User‘s Guide Dell E2015HV Dell E2215HV Dell E2715H Model No.
NOTE: A NOTE indicates important information that helps you make better use of your monitor. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2014 Dell Inc. All rights reserved. Information in this document is subject to change without notice. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Contents Dell Display Manager User's Guide . . . . . . . . . . . . . . . . . 6 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the Quick Settings Dialog . . . . . . . . . . . . . . . . 6 Setting Basic Display Functions . . . . . . . . . . . . . . . . .7 Assigning Preset Modes to Applications . . . . . . . . . . . .7 Applying Energy-Conservation Features . . . . . . . . . . .
Setting Up the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . 27 Connecting Your Monitor . . . . . . . . . . . . . . . . . . . 29 Connecting the blue VGA Cable . . . . . . . . . . . . . . . . . . . . .29 Connecting the white DVI cable (for E2715H only) . . . . . . . . . 30 Connecting the white DP cable (for E2715H only) . . . . . . . . . .
FCC Notices (U.S. Only) and Other Regulatory Information . . . . . . . . . . . . . . . . . 67 Contact Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Setting Up Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . 68 Setting the display resolution to 1600 x 900 (for E2015HV) or 1920 x 1080 (for E2215HV/E2715H) (Maximum) . . . . 68 If you have a Dell desktop or a Dell portable computer with Internet access . . . . . . . . . .
Dell Display Manager User's Guide Overview Dell Display Manager is a Windows application used to manage a monitor or a group of monitors. It allows manual adjustment of the displayed image, assignment of automatic settings, energy management, image rotation and other features on select Dell models. Once installed, Dell Display Manager will run each time the system starts and will place its icon in the notification tray.
The Quick Settings dialog box also provides access to Dell Display Manager’s advanced user interface which is used to adjust Basic functions, configure Auto Mode and access other features. Setting Basic Display Functions A Preset Mode for the selected monitor can be manually applied using the menu on the Basic tab. Alternatively, Auto Mode can be enabled. Auto Mode causes your preferred Preset Mode to be applied automatically when specific applications are active.
Dell Display Manager is pre-configured for many popular applications. To add a new application to the assignment list, simply drag the application from the desktop, Windows Start Menu or elsewhere, and drop it onto the current list. NOTE: Preset Mode assignments targeting batch files, scripts, and loaders, as well as non-executable files such as zip archives or packed files, are not supported and will be ineffective.
Applying Energy-Conservation Features On supported Dell models, the PowerNap tab will be available to provide energy conservation options. When the screensaver activates, the monitor’s Brightness can automatically be set to minimum level or the monitor can be put to sleep in order to save additional power.
About Your Monitor Package Contents Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell if anything is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
• DVI Cable E2715H • Drivers and Documentation media • Quick Setup Guide • Safety and Regulatory Information Product Features The Dell E2015HV/E2215HV/E2715H flat-panel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display and LED backlight. The monitor’s features include: • E2015HV: 49.53cm (19.5 inches) diagonal viewable image size, 1600 x 900 resolution, plus full-screen support for lower resolutions. • E2215HV: 54.69 cm (21.
• • • • E2715H: TCO Certified Displays. E2015HV/E2215HV: Surpports VGA. E2715H: Surpports VGA, DVI-D, Displayport 1.2. Energy Gauge shows the energy level being consumed by the monitor in real time. Identifying Parts and Controls Front View E2015HV: E2215HV/E2715H: 1.
Back View E2015HV: E2015HV Label Back View with Monitor Stand Description Use To mount the monitor. 2 VESA mounting holes (100 mm) Regulatory rating label 3 Barcode serial number label Refer to this label if you need to contact 4 Security lock slot 5 Dell soundbar mounting slots 1 Lists the regulatory approvals. Dell for technical support. Secures monitor with security lock (security lock not included). To attach the optional Dell Soundbar.
Label Description Use To mount the monitor. 2 VESA mounting holes (100 mm) Regulatory rating label 3 Barcode serial number label Refer to this label if you need to contact 4 Security lock slot 5 Dell soundbar mounting slots Cable management slot 1 6 Lists the regulatory approvals. Dell for technical support. Secures monitor with security lock (security lock not included). To attach the optional Dell Soundbar. Use to organize cables by placing them through the slot.
Side View E2015HV/E2215HV E2715H Right Side Bottom View E2015HV/E2215HV: Label Description Use 1 AC power connector To connect the monitor power cable. 2 VGA connector To connect your computer to the monitor using a VGA cable. E2715H: Label Description Use 1 AC power connector To connect the monitor power cable. 2 Displayport connector 3 DVI connector 4 VGA connector To connect your computer to the monitor using a DP cable. To connect your computer to the monitor using a DVI cable.
