Dell™ BH200 Bluetooth® 2.0 EDR Stereo Headset Owner’s Manual Model BH200 www.dell.com | support.dell.
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2007 Dell Inc. All rights reserved.
Contents CAUTION: Safety Instructions . 1 Introduction Product Controls and Features . . . . . . . . . . . . . 11 . . . . . . . . . . . . . . . . . . 12 . . . . . . . . . . . . . . . . . . . . . . . 13 LED Indicator Lights . Audio Tones 2 8 . . . . . . . . . . . . . . Getting Started Charging the Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 . . . . . . . . . . . . . . . . . . 16 Switching the Headset On or Off Wearing the Headset 14 www.dell.com | support.dell.
3 Using the Headset with Windows XP (Service Pack 2) Dell BH200 Bluetooth Profiles. Pairing with your Computer . . . . . . . . . . . . . . 17 . . . . . . . . . . . . . . 18 Using the Windows Bluetooth™ Setup Wizard . . . Using the Toshiba Bluetooth Application Software . Connecting with your Computer . . 18 24 . . . . . . . . . . . . 35 Using the Windows Bluetooth™ Setup Wizard Re-connecting . . . . . . . . . . . . . . . . . Listening to Music . . . . . . 35 35 . . . . . . . . . . . . . . . .
Using Widcomm Bluetooth Application 5.1 Using the Toshiba Bluetooth Application . 4 . . . . . . . . . . . . . . 46 47 Using the Headset with Windows Vista Dell BH200 Profiles . . . . . . . . . . . . . . . . . . . Pairing with your Computer . . . . . . . . . . . . . . . Connecting with your Computer . . . . . . . . . . . . Using the Widcomm Bluetooth Application . Using the Toshiba Bluetooth Application . . Re-connecting . . . . . . . . . . . . . . . . Listening to Music . 50 51 55 . . . . . .
5 Using Phone Mode Pairing the Headset with a Mobile Phone . Reconnecting the Headset . . . . . . . . Making a Call from the Mobile Phone . . . Voice Dialing through the Headset . . . . Last Number Redial . . . . . . . . . . . . Answering a Call . . . . . . . . . . . . . . Call Swap . . . . . . . . . . . . . . . . . Ending a Call . . . . . . . . . . . . . . . . Rejecting a Call . . . . . . . . . . . . . . Muting a Call . . . . . . . . . . . . . . . . Adjusting the Volume During a Call . . . . 6 . . . . .
A Appendix Specifications . . . . . . . . . . . . . . . . . . . . . . Certification and Safety Approvals/ General Information . . . . . . . . . . . . . . . . . . . Regulatory Statement (R&TTE) . . . . . . . . . . . Waste Electrical and Electronic Equipment (WEEE) Directive . . . . . . . . . . . . . . . . . . . . . . . www.dell.com | support.dell.com 79 80 . . 82 . .
CAUTION: Safety Instructions 8 • Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions • Avoid storage at temperatures below -10°C or above 70°C. • Avoid operating at temperatures below 0°C or above 50°C. • Do not expose the headset or any of its supplied parts to rain or other liquids. • Avoid storing or using at Relative Humidity levels below 10% or above 90%.
NOTE: As a guide to setting the volume level, check that you can still hear your own voice when speaking normally, while listening with the headset.
D:\Technical Documentation\Dell Headset\User Guide\4-75x475section1_intro.fm Introduction 1 Congratulations on your purchase of the Dell BH200 Bluetooth 2.0 EDR Stereo Headset. This headset allows you to communicate wirelessly through your computer or mobile phone using its built-in microphone and stereo earphones. NOTE: Any devices that you use with the Dell BH200 must support the same Bluetooth profiles as the Dell BH200.
echnical Documentation\Dell Headset\User Guide\4-75x475section1_intro.
echnical Documentation\Dell Headset\User Guide\4-75x475section1_intro.
echnical Documentation\Dell Headset\User Guide\4-75x475section1_intro.
echnical Documentation\Dell Headset\User Guide\4-75x475section2_prep.fm Getting Started 2 Charging the Headset Before using your headset, charge it using the USB cable. NOTE: USB cable is only used for headset charging. No data or audio is transferred. NOTE: Computer must be switched on to enable charging. 1 Plug the large end of the USB cable into a USB port on your computer. 2 Plug the small end of the USB cable into the USB charging port on your headset (see next image).
echnical Documentation\Dell Headset\User Guide\4-75x475section2_prep.fm NOTE: Charge the headset for approximately 3 hours. The Power LED is red when charging and changes to green when charging is complete. Switching the Headset On or Off To switch on: Press and hold the Multi-function key for 3 seconds until the Blue LED stays on ("DU"-"LO" tone will also sound). To switch off: Press and hold the Multi-function key for 3 seconds until the Blue LED goes off (single beep will also sound).
