Dell S2418HN Dell S2418NX User’s Guide Model: S2418HN/S2418NX Regulatory model: S2418Nt
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc.
Contents About Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Identifying Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Monitor Specifications . . . . . . .
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 FCC Notices (U.S. only) and Other Regulatory Information . . . . . . . . . 42 Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Setting Up Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . .
About Your Monitor Package Contents Your monitor ships with the components shown below. Make sure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
VGA cable (S2418NX only) HDMI cable • Drivers and documentation media • Quick Setup Guide • Safety and Regulatory Information Product Features The Dell S2418HN/S2418NX monitor has an active matrix, thinfilm transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: • 60.47 cm (23.8-inch) viewable area display (measured diagonally). 1920 x 1080 resolution with full-screen support for lower resolutions. • Mega dynamic contrast ratio (8,000,000:1). • Tilt capability.
Identifying Parts and Controls Front view Label 1 2 Description Function buttons (For more information, see Operating the Monitor) Power on/off button (with LED indicator) Back View Label Description 1 Security-lock slot 2 3 Barcode, serial number, and Service Tag label Letter etching 4 Cable-management slot Use Secures monitor with security lock (sold separately). Refer to this label if you need to contact Dell for technical support. Lists the regulatory approvals.
Bottom View Label Description Use 1 DC power connector To connect the monitor power adapter. 2 HDMI port Connect your computer with HDMI cable. 3 VGA port Connect your computer with VGA cable (optional). 4 Audio line-out port Connect speakers to playback audio coming through HDMI audio channel. Only supports 2-channel audio. NOTE: The audio line-out port does not support headphones. WARNING: Excessive sound pressure from earphones or headphones can cause hearing damage or loss.
Monitor Specifications Flat Panel Specifications Screen type Active matrix - TFT LCD Panel type In-Plane Switching (IPS) Viewable image Diagonal 60.47 cm (23.80 inches) Active Area Horizontal 527.04 mm (20.75 inches) Vertical 296.46 mm (11.67 inches) Area 156246.28 mm2 (242.18 inches2) Pixel pitch 0.2745 mm x 0.
Preset Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/ Vertical) 720 x 400 31.5 70.0 28.3 -/+ 640 x 480 31.5 60.0 25.2 -/- 640 x 480 37.5 75.0 31.5 -/- 800 x 600 37.9 60.0 40.0 +/+ 800 x 600 46.9 75.0 49.5 +/+ 1024 x 768 48.4 60.0 65.0 -/- 1024 x 768 60.0 75.0 78.8 +/+ 1152 x 864 67.5 75.0 108.0 +/+ 1280 x 1024 64.0 60.0 108.0 +/+ 1280 x 1024 80.0 75.0 135.0 +/+ 1600 x 900 60.
Physical Characteristics Connector type • HDMI connector • VGA connector • Audio-out Signal cable type VGA 1.5 M cable HDMI2.0 1.8 M cable Dimensions (with stand) Height 412.4 mm (16.24 inches) Width 539.0 mm (21.22 inches) Depth 162.2 mm (6.39 inches) Dimensions (without stand) Height 315.2 mm (12.41 inches) Width 539.0 mm (21.22 inches) Depth 43.8 mm (1.72 inches) Stand dimensions Height 173.7 mm (6.84 inches) Width 264.0 mm (10.39 inches) Depth 162.2 mm (6.
Environmental Characteristics Temperature Operating Non-operating Humidity Operating Non-operating Altitude Operating Non-operating Thermal dissipation 12 | About Your Monitor 0°C to 40°C (32°F to 104°F) –20°C to 60°C (–4°F to 140°F) 10% to 80% (non-condensing) 5% to 90% (non-condensing) 5,000 m (16,404 ft) (maximum) 12,192 m (40,000 ft) (maximum) 95.6 BTU/hour (maximum) 68.
Power Management Modes If you have VESA’s DPM-compliant video card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as power save mode*. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature.