Monitor Specifications The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor. Power Management Modes If you have VESA’s DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning.
Activate the computer and monitor to gain access to the OSD. NOTE: The Dell E2015HV/E2215HV/E2715H monitor is ENERGY STAR®compliant. *Z ero-power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. ** Maximum power consumption with max luminance and contrast.
Pin Assignments 15-pin D-Sub connector Pin Number Monitor Side of the 15-pin Side Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 DDC +5 V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock 18 About Your Monitor
DVI Connector Pin Number 24-pin Side of the Connected Signal Cable 1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5 V power 15 Self test 16 Hot Plug Detect 17 TMDS RX0- 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- About Your Monitor 19
DisplayPort connector Pin Number 20-pin Side of the Connected Signal Cable 1 ML0(p) 2 GND 3 ML0(n) 4 ML1(p) 5 GND 6 ML1(n) 7 ML2(p) 8 GND 9 ML2(n) 10 ML3(p) 11 GND 12 ML3(n) 13 GND 14 GND 15 AUX(p) 16 GND 17 AUX(n) 18 HPD 19 DP_PWR_Return 20 +3.
Plug and Play Capability You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.
Color Depth 16.7 mil colors 16.7 mil colors 16.7 mil colors Color Gamut 85 % (typical) ** 85 % (typical) ** 85 % (typical) ** ** E 2015HV/E2215HV/E2715H color gamut (typical) is based on CIE1976 (85 %) and CIE1931 (72 %) test standards.
Preset Display Modes The following table lists the preset modes for which Dell guarantees image size and centering: E2015HV： Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Sync Polarity Pixel Clock (Horizontal/ (MHz) Vertical) VESA, 720 x 400 31.5 70.1 28.3 -/+ VESA, 640 x 480 31.5 59.9 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.
Physical Characteristics The following table lists the monitor's physical characteristics: Model Number E2015HV Connector type E2215HV 15-pin D-subminiature (Blue connector) E2715H 15-pin D-subminiature (Blue connector)； DVI-D: white connector； Signal cable type DP: Black connector VGA VGA DVI-D DisplayPort Dimensions: (with stand) Height 358.8 mm 395.8 mm 459.0 mm (14.12 inches) (15.59 inches) (18.07 inches) 513.2 mm 641.5 mm (20.21 inches) (25.26 inches) 165.5 mm 165.5 mm 180.0 mm (6.
Stand dimensions: Height Width Depth 149.0 mm 171.9 mm 339.1 mm (5.87 inches) 180.6 mm (6.77 inches) 180.5 mm (13.35 inches) 220.0 mm (7.11 inches) 165.5 mm (7.11 inches) 165.5 mm (8.66 inches) 180.0 mm (6.52 inches) (6.52 inches) (7.09 inches) 3.65 kg (8.03 lb) 4.25 kg (9.35 lb) 8.55 kg (18.81 lb) 3.00 kg (6.60 lb) 3.50 kg (7.70 lb) 6.15 kg (13.53 lb) 2.38 kg (5.24 lb) 2.90 kg (6.38 lb) 4.53 kg (9.97 lb) 0.33 kg (0.73 lb) 0.40 kg (0.88 lb) 1.19 kg (2.
LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a “bright dot.” When the pixel remains black, it is known as a “dark dot.” In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability.
Setting Up the Monitor Attaching the Stand NOTE: The stand base is detached when the monitor is shipped from the factory. 1. Assemble the stand riser to stand base.
a. Place the monitor stand base on a stable table top. b. Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place. c. Tighten the screw located on the base. 2. Attach the stand assembly to the monitor: E2015HV/E2215HV: a. Place the monitor on a soft cloth or cushion near the edge of desk. b. Align the stand assembly bracket to the monitor groove. c. Insert the bracket towards monitor until it locks in place. E2715H: a.
Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. 2. Connect the white (digital DVI-D) or the blue (analog VGA) or the black (DisplayPort) display connector cable to the corresponding video port on the back of your computer. Do not use three cables at the same time.
Connecting the white DVI cable (for E2715H only) Connecting the black DP cable (for E2715H only) Note: The graphics are used for the purpose of illustration only. Appearance on the computer may vary. Organizing Your Cables (for E2215HV / E2715H) After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment), organize all cables as shown above.