D:\Technical Documentation\Dell Headset\User Guide\4-75x475section2_prep.fm NOTE: The headset automatically switches off if no connection is established with another Bluetooth device within 10 minutes.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 3 Using the Headset with Windows XP (Service Pack 2) Dell BH200 Bluetooth Profiles Your Dell BH200 can be used as stereo headphones (Headset profile)or as a hands-free device (Hands-free profile) with your computer. • When used as stereo headphones, the audio quality is much higher, but the microphone is disabled. This is perfect for listening to music.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm • When used as a hands-free device, the audio quality is lower, but the microphone is enabled. This is more suitable for use with IP phone software, or recording your voice. Pairing with your Computer NOTE: Make sure multimedia software is closed when establishing a Bluetooth connection.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 2 In the window which appears, click Bluetooth > Bluetooth Setup Wizard. 3 The Bluetooth Setup Wizard appears. Before you continue, you need to make sure your headset is discoverable, as follows: With your headset turned off, press and hold the Multifunction key for 6 seconds until the Blue LED flashes quickly, which indicates that the headset is in pairing mode.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 4 Choose I want to find a specific Bluetooth device and configure how this computer will use its services, then click Next.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 5 After the search has finished, click the Dell BH200 icon, then click Next.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 6 When asked for a Bluetooth security code, type 0000 (FOUR ZEROS), then click Pair Now.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 7 Make sure Audio Sink is highlighted, then click Finish. NOTE: By default, the Dell BH200 is installed as stereo headphones. If you prefer to install the Dell BH200 as a hands-free device, check the checkbox beside Audio Sink, and then click Configure. In the window which appears, check Use connection for phone or dictation, then click OK.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm Using the Toshiba Bluetooth Application Software NOTE: For optimum performance with Dell BH200, download the A01 or later patch from http://support.dell.com if you are using Dell TM350 bluetooth module 1 Click Start > All Programs > Bluetooth > Bluetooth Settings. The Add New Connection Wizard will begin (If it does not appear, click New Connection).
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 2 Click Next.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 3 Highlight Dell BH200 and click Next.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 4 (Hands-free installation only) When asked for a Bluetooth Passkey (PIN), type 0000 (FOUR ZEROS), then click OK.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 5 (Hands-free installation only) Highlight Headset, then click Next.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 6 (Hands-free installation only) When asked to press the headset button, press the Multi-function key.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 7 (Hands-free installation only) Click Next. 8 (Hands-free installation only) Click Finish.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 9 (Stereo Headset only) When asked for a Bluetooth Passkey (PIN), enter 0000 (four zeros), then click OK.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 10 (Stereo Headset only) The Bluetooth Settings screen will appear again. Click Bluetooth > Options.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 11 (Stereo Headset only) Check the box beside AV Remote Control Service.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 12 (Stereo Headset only) Click OK. 13 Click Bluetooth > Exit.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm Connecting with your Computer Using the Windows Bluetooth™ Setup Wizard 1 Double-click the My Bluetooth Places icon on your desktop. 2 Right-click on the Dell BH200 icon and choose Connect Stereo Headphones or Connect Hands-free Headset with Microphone. For more information on the difference between these two modes, see "Dell BH200 Bluetooth Profiles" on page 17.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm Listening to Music NOTE: To listen to music through your Dell BH200, first make sure your device has been set up following the instructions in "Pairing with your Computer" on page 18. Once your headset has been paired with your computer and is connected as Stereo Headphones, open the audio or multimedia software of your choice and play music or listen to video sound.