PC WARNING: During the installation of the Embedded Box PC, the responsible party or integrator must use the power adapter provided with the Embedded Box PC, or connect to a 12-26 VDC separate power source already present as part of the clients installation. Always ensure that the available power source matches the required input power of the Embedded Box PC. Check the input power markings next to power connector(s) before making connections.
Components Frequency (MHz) Antenna Type Brand Gain (dBi) Main Aux 5180~5240 4.0 4.0 5260~5320 4.0 4.0 5500~5700 4.0 4.0 5745~5825 3.9 3.9 Bluetooth 2402~2480 2.9 2.9 WLAN 2412~2462 2.82 2.79 4.11 4.51 5260~5320 4.11 4.51 5500~5700 4.11 4.51 5745~5825 4.11 4.51 2402~2480 2.82 2.79 Monopole 5180~5240 Bluetooth Taoglas Antenna Solution Ltd. Installation procedure Please refer to user’s manual for the detail.
• Connect the network cable. • Install the wireless antenna (WLAN 1 and WLAN 2) to enable the wireless connection. • Install the mobile broadband antenna (WWAN 1 and WWAN 2) to enable the mobile broadband connection. NOTE: For more information about connecting the wireless antenna to Dell Embedded Box PC, see the documentation that is shipped with the wireless antenna. NOTE: For more information about installing the WWAN card in the Embedded Box PC, see the Embedded Box PC Service Manual at www.dell.
• Connect the power terminal block to the adapter port and torque the screws at 5.07 kilograms-centimeter (4.4 pounds-inch) to secure it to the Embedded Box PC. 5. Turn on the Embedded Box PC, and complete the operating system setup. NOTE: After the Embedded Box PC setup is complete, reinstall the dust covers on any unused ports. Topics: • Mounting the Embedded Box PC on the wall Mounting the Embedded Box PC on the wall Mount the Embedded Box PC on a wall by using the mounting brackets.
2. Drill four holes in the wall that correspond to the holes on the mounting bracket. 3. Place the Embedded Box PC against the wall and align the holes on the mounting brackets with the holes on the wall. 4. Secure the Embedded Box PC to the wall. NOTE: Torque the screws (M4x6) at 5 to 5.4 kilograms-centimeter (4.3 to 4.7 pounds-inch).
Setting up the Embedded Box PC
4 Setting up your operating system WARNING: To prevent operating system corruption from sudden power loss, use the operating system to gracefully shut down the Embedded Box PC.
The Embedded Box PC restarts to boot Ubuntu Desktop successfully. Restoring Ubuntu Desktop You can restore Ubuntu Desktop on the Embedded Box PC to a new condition if you encounter any of the following situations: • • You are unable to start Ubuntu Desktop The Ubuntu Desktop operating system is damaged Before restoring, create a recovery USB flash drive with the backup image. Restoring Ubuntu Desktop on the Embedded Box PC from the recovery USB flash drive 1.
NOTE: For more information about using the CCM, see the CCM documentation available at www.cloudclientmanager.com. NOTE: For more information about using the DCM, see the DCM documentation available at www.dell.com/ clientsystemsmanagement. NOTE: Dell recommends that you create a recovery USB flash drive before installing Ubuntu Desktop for the first time. Follow these steps to reinstall Ubuntu Desktop: 1. Insert the bootable Ubuntu Desktop USB flash drive. 2. Turn on the Embedded Box PC. 3.
Windows 7 Professional SP1 basic functions BIOS update BIOS updates for the Embedded Box PC may be downloaded from dell.com/support. The download includes an executable that may be ran from the local machine. Watchdog Timer The Watchdog Timer for Windows 7 Professional SP1 is controlled through a BIOS setting. Enter the BIOS during boot by pressing F2. Select System Configuration > Watchdog Timer Support > Enable Watchdog Timer in the BIOS setup program.
Common port mappings on Embedded Box PC 5000 with Windows 7 Professional SP1 Serial port mapping The following table shows the serial port mapping at the bottom of the Embedded Box PC 5000 with the Dell factory installed Windows 7 Professional SP1 OS image. Table 1.
