End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Tagline Note: See page 5 for template instructions. Delete this note from the final document.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog This document is for informational purposes only and may contain typographical errors and technical inaccuracies. The content is provided as is, without express or implied warranties of any kind. © 2012 Dell Inc. All rights reserved. Dell and its affiliates cannot be responsible for errors or omissions in typography or photography. Dell, the Dell logo, and PowerEdge are trademarks of Dell Inc.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Contents Introduction ........................................................................................................... 6 Scope ................................................................................................................... 6 Prerequisites ..........................................................................................................
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 24. Confirmation window. .................................................................................. 30 Figure 25. Administration Overview. .............................................................................. 31 Figure 26. All Software Updates. .................................................................................. 32 Figure 27. Synchronizing all software updates. .............................
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 61. Installation status window. ............................................................................ 60 .
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Introduction The Dell Business Client Updates Catalog automates the patch process of system updates for Dell Business Client System in a Microsoft ConfigMgr environment. The catalog files contain detailed information to determine which updates are required for Dell Business Client Systems and how to apply them.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Steps to deploy Dell updates in Config Manager 2012 using Dell Client Catalog 1. Download the Dell Client Catalog. 2. Import the Dell Client Catalog into SCUP. 3. Publish the updates to the update server. 4. Synchronize the software updates. 5. Deploy the updates to the target client systems. 6. Initiate Client Action. 7. Install the updates on target client systems. 8. View the Summary.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 1. Select an update to view its properties. 2. Catalog can be imported by Custom Catalog ( Providing the Catalog URL Path) or by manually downloading the SDP catalog. 3. Steps to import Custom Catalog by: a. Click Catalogs Workspace – located on the bottom left panel.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 2. My software updates catalogs screen. b. Click Add. c. In the Add Software Update Catalog Wizard, under Catalog path, specify the Catalog Path as: ftp://ftp.dell.com/catalog/DellSDPCatalogPC.cab Use the Publisher name Dell.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 3. Specifying the catalog path. d. Click OK.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 4. Viewing your custom catalog. e. Select the added custom catalog and right-click and select Import to import the Dell client catalog.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 5. f. Importing the Dell catalog.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 6. Select an import type. g. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 7. Confirming the settings. h. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 8. Progress screen. Importing the Dell catalog to SCUP.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 9. Confirm the wizard completed successfully. 4. To manually import the DellSDPCatalog, select the Import Type option.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 10. Selecting an import type. 5. In the Software Updates Catalog Wizard, to select the SDP Catalog cab file, click Browse.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 11. Selecting a catalog.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 12. Specify the catalog path. 6. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 13. Confirming the settings. 7. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 14. Viewing the Security Warning. When you import the Dell Catalog into SCUP for the first time, a Security Warning message prompts you to accept the Dell Catalog. 8. For no further prompts to occur, click Always accept content from “Dell Inc.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 15. Progress window. 9. View the Catalog importing updates to SCUP.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 16. Confirmation window. 10. To finish the Import Software Update Catalog Wizard, click Close.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Publishing Dell updates from SCUP 2011 to the Update Server Under the Console Tree, the Dell group now appears with three subcategories: BIOS, Drivers and Applications, and Firmware. Browse the categories to select individual updates to publish. Figure 17. Viewing the Dell group. Note: At a minimum, publish the Dell OpenManage Inventory Agent (DSIA) located in the Dell Drivers and Applications section.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 18. Selecting Drivers and Applications. 1. Select Drivers and Applications. Figure 19. Selecting the Dell OpenManage Inventory Agent.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog 2. Select Dell OpenManage Inventory Agent (DSIA) for Dell Business Client Systems Update. Figure 20. Selecting Publish. 3. Select Publish.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 21. Specifying publish options. 4. Specify the publish option.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 22. Selecting Full Content. 5. Click Full Content and click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 23. Confirming settings. 6. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 24. Confirmation window. The Dell OpenManage Inventory (For Dell Client Business Client Systems) update published successfully. 