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm Bluetooth application settings to choose another multimedia application, e.g. the Toshiba Bluetooth application has a special tab just for this purpose. Using your Headset to Chat NOTE: To use your Dell BH200 with chat or VoIP software, first make sure your device has been set up following previous instructions, making sure to connect it as a Hands-free Headset with Microphone.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm Using SKYPE (Ver 2.5) Using Widcomm Bluetooth Application 5.0 NOTE: To find out which Widcomm Bluetooth Application Software version is being used, open My Bluetooth Places and click Help > About My Bluetooth Places. A pop-up window will display the software version. 1 Make sure the headset is already paired with your computer. 2 In SKYPE, go to Tools > Options > Sound Device.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 3 Set Audio In as Bluetooth Audio, Audio Out as Bluetooth Audio, and Ringing as Bluetooth Audio. 4 Click Save. 5 In My Bluetooth Places, right-click DELL BH200 and select Connect Hands-free Headset with Microphone.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 6 When a ring tone is heard from the headset, press the Multifunction key once to connect to the Headset service. NOTE: When making/receiving a SKYPE call, connect the call on your computer. NOTE: When ending a SKYPE call, hang up the call on your computer. Music is resumed automatically if you were listening to it previously. 7 To disconnect the Headset service, press the Multi-function key once.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 4 Make sure the Allow this program to use SKYPE radio box is checked (see following image). 5 In My Bluetooth Places, right-click select Connect Hands-free. DELL BH200 and NOTE: To listen to music while waiting for a VoIP call, right-click DELL BH200 in My Bluetooth Places, and select Connect Stereo Headphones.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 6 When receiving a SKYPE call, press the Multi-function key once to accept the call. NOTE: Music will be paused automatically when making/receiving a SKYPE call. NOTE: To end a SKYPE call, press the Multi-function key once. Music is resumed automatically if you were listening to it previously.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm Using the Toshiba Bluetooth Application NOTE: For optimum performance with Dell BH200, download the A01 or later patch from http://support.dell.com if you are using Dell TM350 bluetooth module Connected Service: Hands-free Service 1 Make sure the headset is already paired with your computer. 2 In SKYPE, make sure Tools > Options > Sound Device > Audio In, Audio Out and Ringing are set as Windows default device.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm Connected Service: Headset Service 1 Make sure the headset is already paired with your computer with the Headset service. 2 In SKYPE, make sure Tools > Options > Sound Device > Audio In, Audio Out and Ringing are set as Windows default device. 3 In Toshiba Bluetooth Application, right-click BH200_HS and select Connect.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm Using MSN (Windows Live Messenger 8.0) Using Widcomm Bluetooth Application 5.0 NOTE: To find out which Widcomm Bluetooth Application Software version is being used, open My Bluetooth Places and click Help > About My Bluetooth Places. A pop-up window will display the software version. 1 Make sure the headset is already paired with your computer.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm 7 To disconnect the Headset service, press the Multi-function key once. Using Widcomm Bluetooth Application 5.1 NOTE: To find out which Widcomm Bluetooth Application Software version is being used, open My Bluetooth Places and click Help > About My Bluetooth Places. A pop-up window will display the software version. 1 Make sure the headset is already paired with your computer.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm NOTE: Music will be paused automatically when making/receiving a Messenger call. NOTE: To end a Messenger call, hang up the call on your computer. Music is resumed automatically if you were listening to it previously. Using the Toshiba Bluetooth Application NOTE: For optimum performance with Dell BH200, download the A01 or later patch from http://support.dell.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm NOTE: When making/receiving a Messenger call, accept the call on your computer. NOTE: When ending a Messenger call, hang up the call on your computer. 6 To disconnect the HF service, right-click BH200_HF and select Disconnect. DELL Connected Service: Headset Service 1 Make sure the headset is already paired with your computer. 2 In Toshiba Bluetooth Application, right-click BH200_HS and select Connect.
