Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
Revisions Date Description January 2014 Initial release THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND. © 2014 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the express written permission of Dell Inc. is strictly forbidden. For more information, contact Dell.
Table of contents Revisions ............................................................................................................................................................................................. 2 Executive summary .......................................................................................................................................................................... 4 1 Prepare each of the DR Series Deduplication Appliances ...........................................
Executive summary This paper provides information about how to set up replication between Dell DR Series Deduplication Appliances for NetVault 9.2 backup. This paper is a quick reference guide and does not include all DR Series Deduplication Appliance deployment best practices. See the DR Series Deduplication Appliance documentation for other data management application best practices whitepapers at http://www.dell.
1 5 Prepare each of the DR Series Deduplication Appliances 1. Add NetVault serve machine and DR Series Deduplication Appliance to the same domain (Optional: only applies when both DR and NVBU server are in Active Directory Domain environment) • DR Series Deduplication Appliance Console: System Configuration- > Active Directory - > Join Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
2. Create container in DR Series Deduplication Appliance console. Enter a Container Name, select Enable CIFS check box. NetVault supports CIFS and NFS protocols. 3. Select preferred client access credentials. Click Create a New Container. Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
4. Confirm that the container is added. 5. 7 Click Edit. Note down the container share/export path, which you will use later to target the DR container. Click Cancel to exit. Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
2 Set Up NetVault 2.1 Procedure of backup data to source DR 8 1. Add NetVault serve to the same domain as DR Series Deduplication Appliance (Optional: only applies when both DR and NVBU server are in Active Directory Domain environment). • NetVault Window 2012 server Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
2. On NetVault server, launch Windows Services console, set the logon information for ‘NetVault Process Manager’ service. Enter CIFS credential that has access permission to DR container share(s), and then restart the service. 3. Launch NVBU Console, click Device Management Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
4. Choose Add menu, click Add - > Add Library. In the pop- up Add Library window, highlight a client, right click on that machine and choose Create Virtual Library 5. 10 Enter source DR container share UNC path, configure other parameters, click OK. Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
6. On Library Selection tab, right click the newly created library, choose Select. 7. 11 On Drive Selection tab, pick each of the Drives available for the library, right click on the drive(s), choose Select. Make sure all drives are configured in Configure tab, and the library is added successfully. Save the library. Verify that the library device is Online. Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
8. Create backup job by clicking Backup button on NVBU Console. In Backup job creation window, choose the source DR container library device under Target tab. 12 Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
9. On Advanced Options, uncheck Enable Deduplication. 10. After the backup job is completed, a restore point will appear in NVBU Restore. 13 Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
2.2 14 Set up DR Native Replication from DR Console 1. On source DR console, go to Replication - > Create 2. Select the source container in step1, choose Source in step 3, choose ‘Create container on remote system’ in step4. Enter target DR hostname/IP and management credential, click Create Replication. Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
3. Make sure replication session is created successfully, and Peer Status is Online. Check Replication Status from Replication Statistics menu. 4. Once Replication Status is INSYNC, stop the replication. 15 Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
5. Modify target container on target DR management console and Enable CIFS share path 6. Add target DR to the same domain as NetVault Server, add target DR into Active Directory Domain (Optional: only applies when both DR and NVBU server are in Active Directory Domain environment). 16 Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
2.3 Restore from Replication Target 1. Launch NVBU Console, go to Device Management, Remove the source VTL. 2. Modify C:\Program Files (x86)\Quest Software\NetVault Backup\config\diskdevices.cfg, change the following locations to point to target DR IP or hostname. Save diskdevices.cfg after the modification is completed. [libraries] location=\\10.250.243.18\nvbu1\NewLibrary [drives] location=\\10.250.243.18\nvbu1\NewLibrary\drives\1 location=\\10.250.243.18\nvbu1\NewLibrary\drives\2 17 Setting Up Rep
3. In NVBU Device Management menu, click Add - > Auto-Configure Device 4. NVBU will detect the target library with Re-scan for devices 18 Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
5. The target container device show as Online in Device Management UI 6. From NVBU Console, click Restore. On Selections tab, choose data set that needs to be restored. 19 Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
7. On Source tab, choose the target library device. 8. Verify from NVBU Console - > Logs that restore from target container is completed successfully. 20 Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.
3 Set Up the DR Series Deduplication Appliance Cleaner The cleaner will run during idle time. If you workflow does not have a sufficient amount of idle time on a daily basis then you should consider scheduling the cleaner which will force it to run during that scheduled time. If necessary you can do the following procedure as described in the screenshot to force the cleaner to run. Once all the backup jobs are setup the DR Series Deduplication Appliance cleaner can be scheduled.
4 Monitoring Deduplication, Compression and Performance After backup jobs have completed, the DR Series Deduplication Appliance tracks capacity, storage savings and throughput on the DR Series Deduplication Appliance dashboard. This information is valuable in understanding the benefits the DR Series Deduplication Appliance. Note: Deduplication ratios increase over time; it is not uncommon to see a 2- 4x reduction (25- 50% total savings) on the initial backup.
A Appendix A.1 Authenticating to DR through CIFS There are two options for NVBU to authenticate to DR Series Deduplication Appliance through CIFS. DR joined into domain: Integrate NVBU Server and DR Series Deduplication Appliance with Active Directory a. Ensure the AD user has appropriate ACLs to the DR Series Deduplication Appliance Container share b. Set the NVBU service to run with this AD user 1. 2. a.
NOTE: Do this step only when no backups are currently running, as restarting the services causes backup jobs to fail. Double- click on the services one at a time. If you are using local workgroup account rather than the AD account, make sure that there is a “.\”in front of the user name. d. Click OK. e. After changes, choose Stop/Start to restart the services. 24 Setting Up Replication between Dell™ DR Series Deduplication Appliances with NetVault 9.