Attaching the Cable Cover (for only E2715H) NOTE: The Cable Cover is detached when the monitor is shipped from the factory. To attach the Cable Cover: 1. Fit the two tabs on the bottom part of the Cable Cover to the groove on the back of the monitor. 2. Press the Cable Cover till it snaps into place. Removing the Monitor Stand Note: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the removal instructions.
E2215HV: 1. Use a long screwdriver to push the release latch located in a hole just above the stand. 2. Once the latch is released, remove the base away from the monitor. E2715H: 1. Press and hold the stand-release button. 2. Lift the stand up and away from the monitor.
Wall Mounting (Optional) figure 1 3 BZ02 Canada Class B ICES-003/NMB-003. Consumo de energía: XX.X Wh Consumo de energía en modo de espera: X.XX Wh Удельная мощность рабочего режима - X.XXX Вт/см² Потребляемая мощность изделием в режиме ожидания - X.XX Вт Потребляемая мощность изделием в выключенном режиме - X.XX Вт Q40G019N-700-42A DELL Flat Panel Monitor /Monitor Plano Panel / 液晶顯示器/液晶显示器/모니터 Model No.
Operating the Monitor Power On the Monitor Press the button to turn on the monitor. Using the Front-Panel Controls Use the keys on the front of the monitor to adjust the image settings. E2015HV/E2215HV: Front-Panel Keys A Preset modes B C Description Use the Preset modes key to choose from a list of preset color modes. See Using the OSD Menu. Use the Brightness / Contrast key to direct access Brightness /Contrast to the "Brightness" and "Contrast" control menu.
E2715H: Front-Panel Keys A Preset modes B Input Source Description Use the Preset modes key to choose from a list of preset color modes. See Using the OSD Menu. Use the Input Source key to select between different video signals that may be connected to your monitor. • VGA input • DVI-D input Menu • Displayport input Use the Menu key to open the on-screen display (OSD). Exit Use the Exit key to exit on-screen display (OSD) from menu and sub-menus.
Front-Panel Keys Description Up Use the Up key to adjust (increase ranges) items in the OSD menu. Down Use the Down key to adjust (decrease ranges) items in the OSD menu. A B C Use the OK key to confirm your selection. OK D Use the Back key to go back to the previous menu. Back Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes.
NOTE: Auto Adjust is only available when you use the analog (VGA) connector. 2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the button again. 4. Press the and buttons to select the desired parameter. 5. Press the button to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes. 6.
The table below provides a list of all the OSD menu options and their functions. Icon Menu and Submenus Energy Use Brightness/ Contrast Description This meter shows the energy level being consumed by the monitor in real time. Use the Brightness and Contrast menu to adjust the Brightness/Contrast.
Brightness Contrast Auto Adjust Allows you to adjust the brightness or luminance of the backlight. Press the key to increase brightness and press the key to decrease brightness (min 0 ~ max 100). Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness first, and adjust contrast only if you need further adjustment. Press the key to increase contrast and press the key to decrease contrast (min 0 ~ max 100).
The following dialog appears on a black screen as the monitor self-adjusts to the current input: Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display. NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
Input Source (for E2715H only) Use the Input Source menu to select between different video signals that may be connected to your monitor. Auto Select VGA Select Auto Select to scan for available input signals. Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source. Select Displayport input when you are using the DP connector.
Input Color Format Preset Modes Allows you to set the video input mode to: • RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI to DVI adapter. • YPbPr: Select this option if your DVD player supports only YPbPr output. Allows you to choose from a list of preset color modes.
tandard: Loads the monitor's default color S settings. This is the default preset mode. • Multimedia: Loads color settings ideal for multimedia applications. • Movie: Loads color settings ideal for movies. • Game: Loads color settings ideal for most gaming applications. • Paper: Loads brightness and sharpness settings ideal for viewing text. Blend the text background to simulate paper media without affecting color images. Applies to RGB input format only. • Warm: Increases the color temperature.
Saturation This feature can adjust the color saturation of the video image. Use or to adjust the saturation from ‘0’ to ‘100’. Press to increase the monochrome appearance of the video image. Press to increase the colorful appearance of the video image. NOTE: Saturation adjustment is available only when you select Movie or Game preset mode. Image Enhance Automatically sharpen images, enhance hues, boost color contrast and enhance image clarity.
Aspect Ratio Adjusts the image ratio as Wide 16:9, 4:3, or 5:4. NOTE: Wide 16:9 adjustment is not required at maximum preset resolution 1600 x 900 (for E2015HV) or 1920 x 1080 (for E2215HV/E2715H). Horizontal Position Vertical Position Sharpness Pixel Clock Phase Use or the buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+). Use the or buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+). This feature can make the image look sharper or softer.