echnical Documentation\Dell Headset\User Guide\4-75x475section3_computer.fm NOTE: When making/receiving a Messenger call, connect the call on your computer. NOTE: To end a Messenger call, hang up the call on your computer. 7 To disconnect the Headset service, press the Multi-function key once.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm Using the Headset with Windows Vista 4 Dell BH200 Profiles Your Dell BH200 can be used as stereo headphones (Headset profile)or as a hands-free device (Hands-free profile) with your computer. • When used as stereo headphones, the audio quality is much higher, but the microphone is disabled. This is perfect for listening to music.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm • When used as a hands-free device, the audio quality is lower, but the microphone is enabled. This is more suitable for use with IP phone software, or recording your voice. Pairing with your Computer NOTE: Make sure Multimedia software is closed when establishing a Bluetooth connection. 1 Right-click on Bluetooth icon Add a Bluetooth Device.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm 3 Choose My device is set up and ready to be found then click Next.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm 4 Highlight DELL BH200, then click Next.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm 5 Check Let me choose my own passkey, enter 0000 (FOUR ZEROS), then click Next.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm 6 Click Finish. Connecting with your Computer Using the Widcomm Bluetooth Application 1 Right-click on Bluetooth icon Show Bluetooth Devices.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm 2 Under the Audio tab, highlight either Bluetooth Stereo Audio or Bluetooth Hands-Free Audio, then click Connect (to disconnect, click Disconnect). 3 Click OK.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm NOTE: Bluetooth Stereo Audio provides stereo audio, which is perfect for listening to music. Bluetooth Hands-free Audio provides mono audio, which is more suitable for use with VoIP software. Using the Toshiba Bluetooth Application 1 Right-click on Bluetooth icon Show Bluetooth Devices.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm 2 Under the Devices tab, highlight DELL BH200, then click Properties.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm 3 Under the Services tab, check the Audio Sink and Remote Control checkboxes, then click OK 4 Click OK.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm Re-connecting When your headset is turned off and then on again, it is only necessary to press the Multi-function key once. This will reestablish the connection to either music or phone mode. Listening to Music NOTE: To listen to music through your Dell BH200, first make sure your device has been set up following the instructions in "Pairing with your Computer" on page 51.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm • Volume down – decreases volume NOTE: These functions are dependent on your Bluetooth adapter supporting the AVRCP profile, and your multimedia application supporting multimedia controls. You may have to go into the Bluetooth application settings to choose another multimedia application, e.g. the Toshiba Bluetooth application has a special tab just for this purpose.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm Using SKYPE (Ver 2.5) Using the Microsoft Bluetooth Device Application 1 Make sure the headset is already paired with your computer. 2 In SKYPE, go to Tools > Options > Sound Device. 3 Set Audio In as Bluetooth Audio Input Device, Audio Out as Bluetooth Hands-free Audio and Ringing as Bluetooth Hands-free Audio (see following image). 4 Click Save.
echnical Documentation\Dell Headset\User Guide\4-75x475section3b_computer.fm NOTE: When making/receiving a SKYPE call, connect the call on your computer. NOTE: To end a SKYPE call, hang up the call on your computer. Music is resumed automatically if you were listening to it peviously. Using MSN (Windows Live Messenger 8.0) Using the Microsoft Bluetooth Device Application 1 Make sure the headset is already paired with your computer. 2 In Messenger, go to Tools > Audio and Video Setting.
echnical Documentation\Dell Headset\User Guide\4-75x475section4_phone.fm Using Phone Mode 5 Pairing the Headset with a Mobile Phone Your Dell BH200 needs to be paired to your mobile phone before it can be used. NOTE: Pairing procedures differ from one mobile phone to another. Refer to your phone’s documentation for details on its particular method.
echnical Documentation\Dell Headset\User Guide\4-75x475section4_phone.fm 2 Use your phone’s menu to search for Bluetooth audio devices. The phone should indicate it has found the "Dell BH200" headset. Confirm that you want to pair your phone and headset together. If you are unsure how to go through the pairing process on your phone, please consult its user manual. 3 When asked for a pin key, enter: 0000 (four zeros). Your phone confirms when pairing has been successful.
echnical Documentation\Dell Headset\User Guide\4-75x475section4_phone.fm Making a Call from the Mobile Phone While your mobile phone is paired with your headset, you can use the phone to make calls in the same way as normal. The only difference is that the earphone and microphone functions of the headset are used instead of the phone’s. NOTE: When connected in either Phone or Music mode, the Bluetooth LED blinks slowly.
echnical Documentation\Dell Headset\User Guide\4-75x475section4_phone.fm Last Number Redial When the headset is connected to phone mode only, click the Back key once, and your phone will redial the last number that you called. NOTE: This function only works on Bluetooth phones that support the Hands-free profile Answering a Call When someone calls you, a ring tone sounds in your headset. To answer the call, press the Multi-function key.
echnical Documentation\Dell Headset\User Guide\4-75x475section4_phone.fm 1 Press and hold the Multi-function key for 1 second, to put the first caller on hold and answer the second call 2 When the second call has ended, the first caller is automatically taken off hold. NOTE: Press and hold the Multi-function key for 1 second if the first caller is not taken off hold automatically (depends on phone model). Ending a Call During a call, press the Multi-function key to hang up.
