RACADM Command Line Reference Guide Addendum for Carrier Grade Chassis Management Controller
Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. ____________________ Information in this publication is subject to change without notice. © 2012 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Overview This addendum provides the changes to the RACADM Command Line Interface for Carrier Grade CMC. The controller firmware Carrier Grade CMC for NEBS enabled chassis requires changes to the command line interface due to the use of DC input power. This document only provides the updated RACADM commands for DC input power operation. For all other commands, see the RACADM Command Line Reference Guide for iDRAC7 1.00.00 and CMC 4.1 available at support.dell.com/manuals.
Max Power Conservation Mode = No Server Performance Over Power Redundancy = No [Chassis Power Supply Status Table]
15 16 SLOT-15 SLOT-16 ON ON 140 W 125 W 5 5 N/A getsensorinfo Description Displays status for system sensors. To use this subcommand, you must have CMC Login User privilege.
RACADM Command Line Reference Guide Addendum for Carrier Grade CMC