7. To finish the Publish Software Updates Wizard, click Close. Deploying updates using SCCM 2012 Once the update publishes in SCUP, then open the System Center 2012 Configuration Manager Console and do synchronization. 1. Go to Start menu > All Programs. 2.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 25. Administration Overview.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 26. All Software Updates. By Default, no updates are listed under the All Software Updates because synchronization has not yet occurred.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Synchronizing software updates Figure 27. Synchronizing all software updates. 1. In Config Manager Console, click Synchronize Software Updates.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 28. Running synchronization. 2. When the Configuration Manager dialog box appears, click Yes. 3. Once synchronization completes, navigate to All Software Updates, right-click and refresh. Updates published by SCUP display in the SCCM console as shown below. Figure 29. Viewing published updates.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Deploying updates to target client systems 1. Select the Dell OpenManage Inventory Agent (DSIA) update and then click Deploy. Figure 30. Selecting Dell OpenManage Inventory Agent. 2. In the Deploy Software Updates Wizard, type a description and then browse to select the Collections.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 31. Specifying general information for this deployment.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 32. Selecting Device Collection. 3. Select the Device Collection.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 33. Specifying deployment information. 4. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 34. Specifying deployment settings. 5. Select a Deployment type from the Type of deployment drop-down list. The options are: Required (Mandatory) or Available (Optional). 6. To configure scheduling when the deployment is available to be installed on the client, click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 35. Configuring scheduling details for deployment. 7. Set the Installation Deadline. The installation deadline allows the required updates to install when the deadline is reached.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 36. Specifying the user experience. 8. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 37. Specifying the software update alert options. 9. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 38. Specifying download settings. 10. To select the deployment packages, click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 39. Specifying the package. 11. Create a new deployment package based on user requirements.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 40. Specifying the package to use. 12. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 41. Specifying the distribution point groups. 13. Add Distribution Points.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 42. Figure 43. Add Distribution Points dialog box. Select the Distribution point Name check box. 14. Select the Distribution Point, and then click OK.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 44. Specifying the distribution points or point groups to host the content. 15. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 45. Specifying the software update source location. 16. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 46. Specifying update languages. 17. Click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 47. Confirming the settings. 18. Confirm the settings and click Next.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 48. Viewing the completion status message. 19. Click Close. Use the above steps (Deploy updates to target Client Systems) to deploy other updates like BIOS, Application or Drivers on the target client Systems. Note: You can choose to deploy all updates at once, but make sure that you deploy DSIA first before you deploy the other updates.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 49. Viewing the Configuration Manager Properties file. 2. Select the Actions tab.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 50. Configuration Manager: Action tab.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 51. Selecting an action. 3. Select Machine Policy Retrieval & Evaluation Cycle and click Run Now. Figure 52. Review the message dialog box. 4. Click OK.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 53. Selecting another action. 5. Select Software Updates Deployment Evaluation Cycle and click Run Now. Figure 54. Review the message dialog box. 6. Click OK.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 55. Select another action. 7. Select Software Updates Evaluation Cycle and click Run Now. Figure 56. Review the message dialog box. 8. Click OK.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 57. Popup for software changes. Note: The information message only appears if the software update is applicable to this system. 9. To view the complete details of the update, go to Software Center and view. Figure 58. Viewing complete details in the Software Center. 10. To View the Update details, select View details.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Figure 59. Viewing installation status. Update Details display as shown in Figure 51. You can schedule the installation by clicking SCHEDULE. Figure 60. Selecting a software install option.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog 11. Click Install software now and then click OK. Figure 61. Installation status window. The software update installed successfully. DSIA (Dell OpenManage Inventory Agent) update installed successfully on the target client systems. Note: DSIA (Dell OpenManage Inventory Agent) does not require a system reboot.
End-to-End Deployment of Updates in SCCM 2012 Using Dell Business Client Catalog Additional resources Catalogs information in Dell TechCenter http://en.community.dell.com/techcenter/os-applications/w/wiki/dell-updates-catalogs.aspx Catalog Readme information ftp://ftp.dell.com/cmsdk/DellSDPCatalogPC_Readme.doc Client Catalog update location ftp://ftp.dell.com/catalog/DellSDPCatalogPC.
