Owner's Manual

ManualsBrandsDell ManualsSoftwareDell Chassis Management Controller Version 4.0

Chassis Management

Controller

Version 4.0

Readme

Summary of content (5 pages)

PAGE 1
Chassis Management Controller Version 4.
PAGE 2
What’s New These topics describe the new features. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Support for PowerEdge M620 and iDRAC7 servers. Save and restore chassis configuration. Improved SEL log. Broadcom 57810-k Dual Port 10GB Blade Network Daughter Card. Broadcom 57810-k Dual Port 10GB Blade Mezzanine Card. Intel I350 Quad Port 1GB Blade Mezzanine Card. Intel x520-k Dual Port 10GB Blade Network Daughter Card. Intel x520-k Dual Port 10GB Blade Mezzanine Card.
PAGE 3
Recommended Module Firmware Versions • iDRAC Firmware Version: - 3.30 for Dell PowerEdge M610, M610X, M710, M710HD, M910, M915 - 1.60 for Dell PowerEdge M600, M605, M805, M905 • iDRAC7 Firmware Version: - 1.00 for Dell PowerEdge M620 • Dell Lifecycle Controller Version: - 1.5 for Dell PowerEdge M610, M610X, M710, M710HD, M910, M915 - 2.0 for Dell PowerEdge M620 • BIOS Version: - 1.0.0 for Dell PowerEdge M620 - 6.0.7 for Dell PowerEdge M610, M610X, M710 - 5.0.0 for Dell PowerEdge M710HD - 2.4.
PAGE 4
• • Mozilla Firefox 6.0: Windows XP 32-bit SP3, Windows Vista x32 and x64 SP2, Windows 7 x32 and x64, Windows Server 2003 x32 and x64 SP2, Windows Server 2008 x32 and x64, Windows Server 2008 R2 x64. Mozilla Firefox 7.0: Windows XP 32-bit SP3, Windows Vista x32 and x64 SP2, Windows 7 x32 and x64, Windows Server 2003 x32 and x64 SP2, Windows Server 2008 x32 and x64, Windows Server 2008 R2 x64. Upgrade The Lifecycle Controller is a service available on each of the servers and is facilitated by iDRAC.
PAGE 5
• • • • While using the command "racadm config -f" with: - CMC 3.21 or later versions of the firmware, make sure that the Remote RACADM client version 6.3.0 or later is installed. - CMC with an earlier version of 3.21 firmware, make sure that the Remote RACADM client version earlier than 6.3.0 is installed. The Remote RACADM testfeature command (racadm -r testfeature ...) does not support the -d (debug) option.