echnical Documentation\Dell Headset\User Guide\4-75x475section4_phone.fm Adjusting the Volume During a Call The headset offers 8 pre-set volume levels. • To increase the volume, press the Volume up key • To decrease the volume, press the Volume down key.
echnical Documentation\Dell Headset\User Guide\4-75x475section5_troubleshooting.fm Troubleshooting 6 Why can’t I hear any sound from my headset? • Check the headset volume level. • Make sure headset is paired. • Make sure devices are not out of range. Try moving devices closer together and, if necessary, re-connecting. • Make sure headset is switched on and sufficiently charged. • Make sure Multimedia software is closed when establishing the Bluetooth connection.
echnical Documentation\Dell Headset\User Guide\4-75x475section5_troubleshooting.fm 1 Double-click on the Volume icon in the Windows taskbar. 2 Click Options > Properties. 3 Make sure that Bluetooth High Quality Audio is chosen as the Mixer device, then click OK. For Windows Vista only: • 1 Right-click on the Volume icon in the Windows taskbar. 2 Choose Playback Devices. 3 Right-click on Headset Earphone. 4 Choose Set as Default Device. 5 Click OK.
echnical Documentation\Dell Headset\User Guide\4-75x475section5_troubleshooting.fm 4 Make sure that Volume Control is not muted, then click Options > Exit. For Windows Vista: 1 Left-click on the Volume icon in the Windows taskbar. 2 There is a button beneath the volume control for mute. If it has a red circle with a diagonal line through it, the volume is muted. Click on the button to remove the mute setting. • The Bluetooth antenna is inside the right side of the headset.
echnical Documentation\Dell Headset\User Guide\4-75x475section5_troubleshooting.fm • Check that the correct recording device is chosen in Windows. For Windows XP only: 1 Right-click on the Volume icon in the Windows taskbar. 2 Choose Adjust Audio Properties. 3 Click on the Audio tab 4 Change the Sound playback Default device to Bluetooth Audio and the Sound recording Default device to Bluetooth Audio. 5 Click OK. For Windows Vista only: 1 Right-click on the Volume icon in the Windows taskbar.
echnical Documentation\Dell Headset\User Guide\4-75x475section5_troubleshooting.fm Re-pair devices. Only certain features appear to work with my computer or mobile phone Some Bluetooth devices do not support all features, as they only support certain Bluetooth profiles. For example, a phone may support the headset profile, but not the hands-free profile. In this case, features such as Last Number Redial are not supported.
echnical Documentation\Dell Headset\User Guide\4-75x475section5_troubleshooting.fm 4 Click Properties again. 5 Select the Services tab and check the Remote Control check box, then click OK. For Windows XP (using Toshiba software) only: 1 Right-click on the Bluetooth icon in the Windows taskbar. 2 Select Option. 3 Check the AV Remote Control Service checkbox. 4 Click OK. Sound quality is poor • Make sure you are connected to the Bluetooth Stereo Audio service.
echnical Documentation\Dell Headset\User Guide\4-75x475section5_troubleshooting.fm • Close any unnecessary programs running on your computer. • Switch headset off and on again to re-establish the connection. • Devices with Bluetooth 1.1 and 1.2 modules may experience quality issues due to bandwidth restrictions. • Using several Bluetooth devices on the same computer can saturate the available bandwidth, causing poor performance. Try using only one. • Ensure the battery is fully charged.
echnical Documentation\Dell Headset\User Guide\4-75x475section5_troubleshooting.fm Headset is not behaving correctly, or buttons have stopped working You may need to reset your headset. Use a pin or similar object to press the reset button.
echnical Documentation\Dell Headset\User Guide\4-75x475section5_troubleshooting.fm Resetting the Headset If at any time the headset freezes, or fails to behave as it should, press the Reset button. Reset button NOTE: After resetting the headset, switch on the power and connect your devices again.
D:\Technical Documentation\Dell Headset\User Guide\4-75x475section7_appendix.fm Appendix Specifications Compatibility Bluetooth Ver. 1.1, 1.2 or 2.
echnical Documentation\Dell Headset\User Guide\4-75x475section7_appendix.fm Certification and Safety Approvals/ General Information This product is CE, FCC, BQB marked. Please note that this product uses radio frequency bands not available for use within some areas of the EU.
echnical Documentation\Dell Headset\User Guide\4-75x475section7_appendix.fm Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed.