Windows 7 Professional for Embedded Systems SP1 Overview The Embedded Box PC is shipped with Windows 7 Professional for Embedded Systems. For more information, see https:// docs.microsoft.com/en-us/windows/iot-core/. Boot up and log in Before configuring the Windows 7 Professional for Embedded Systems, connect a keyboard, mouse, and monitor to the Embedded Box PC. Turn on the Embedded Box PC to boot into Windows. 1. Select regional settings. 2. Create a user account. 3.
2. Click Change Bluetooth settings from the search result. The Bluetooth Settings dialog box appears. DW5580 network configuration Follow the Service Manual to install and configure the DW5580 module and the corresponding carrier SIM card for the system. Once the module and the SIM card are installed, follow these steps to connect and disconnect from WWAN. 1. Click Start and type Network in the search box. 2. Click Network and Sharing Center from the search result.
6 to 43 (GP66) 7 to 42 (GP67) 8 is GND Embedded Box PC 5000 IO Module PCIe expansion mapping The PCIe slots on the expansion module on the top side of the Embedded Box PC are driven directly from the host PCIe bus. Since it is generic PCIe expansion, there are no PCIe device-specific drivers integrated into the Windows 7 Professional for Embedded Systems OS image.
Configuring LAN/WLAN network 1. Click the Start icon then search for Network. 2. Open Network and Sharing Center. 3. Click Change adapter settings on the left panel. to configure the LAN on the Embedded Box PC. Configuring Bluetooth 1. Click the Start icon then search for Bluetooth. 2. Click Change Bluetooth settings. Configuring WWAN (DW5580) network NOTE: For instruction on installing the WWAN card and SIM card, see the Service manual for your system at www.dell.com/support.
2 to 48 (GP62) 3 to 47 (GP63) 4 to 45 (GP64) 5 to 44 (GP65) 6 to 43 (GP66) 7 to 42 (GP67) 8 is GND Embedded Box PC 5000 IO Module PCIe expansion mapping The PCIe slots on the Embedded Box PC are driven directly from the host PCIe bus. Since it is a generic PCIe expansion, there are no PCIe device-specific drivers integrated into the Windows Embedded Standard 7 P/E OS image.
Watchdog timer The watchdog timer for Windows 10 Pro is enabled and disabled through the BIOS. Enter the BIOS during boot by pressing F2. Select System Configuration > Watchdog Timer Support > Enable Watchdog Timer in the BIOS setup program. The Watchdog Timer feature is used to recover the operating system during the following instances: • • During POST of the computer to ensure that the computer initialization is completed properly by the BIOS/UEFI.
2 to 123 (GP02) 3 to 2 (GP03) 4 to 3 (GP04) 5 to 4 (GP05) 6 to 5 (GP06) 7 to 6 (GP07) 8 is GND GPIO 8 In pin# to NCT6793D pin# map: 0 to 50 (GP60) 1 to 49 (GP61) 2 to 48 (GP62) 3 to 47 (GP63) 4 to 45 (GP64) 5 to 44 (GP65) 6 to 43 (GP66) 7 to 42 (GP67) 8 is GND Embedded Box PC 5000 IO Module PCIe expansion mapping The PCIe slots on the Embedded Box PC are driven directly from the host PCIe bus.
4. Select Troubleshoot. 5. Select Factory Image Restore. 6. Select Next. Wait until the default factory image is installed on the system. 7. Select Finish. Windows 10 IoT Enterprise LTSB 2015 basic functions BIOS update Download the latest BIOS version from www.dell.com/support. Run the executable in the download package from the local machine. Watchdog timer The watchdog timer for Windows 10 IoT Enterprise LTSB 2015 is enabled and disabled through the BIOS. Enter the BIOS during boot by pressing F2.
Serial port number Port type Connector Device Node 2 RS232/422/485 DB9 COM2 3 RS232/422/485 DB9 COM3 4 RS232/422/485 DB9 COM4 Embedded Box PC 5000 GPIO In/Out mapping The GPIOs ports on the Embedded Box PC and Nuvoton NCT6793D uses index/data pair of processor I/O Addresses 2Eh/2Fh to access NCT6793D.