Pin Assignments VGA connector Pin number 15-pin side of the connected signal cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5 V / 3.
HDMI connector Pin number 19-pin side of the connected signal cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK SHIELD 12 TMDS CLOCK- 13 CEC 14 Reserved (N.C.
Plug-and-Play You can install the monitor in any Plug-and-Play-compatible system. The monitor automatically provides the computer system with its extended display identification data (EDID) using display data channel (DDC) protocols so the computer can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor.
Setting Up the Monitor Attaching the Stand NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up. CAUTION: Place monitor on a flat, clean, and soft surface to avoid scratching the display panel.
Connecting the VGA cable (Optional) Connecting the HDMI cable Installing the Cable holder 18 | Setting Up the Monitor
Organizing Your Cables After attaching all necessary cables to your monitor and computer, (see Connecting Your Monitor for cable attachment) organize all cables as shown above.
Removing the Monitor Stand CAUTION: To prevent scratches on the LCD screen while removing the stand, make sure that the monitor is placed on a soft, clean surface. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up. To remove the stand: 1 Place the monitor on the cushion or thick sitting mat near the edge of table. 2 Tilt the stand downwards to access to the release latch.
Operating the Monitor Turning on the Monitor Press the button to turn on the monitor. Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.
The following table describes the front panel buttons: Front‑Panel Button Description 1 Use this button to choose from a list of preset color modes. Shortcut key: Preset Modes 2 Use this button to directly access the “Brightness/ Contrast” bar. Shortcut key: Brightness/Contrast 3 Menu 4 Use this menu button to launch the on-screen display (OSD) and select the OSD menu. See Accessing the Menu System. Use this button to go back to the main menu or exit the OSD main menu.
Front‑Panel Button Use the buttons on the front of the monitor to adjust the image settings. Front Panel Button Description 1 Use the Up (increase) and Down (decrease) keys to adjust items in the OSD menu. Up Down 2 Use the OK button to confirm your selection. OK Use the Back button to go back to the previous menu.
Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: Any changes you make using the OSD menu are automatically saved if you move to another OSD menu, exit the OSD menu, or wait for the OSD menu to disappear. 1 Press the button to launch the OSD menu and display the main menu. 2 Press the and buttons to move between options. As you move from one icon to another, the option name is highlighted.
Icon Menu and Submenus Description Brightness/ Contrast Use this menu to activate Brightness/Contrast adjustment. Brightness Brightness adjusts the luminance of the backlight (minimum 0; maximum 100). Press the button to increase brightness. Press the button to decrease brightness. NOTE: Manual adjustment of Brightness is disabled when Dynamic Contrast is switched on. Adjust the Brightness first, and then adjust Contrast only if further adjustment is necessary.
Icon Menu and Submenus Description Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display menu.
Icon Menu and Submenus Description Input Source Use the Input Source menu to select between different video inputs that are be connected to your monitor. VGA Select the VGA input when you are using the analog (VGA) connector. Use to select the VGA input source. HDMI Select the HDMI input when you are using the HDMI connector. Use to select the HDMI input source. Auto Select to select Auto Select, the monitor scans for available Use input sources.
Icon Menu and Submenus Description Preset Modes When you select Preset Modes, you can choose Standard, ComfortView, Multimedia, Movie, Movie HDR, Game, Game HDR, Warm, Cool or Custom Color from the list. • Standard: Default color settings. This is the default preset mode. • ComfortView: Decreases the level of blue light emitted from the screen to make viewing more comfortable for your eyes. • Multimedia: Ideal for multimedia applications. • Movie: Loads color settings ideal for movies.
Icon Menu and Submenus Description Input Color Format Allows you to set the video input mode to: • RGB: Select this option if your monitor is connected to a computer (or DVD player) using the HDMI. • YPbPr: Select this option if your DVD player supports only YPbPr output. Reset Color Display Resets your monitor’s color settings to the factory defaults. Use the Display menu to adjust image. Aspect Ratio Horizontal Position Adjust the image ratio to Wide 16:9, 4:3, or 5:4.