echnical Documentation\Dell Headset\User Guide\4-75x475section7_appendix.fm Regulatory Statement (R&TTE) European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz. In France, the equipment must be restricted to the 2.44652.4835GHz frequency range and must be restricted to indoor use. Operation of this device is subjected to the following National regulations and may be prohibited to use if certain restriction should be applied.
umentation\Dell Headset\User Guide\4-75x475section7_appendix.fm 15.105 Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
echnical Documentation\Dell Headset\User Guide\4-75x475section7_appendix.fm Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
echnical Documentation\Dell Headset\User Guide\newWEEE.fm Waste Electrical and Electronic Equipment (WEEE) Directive In the European Union, this label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. For information on how to recycle this product responsibly in your country, please visit: www.euro.dell.com/recycling.
echnical Documentation\Dell Headset\User Guide\newWEEE.fm Direktiv for bortskaffelse af elektrisk og elektronisk udstyr (WEEE) I den Europæiske Union indikerer denne etiket, at dette produkt ikke bør kasseres sammen med husholdningsaffald. Det bør bortskaffes ved en egnet facilitet for at muliggøre genbrug. For information om hvordan dette produkt genbruges ansvarligt i dit land, bedes du gå til: www.euro.dell.com/recycling.
echnical Documentation\Dell Headset\User Guide\newWEEE.fm Direktiivi sähkö- ja elektroniikkalaiteromusta (WEEE) Euroopan unionissa tämä tarra tarkoittaa, että tuotetta ei tule hävittää kotitalousjätteen joukossa. Se tulee toimittaa asianmukaiseen paikkaan uudelleenkäyttöä tai kierrätystä varten. Lisätietoa siitä, miten tuotteen kierrätys on järjestetty kotimaassasi, saat osoitteesta: www.euro.dell.com/recycling.
echnical Documentation\Dell Headset\User Guide\newWEEE.fm Οδηγία σχετικά µε τα απόβλητα ειδών ηλεκτρικού και ηλεκτρονικού εξοπλισµού (ΑΗΗΕ) Στην Ευρωπαϊκή Ένωση, αυτή η ετικέτα υποδεικνύει ότι αυτό το προϊόν δεν πρέπει να απορρίπτεται µαζί µε τα οικιακά απορρίµµατα. Θα πρέπει να αποκοµίζεται σε κατάλληλο χώρο ώστε να είναι δυνατή η ανάκτηση και η ανακύκλωση. Για πληροφορίες σχετικά µε την υπεύθυνη ανακύκλωση αυτού του προϊόντος στη χώρα σας, επισκεφθείτε τη διεύθυνση: www.euro.dell.com/recycling.
echnical Documentation\Dell Headset\User Guide\newWEEE.fm Direttiva Rifiuti di apparecchiature elettriche ed elettroniche (RAEE) Nell'Unione Europea, questa etichetta indica che questo prodotto non deve essere smaltito insieme ai rifiuti domestici. Deve essere depositato in un impianto adeguato che sia in grado di eseguire operazioni di recupero e riciclaggio. Per informazioni sulle procedure di riciclaggio responsabile di questo prodotto nel proprio Paese, visitare: www.euro.dell.com/recycling.
echnical Documentation\Dell Headset\User Guide\newWEEE.fm Directiva sobre equipamentos eléctricos e electrónicos a serem descartados (WEEE) Na União Europeia, esta etiqueta indica que esse produto não deve ser eliminado juntamente com o lixo normal. Deve ser depositado numa instalação apropriada para recolha e reciclagem. Para obter informações sobre como reciclar este produto de forma responsável no seu país, visite: www.euro.dell.com/recycling.
echnical Documentation\Dell Headset\User Guide\newWEEE.fm Directiva sobre el deshecho de material eléctrico y electrónico (WEEE) En la Unión Europea, esta etiqueta indica que la eliminación de este producto no se puede hacer junto con el deshecho doméstico. Se debe depositar en una instalación apropiada que facilite la recuperación y el reciclado. Para obtener más información sobre cómo reciclar este producto de manera responsable en su país, visite el sitio web: www.euro.dell.com/recycling.
echnical Documentation\Dell Headset\User Guide\newWEEE.fm Direktiv för kassering av elektrisk och elektronisk utrustning (WEEE) Inom EU betyder den här etiketten att produkten inte får slängas i hushållsavfallet. Den ska lämnas in på en återvinningsstation. Information om hur produkten återvinns i ditt land finns på adressen www.euro.dell.com/recycling.
cumentation\Dell Headset\User Guide\newWEEE.