Energy Power Button LED Reset Energy Settings Allows you to set the power LED indicator on or off during active to save energy. Select this option to restore default Energy Settings.
Menu Select this option to adjust the settings of the OSD such as, the languages of the OSD, the amount of time the menu remains on screen, and so on. Language Allows you to set the OSD display to one of eight languages: English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese, or Japanese. Allows you to adjust the OSD background from opaque to transparent.
Timer Lock Allows you to set the time for which the OSD remains active after you press a key on the monitor. Use the and keys to adjust the slider in 1 second increments, from 5 to 60 seconds. Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All keys are locked except key. NOTE: When the OSD is locked, pressing the menu key takes you directly to the OSD settings menu, with 'OSD Lock' pre-selected on entry.
Shortcut Key 1 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source" （for E2715H only）, "Aspect Ratio" and set as shortcut key.
Shortcut Key 2 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source" （for E2715H only） , "Aspect Ratio" and set as shortcut key.
Reset Personalization Allows you to restore shortcut key to the default setting.
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like the brightness, color balance etc. Enable (Default): Optimizes the performance of your monitor and provides a better customer experience. Disable: Disables the DDC/CI option and the following message appears on the screen.
LCD Conditioning This feature will help reduce minor cases of image retention. If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take some time. LCD Conditioning feature cannot remove severe cases of image retention or burn-in. NOTE: Use LCD Conditioning only when you experience a problem with image retention. The below warning message appears once user selects “Enable" LCD Conditioning.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the horizontal and vertical frequency ranges addressable by this monitor. Recommended mode is 1600 x 900 (for E2015HV) or 1920 x 1080 (for E2215HV/E2715H). You will see the following message before the DDC/CI function is disabled.
Activate the computer and wake up the monitor to gain access to the OSD. If you press any button other than the power button, the following messages will appear depending on the selected input: If VGA or DVI or DP cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode after 5 minutes if left at this state.
See Solving Problems for more information.
Setting the Maximum Resolution Windows Vista® ,Windows® 7 ,Windows® 8 or Windows 8.1: 1. For Windows® 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen Resolution. 3. Click the dropdown list of the screen resolution and select 1600 x 900 (for E2015HV) or 1920 x 1080 (for E2215HV/E2715H). 4. Click OK.
Using the Tilt Tilt With the stand assembly, you can tilt the monitor for the most comfortable viewing angle. E2015HV/E2215HV: E2715H: NOTE: The stand base is detached when the monitor is shipped from the factory.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instruction Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer.
Built-in Diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. 1 2 3 4 5 NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. To run the built-in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2.
Common Problems The following table contains general information about common monitor problems you might encounter and the possible solutions. Common Symptoms What You Experience No Video/Power LED off No Video/Power LED on Poor Focus Shaky/Jittery Video Possible Solutions No picture • Ensure that the video cable connecting the monitor and the computer is properly connected and secure. • Verify that the power outlet is functioning properly using any other electrical equipment.
Missing Pixels Stuck-on Pixels Brightness Problems Geometric Distortion Horizontal/Vertical Lines LCD screen has spots • Cycle power on-off. • Pixel that is permanently off is a natural defect that can occur in LCD technology. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: http://www.dell.com/support/ monitors. LCD screen has bright • Cycle power on-off. • Pixel that is permanently off is a spots natural defect that can occur in LCD technology.
Synchronization Problems Safety-Related Issues Intermittent Problems Missing Color Wrong Color Image retention from a static image left on the monitor for a long period of time Screen is scrambled or • Reset the monitor to Factory Settings. appears torn • Perform Auto Adjust via OSD. • Adjust Phase and Pixel Clock controls via OSD. • Perform monitor self-test feature check to determine if the scrambled screen appears in self-test mode. • Check for bent or broken pins in the video cable connector.
Product-Specific Problems Specific Symptoms What You Experience Screen image is too small Image is centered on • Check the Aspect Ratio setting in the Display OSD. screen, but does not • Reset the monitor to Factory fill entire viewing area Settings. Cannot adjust the monitor with the buttons on the front panel OSD does not appear on the screen No Input Signal when user controls are pressed No picture, the LED • Check the signal source. Ensure the computer is not in the light is white.
Dell Soundbar Problems Common Symptoms What You Experience No sound for system where the Soundbar draws power from an AC adapter No Sound Distorted Sound Possible Solutions No power to • Turn the Power/Volume knob Soundbar - the power on the Soundbar clockwise to the middle position; check if indicator is off the power indicator (white LED) on the front of the Soundbar is illuminated. • Confirm that the power cable from the Soundbar is plugged into the adapter.
