Statement of Volatility – Dell DSS 1500 Dell DSS 1500 contain both volatile and non-volatile (NV) components. Volatile components lose their data immediately upon removal of power from the component. Non-volatile components continue to retain their data even after the power has been removed from the component. R6Configuration option information (pertinent to options such as microprocessors, remote access controllers, and storage controllers) is available by component separately.
Item Non-Volatile or Volatile Quantity Reference Designator Size Flash memory Non-Volatile 1 U_FLASH 32 Mb BP FRU image Non-Volatile 1 U_BP_FRU 256 Bytes Expander FRU image Non-Volatile 1 U_EXP_FRU 512 Bytes 1 U_SEP1 Flash:32KB+4KB EEPROM: 2KB 1U 4x3.5”and 1U 8x2.
Item Type (e.g. Flash PROM, EEPROM) Can user programs or operating system write data to it during normal operation? PCH Internal CMOS RAM Battery-backed CMOS RAM No BIOS Password Battery-backed CMOS RAM Yes BIOS SPI Flash SPI Flash No iDRAC SPI Flash SPI Flash No BMC EMMC eMMC NAND Flash No System CPLD RAM RAM No System Memory DRAM Yes Internal USB Key Flash Yes Trusted Platform Module (TPM, TPM 2.
1-Wire EEPROM 1-Wire EEPROM No SPD SPD No SBR SBR No Flash Flash No ONFI Backup Flash ONFI Backup Flash No SDRAM SDRAM No NVSRAM NVSRAM No FRU FRU No 1-Wire EEPROM 1-Wire EEPROM No SBR SBR No Flash Flash No H330, H330M PERCs 2U in Left Ear, 1U in x4 and x8 CP SPI Flash SPI Flash No
Item Purpose? (e.g. boot code) How is data input to this memory? PCH Internal CMOS RAM Real-time clock and BIOS configuration settings BIOS BIOS Password Password to change BIOS settings Keyboard BIOS SPI Flash Boot code, system configuration information, UEFI environment, Flash descriptor, ME SPI interface via iDRAC iDRAC SPI Flash iDRACUboot (bootloader), server management persistent store (i.e.
Item Purpose? (e.g. boot code) How is data input to this memory? Flash memory Firmware Common Flash memory Interface (CFI) BP FRU image FRU I2C interface via iDRAC Expander FRU image FRU I2C interface via iDRAC 1U 4x3.5”and 1U 8x2.5”Backplanes SEP internal flash Integrated Flash+EEPROM I2C interface via iDRAC NVSRAM Configuration data ROC writes configuration data to NVSRAM FRU Card manufacturing information Programmed at ICT during production.
Item How is this memory write protected? How is the memory cleared? PCH Internal CMOS RAM N/A – BIOS only control 1) Set NVRAM_CLR jumper to clear BIOS configuration settings at boot and reboot system; 2) AC power off system, remove coin cell battery for 30 seconds, replace battery and power back on; 3) restore default configuration in F2 system setup menu. BIOS Password N/A Place shunt on J_PSWD_NVRAM jumper pins 2 and 4.
Item How is this memory write protected? How is the memory cleared? Flash memory Hardware strapping Not user clearable BP FRU image Hardware strapping Not user clearable Expander FRU image Hardware strapping Not user clearable 1U 4x3.5” and 1U 8x2.5”Backplanes SEP internal flash Program write protect bit Not user clearable NVSRAM Not WP.
Not WP. Not visible to Host Processor Cannot be cleared with existing tools available to the customer SPI Flash Hardware strapping Not user clearable MCU N/A Not user clearable Flash PCIe SSD Extension Card NOTE: For any information that you may need, direct your questions to your Dell Marketing contact. __________ © 2015 Dell Inc. Trademarks used in this text: Dell™, the DELL logo, and DSS™are trademarks of Dell Inc.