Installation Guide

ManualsBrandsDell ManualsElectronicsRFID 13.56MHz Wireless Module

OEMInstallationGuidance

ForDellRFID13.56MHzWirelessModule,FCCID:E2K‐DWRFID1501



‐OEMintegratorsmustensurethatitsproductiselectricallyidenticaltoDell’sreferencedesigns.Any

modificationstoDell’sreferencedesignsmayinvalidateregulatoryapprovalsinrelationtothe

product,ormaynecessitatenotificationstotherelevant

regulatoryauthorities.

‐OEMintegratorsareresponsibleforregressiontestingtoaccommodatechangestodesigns,new

antennas,andhostandsubmitforC2PCfilings.

Colocationwithothertransmittermoduleswillbeaddressedthroughfilingsforthoseco‐located

transmitterswhennecessaryorthatcolocationofothertransmitterswillbeaccordingto

applicable

KDBguidelinesincludingthoseforRFexposure

‐Thefinalsystemintegratormustensurethereisnoinstructionprovidedintheusermanualor

customerdocumentationindicatinghowtoinstallorremovethetransmitter

‐Appropriatelabelsmustbeaffixedtotheproductthatcomplieswithapplicableregulationsinall

respects.

Theregulatorylabelonthefinalsystemmustincludethestatement:“ContainsFCCID:

E2K‐DWRFID1501and/orIC:1514B‐DWRFID1501”.

‐Auser’smanualorinstructionmanualmustbeincludedwiththeprod uctthatcontainsthetextas

requiredbyapplicablelawshallbeprovidedtoOEMintegrators.Theymayinclude:



1.USA—FederalCommunicationsCommission(FCC)

FCCCOMPLIANCESTATEMENT:

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwo

conditions:

Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterference

received,includinginterferencethatmaycauseundesiredoperation.

INFORMATION

TOUSER:

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,

pursuanttoPart15ofFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst

harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,uses,andcanradiate

radio

frequencyenergy.Ifnotinstalledandusedinaccordancewiththeinstructions,itmaycause

harmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewill

notoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor

televisionreception,whichcanbedeterminedby

tuningtheequipmentoffandon,theuseris

encouragedtotryandcorrecttheinterferencebyoneormoreofthefollowingmeasures:

‐Reorientorrelocatethereceivingantenna

‐Increasethedistancebetweentheequipmentandthereceiver.

‐Connecttheequipmenttooutletonacircuitdifferentfrom

thattowhichthereceiverisconnected.

‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.



FCCCaution:Anychangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor

compliancecouldvoidtheuser'sauthoritytooperatethisequipment.

Thefinalhostmanualshallincludethefollowing

regulatorystatement:

Summary of content (2 pages)

PAGE 1
OEM Installation Guidance For Dell RFID 13.56MHz Wireless Module, FCC ID: E2K‐DWRFID1501 ‐ OEM integrators must ensure that its product is electrically identical to Dell’s reference designs. Any modifications to Dell’s reference designs may invalidate regulatory approvals in relation to the product, or may necessitate notifications to the relevant regulatory authorities.
PAGE 2
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.