Distorted Sound Unbalanced Sound Output Low Volume Other audio source is • Clear any obstructions between the Soundbar and the user. used • Confirm that the audio line-in plug is completely inserted into the jack of the audio source. • Decrease the volume of the audio source. • Turn the Power/Volume knob on the Soundbar counterclockwise to a lower volume setting. • Clean and reseat the audio linein plug. Sound from only one • Clear any obstructions between the Soundbar and the user.
Appendix WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC Notices (U.S. Only) and Other Regulatory Information For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.
Setting Up Your Monitor Setting the display resolution to 1600 x 900 (for E2015HV) or 1920 x 1080 (for E2215HV/E2715H) (Maximum) For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1600 x 900 (for E2015HV) or 1920 x 1080 (for E2215HV/E2715H) pixels by performing the following steps: In Windows Vista®, Windows® 7, Windows® 8 or Windows 8.1: 1. For Windows® 8 or Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2.
If you have a Dell desktop or a Dell portable computer with Internet access 1. Go to http://www.dell.com/support, enter your service tag, and download the latest driver for your graphics 2. After installing the drivers for your graphics adapter, attempt to set the resolution to 1600 x 900 (for E2015HV) or 1920 x 1080 (for E2215HV/ E2715H) again.
Procedures for setting up dual monitors in Windows Vista® , Windows® 7 , Windows® 8 or Windows® 8.1 For Windows Vista® Connect the external monitor(s) to your laptop or desktop using a video cable (VGA, DVI, DP, HDMI etc.) and follow any of the below setup method. Method 1: Using keyboard shortcut “Win+P” 1. Press the Windows logo key + P on your keyboard. 2. While holding down the Windows logo key, press P to toggle between the display selections. Method 2: Using the “Personalize” menu 1.
2. Click Display Settings. 3. Click Identify Monitors. • You may need to restart your system and repeat steps 1 to 3 if the system does not detect the added monitor.
For Windows® 7 Connect the external monitor(s) to your laptop or desktop using a video cable (VGA, DVI, DP, HDMI etc.) and follow any of the below setup method. Method 1: Using keyboard shortcut “Win+P” 1. Press the Windows logo key + P on your keyboard. 2. While holding down the Windows logo key, press P to toggle between the display selections. Method 2: Using the “Screen Resolution” menu 1. Right-click on the desktop and click Screen resolution.
2. Click Multiple displays to choose a display selection. If you do not see the additional monitor listed, click Detect. • You may need to restart your system and repeat steps 1 to 3 if the system does not detect the added monitor.
For Windows® 8 or Windows 8.1 Connect the external monitor(s) to your laptop or desktop using a video cable (VGA, DVI, DP, HDMI etc.) and follow any of the below setup method. Method 1: Using keyboard shortcut “Win+P” 1. Press the Windows logo key + P on your keyboard. 2. While holding down the Windows logo key, press P to toggle between the display selections. Method 2: Using the “Screen Resolution” menu 1. From the Start screen, select Desktop tile to switch to the Classic Windows desktop.
2. Right-click on the desktop and click Screen resolution. 3. Click Multiple displays to choose a display selection. If you do not see the additional monitor listed, click Detect. • You may need to restart your system and repeat steps 1 to 3 if the system does not detect the added monitor.
Setting Display Styles For Multiple Monitor After the external monitor(s) have been set up, users can select the desired display style from Multiple displays menu: Duplicate, Extend, Show Desktop On. • Duplicate these displays: Duplicate the same screen on two monitors with the same resolution, chosen based on the monitor with a lower resolution.
For Windows® 8 or Windows 8.
• Extend these displays: This option is recommended when an external monitor is connected to a laptop, and each monitor can display different screen independently to improve user convenience. The relative position of the screens can be set up here, for example monitor 1 may be set up to be to the left of monitor 2 or vice versa. This depends on the physical position of the LCD monitor in relation to the laptop. The horizontal line displayed on both monitors can be based on the laptop or external monitor.
For Windows® 7 For Windows® 8 or Windows 8.
• Show desktop only on…: Display the status of a particular monitor. This option is typically chosen when the laptop is used as a PC so the user can enjoy a large external monitor. Most current laptops support mainstream resolutions. As shown in the figure above, the resolution of the laptop monitor is only 1280 x 800, but after connecting a 27” external LCD monitor, users can immediately improve their visual enjoyment to 1920 x 1080 Full HD quality.
For Windows® 7 Setting Up Your Monitor 81
For Windows® 8 or Windows 8.