9. USB 3.0 10. ZigBee 11. CANbus Intel Mobile Chipset Software Installation Utility 1. Go to www.dell.com/support. 2. Click Product support, enter the Service Tag of the Embedded Box PC, and then click Submit. NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for the Embedded Box PC model. 3. Click Drivers & downloads > Find it myself. 4. Scroll down the page and expand Chipset. 5. Click Download to download the Intel Mobile Chipset Software Installation Utility. 6.
6. After the download is complete, navigate to the folder where you saved the driver files. 7. Double-click the driver file icons and follow the instructions on the screen. Audio 1. Go to www.dell.com/support. 2. Click Product support, enter the Service Tag of the Embedded Box PC, and then click Submit. NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for the Embedded Box PC model. 3. Click Drivers & downloads > Find it myself. 4.
3. 4. 5. 6. 7. NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for the Embedded Box PC model. Click Drivers & downloads > Find it myself. Scroll down the page and expand Network. Click Download to download the ZigBee 3.0 driver. After the download is complete, navigate to the folder where you saved the ZigBee 3.0 driver file. Double-click the ZigBee 3.0 driver file icon and follow the instructions on the screen. CANbus 1. Go to www.dell.com/support. 2.
5 Specifications Dimension and weight Width 246 mm (9.69 in) Depth 270 mm (10.63 in) Height 107.20 mm (4.22 in) Weight 5.80 kg (12.80 lb) System information Model number Dell Embedded Box PC 5000 Processor • • • • Intel Celeron G3900E Intel Core i3-6100E Intel Core i5-6440EQ Intel Core i7-6820EQ NOTE: Depending on workload, Intel 4th generation Core i7 configurations could throttle in operating environments above 35°C (95°F).
Ports and connectors • • • • Two DisplayPort One line-in port One line-out port One microphone port NOTE: For more information about the display options, see Display Options. Network • • • Two RJ45 ports Two wireless ports Two mobile broadband antenna ports I/O port • • • One CANbus port (optional) Four RS232/RS422/RS485 ports GPIO 16-bit USB • • Four USB 3.0 ports Four USB 2.0 ports Communications WiFi Dual-band 802.11b/g/n/ac Bluetooth Bluetooth 4.
Environmental requirements 38 Operating –15.20 m to 5000 m (–50 ft to 16,404 ft) Storage –15.
6 Activating your mobile broadband service NOTE: For more information about installing the SIM card, see the Embedded Box PC Service Manual at www.dell.com/ support. 1. Turn on the Embedded Box PC. 2. Follow these steps to connect to the mobile broadband network: NOTE: To activate your mobile broadband service, contact your service provider with the following information: Windows OS a. From the task bar select the Network icon and then select Cellular. The Cellular page is displayed. b.
7 Setting up the ZigBee dongle 1. Shut down the Embedded Box PC. 2. Connect the ZigBee dongle to any external USB port on the Embedded Box PC. 3. Turn on the Embedded Box PC and complete the setup. NOTE: For ZigBee development information, see the SiLabs developer website at www.silabs.com or contact the network system’s application provider.
8 Display options Embedded Box PC consists of the following video connectors: • • • • VGA HDMI DisplayPort 1 (DP1) DisplayPort 2 (DP2) The Embedded Box PC supports up to three simultaneous connections. The enabled ports are: • • HDMI, DP1, and VGA (default) HDMI, DP1, and DP2 Video output is always supported on HDMI and DP1 connectors. You can switch the display output between the VGA port and the DP2 port in the BIOS.
9 Connector kits Remote power connector Use the remote power connector to install the remote power switch. 12-26V DC power connector Use a 12-26V DC power connector to supply power to your Embedded Box PC. GPIO-in connector Use the GPIO-in connector to connect the GPIO-out enabled devices or dongles.
GPIO-out connector Use the GPIO-out connector to connect the GPIO-in enabled devices or dongles.
