Dell Chassis Management Controller Version 5.
Dell Chassis Management Controller The Dell Chassis Management Controller (CMC) is a hot-pluggable systems management hardware and software solution designed to provide the following functions for Dell PowerEdge M1000e chassis system: Remote management capabilities Power control Cooling control Version Dell Chassis Management Controller 5.22 Release Date April 2017 Previous Version Dell Chassis Management Controller Version 5.
What is Supported? Supported Web Browsers CMC version 5.22 is supported on the following Web browsers: Microsoft Internet Explorer 9 Microsoft Internet Explorer 10 Microsoft Internet Explorer 11 Microsoft EDGE Safari version 7.1 Safari version 8.0 Mozilla Firefox version 40 Mozilla Firefox version 41 Google Chrome version 49 Google Chrome version 50 What’s New Federal Information Processing Standards (FIPS) certified. Certification Number: #2861.
Release 5.13 Added a RACADM command to enable or disable CMC failover due to network link loss. To check CMC changeover state for network failure : racadm cmcchangeover --state To enable this flag : racadm cmcchangeover -e 1 To reset this flag : racadm cmcchangeover -e 0 Release 5.12 Quick link to the Dell Tech Center page from the CMC web GUI. Release 5.10 Firmware and driver refresh of COMMs cards on Dell's 13th generation of PowerEdge servers.
Fixed an issue with Server/Host OS network port off, which occurs after CMC is reset on full-height Modular platforms, when the second network daughter card is not installed. Fixed an issue causing the CMC web GUI to become unresponsive while using Active Directory login with WinRM. Fixed an issue causing memory full condition when the internal log files are oversized. Fixed an issue causing non-display of some of the KVM-related information on the CMC web GUI. Release 5.
Known Issues Issue 1: Description XWKGY_Intel10G card shows Flex disabled address after racresetcfg of CMC in Network Device page and OS. Resolution Virtual reseat or Physical reseat of the server. Versions/Systems Affected All CMC versions including CMC 5.22 and PowerEdge servers with iDRAC7 or earlier. Issue 2: Description An error occurs while importing CMC configuration file using local racadm or remote racadm. Resolution This issue occurs when IPv6 is enabled or disabled from the configuration file.
Issue 3: Description When the M1000e chassis is power cycled, the Dell PowerEdge PS-M4110 may not turn on and the message "iDRAC Not Ready" is displayed. Resolution To turn on the server, reset CMC or virtually reseat the server. Versions/Systems Affected All CMC versions including CMC 5.22 Installation Prerequisites For information on pre-requisites, see the Dell PowerEdge M1000e Chassis Management Controller Firmware Version 5.20 User's Guide.
Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues see dell.com/contactdell.