Icon Menu and Submenus Vertical Position Sharpness Pixel Clock Description Use or to adjust the image up or down. Minimum is ‘0’ (-). Maximum is ‘100’ (+). NOTE: Horizontal Position and Vertical Position adjustments are only available for “VGA” input. Makes the image look sharper or softer. Use or to adjust the sharpness from ‘0’ to ‘100’. The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Icon Menu and Submenus Description Energy Power Allows you to set the state of the power light to save energy. Button LED Reset Energy Select this option to restore default Energy settings.
Icon Menu and Submenus Description Menu Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on. Language Set the OSD display to one of eight languages. (English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese, or Japanese). Transparency Select this option to change the menu transparency by using and (min. 0 / max. 100).
Icon Menu and Submenus Description Personalize Select from Preset Modes, Brightness/Contrast, Auto Adjust, Input Source, Aspect Ratio set as shortcut key. Reset Personalization Restores shortcut keys to factory defaults.
Icon Menu and Submenus Description Other DDC/CI 34 | Select this option to adjust the OSD settings, such as the DDC/CI, LCD conditioning, and so on. DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor settings using software on your computer. Select Disable to turn off this feature. Enable this feature for best user experience and optimum performance of your monitor.
Icon Menu and Submenus Description LCD Helps reduce minor cases of image retention. Depending on Conditioning the degree of image retention, the program may take some time to run. Select Enable to start the process. Reset Others Restores other settings, such as DDC/CI, to factory defaults. Factory Reset Restores all OSD settings to the factory defaults. NOTE: This monitor has a built-in feature to automatically calibrate the brightness to compensate for LED aging.
OSD Warning Messages When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), manual brightness adjustment is disabled. When the monitor does not support a particular resolution mode, you can see the following message: This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
Activate the computer and wake up the monitor to gain access to the OSD. If you press any button other than the power button, the following messages will appear depending on the selected input: If either VGA, HDMI input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears. or See Troubleshooting for more information.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1 Turn off both your computer and the monitor. 2 Unplug the video cable from the back of the computer.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly. Built-in Diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode.
Common Problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms What You Experience No Video/Power No picture LED off Possible Solutions • Ensure that the video cable connecting the monitor and the computer is properly connected and secure. • Verify that the power outlet is functioning properly using any other electrical equipment. • Ensure that the power button is depressed fully.
Common Symptoms What You Experience Missing Color Picture missing color Possible Solutions • Perform monitor self-test. • Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. • Check for bent or broken pins in the video cable connector. Wrong Color Picture color • Change the settings of the Preset Modes in the not good Color menu OSD depending on the application. • Adjust R/G/B value under Custom. Color in Color menu OSD.
Appendix Safety Instructions For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces. WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Safety, Environmental, and Regulatory Information (SERI). FCC Notices (U.S.
Setting Up Your Monitor NOTE: The maximum input resolution to 3840 x 2160 while you select movie HDR or game HDR in Color on OSD functions can be supported. Setting Display Resolution to 1920 x 1080 For best performance, set the display resolution to 1920 x 1080 pixels by performing the following steps: In Windows Vista, Windows 7, Windows 8 or Windows 8.1: 1 For Windows 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2 Right-click on the desktop and click Screen Resolution.
Non-Dell computer In Windows Vista, Windows 7, Windows 8 or Windows 8.1: 1 For Windows 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2 Right-click on the desktop and click Personalization. 3 Click Change Display Settings. 4 Click Advanced Settings. 5 Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 6 Refer to the graphic card provider website for updated driver (for example, http://www.ATI.
Maintenance Guidelines Cleaning Your Monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. CAUTION: Read and follow the Safety Instructions before cleaning the monitor. For best practices, follow these instructions in the list below while unpacking, cleaning, or handling your monitor: • To clean your anti-static screen, lightly dampen a soft, clean cloth with water.