10 BIOS defaults General Item Default value System Information BIOS Version Not applicable Service Tag Not applicable Asset Tag Not applicable Ownership Tag Not applicable Manufacturing Date Not applicable Ownership Date Not applicable Express Service Code Not applicable Memory Information Memory Installed Not applicable Memory Available Not applicable Memory Speed Not applicable Memory Channel Mode Not applicable Memory Technology Not applicable Each DIMM Size Not applicable PCI
Item Default value Minimum Clock Speed Not applicable Maximum Clock Speed Not applicable Processor L2 Cache Not applicable Processor L3 Cache Not applicable HT Capable Not applicable 64-Bit Technology Not applicable Device Information SATA-1 Not applicable SATA-2 Not applicable LOM MAC Address Not applicable Video Controller Not applicable Video BIOS version Not applicable Audio Controller Not applicable Wi-Fi Device Not applicable Cellular Device Not applicable Bluetooth Devic
Item Default value [Disabled, Enabled, Enabled w/PXE] Enabled w/PXE Serial Port1 — [Disable / RS-232 / RS-422/485 /RS-485] RS-232 Serial Port2 — [Disable / RS-232 / RS-422/485 /RS-485] RS-232 Serial Port3 — [Disable / RS-232 / RS-422/485 /RS-485] RS-232 Serial Port4 — [Disable / RS-232 / RS-422/485 /RS-485] RS-232 GPIO Module — GPIO 8 OUT [Enable/Disable] Enabled GPIO Module — GPIO 8 IN [Enable/Disable] Enabled SATA Operation — [Disabled/AHCI/RAID On] RAID On Drives— SATA-1: [Enable/Disabl
Item Default value [Auto/Intel HD Graphics] Auto Security (BIOS level 1) Item Default value Admin Password — Text entry for old password (grayed out when no password set), new password, and confirm new password Blank System Password — Text entry for old password (grayed out when no password set), new password, and confirm new password Blank Strong Password — [Enable/Disable] Disabled Password Configuration Admin Password Min 4 Admin Password Max 32 System Password Min 4 System Password Max
Item Default value Clear [Enable/Disable] Not applicable Computrace(R) — [Deactivate/Disable/Enable] Deactivate Chassis Intrusion — [Disable/Enable/On-Silent] Disable CPU XD Support — [Enable/Disable] Enabled OROM Keyboard Access — [Enable/One Time Enable/Disable] Enabled Admin Setup Lockout — [Enable/Disable] Disabled Secure boot Item Default value Secure Boot Enable — [Enable/Disable] Disabled Expert Key Management Enable Custom Mode [Enable/Disable] Disabled Custom Mode Key Management
Power management Item Default value AC Recovery (Desktop) — [Power Off/Power On/Last Power State] Last Power State Auto On Time Time Selection HH/MM [AM/PM] 12:00AM Day Selection [Disabled/Every Day/Weekdays/Select Days] Disabled Under [Select Days] when Enabled [Sunday/Monday…/Saturday] Not applicable USB Wake Support —[Enable/Disable] Enabled Wake on LAN/WLAN [Disabled/WLAN Only/LAN Only/LAN or WLAN/LAN with PXE Boot] Disabled Block Sleep(S3 state) [Enable/Disable] Disabled POST behavior I
Maintenance Item Default value Service Tag — , text entry capability when blank Not applicable Asset Tag — , text entry capability Not applicable SERR Messages —[Enable/Disable] Enabled BIOS Downgrade — [Enable/Disable] Enabled Data Wipe on Next Boot — [Enable/Disable] Disabled BIOS Recovery from Hard Drive —[Enable/Disable] Enabled System logs Item Default value List of BIOS events with "Clear Log" button to clear the log Not applicable 50 BIOS defau
11 Contacting Dell To contact Dell for sales, technical assistance, or customer service issues: 1. Go to www.dell.com/contactdell. 2. Verify your country or region in the drop-down list at the bottom of the page. 3. Select the appropriate service or support link based on your requirement or choose the method of contacting Dell that is convenient for you. Dell provides several online and telephone-based support and service options.
