Dell™ BH200 Bluetooth® 2.0 EDR Stereo Headset Owner’s Manual Model BH200 w w w. d e l l . c o m | s u p p o r t . d e l l .
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2007 Dell Inc. All rights reserved.
Inhalt ACHTUNG: Sicherheitshinweise 1 Einleitung Bedienelemente und Funktionen . . . . . . . . . . . . 11 . . . . . . . . . . . . . . . . . . . . . . 12 . . . . . . . . . . . . . . . . . . . . . . . 13 LED-Anzeigen Signaltöne . 2 8 . . . . . . . . . . . . . Erste Schritte Headset aufladen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 . . . . . . . . . . . . . . . . . . . . . 16 Headset ein- und ausschalten Headset tragen 14 www.dell.com | support.dell.
3 Headset mit Windows XP (Service Pack 2) verwenden Dell BH200 Bluetooth-Profile . . . . . . . . . . . . . . Mit einem Computer koppeln . . . . . . . . . . . . . . 17 18 Windows Bluetooth™-Einrichtungsassistent verwenden 18 Toshiba Bluetooth Application-Software verwenden . . 23 Mit einem Computer verbinden . . . . . . . . . . . . . 34 Windows Bluetooth™-Einrichtungsassistent verwenden 34 Erneut verbinden . . . . . . . . . . . . . . . . . . . . . 34 Musik hören . . . . . . . . . . . . . . . . . .
Widcomm Bluetooth Application 5.1 verwenden Toshiba Bluetooth Application verwenden . . . 4 . . . . . . . . 45 47 Headset mit Windows Vista verwenden Dell BH200-Profile . . . . . . . . . . . . . . . . . . . . Mit einem Computer koppeln . . . . . . . . . . . . . . Mit einem Computer verbinden . . . . . . . . . . . . . Widcomm Bluetooth Application verwenden . Toshiba Bluetooth Application verwenden . . Erneut verbinden . . . . . . . . . . . . . . . . Musik hören 50 51 55 . . . . . 55 57 60 . .
5 Telefonmodus verwenden Headset mit einem Mobiltelefon koppeln . . . . . . Headset erneut verbinden . . . . . . . . . . . . . . Mit dem Mobiltelefon anrufen . . . . . . . . . . . . Sprachwahl über das Headset . . . . . . . . . . . Wahlwiederholung der zuletzt gewählten Nummer . Anruf annehmen . . . . . . . . . . . . . . . . . . . Makeln . . . . . . . . . . . . . . . . . . . . . . . . Gespräch beenden. . . . . . . . . . . . . . . . . . Anruf abweisen . . . . . . . . . . . . . . . . . . .
A Appendix Specifications . . . . . . . . . . . . . . . . . . . . . . Certification and Safety Approvals/ General Information . . . . . . . . . . . . . . . . . . . Regulatory Statement (R&TTE) . . . . . . . . . . . Waste Electrical and Electronic Equipment (WEEE) Directive . . . . . . . . . . . . . . . . . . . . . . . www.dell.com | support.dell.com 79 80 . . 82 . .
ACHTUNG: Sicherheitshinweise 8 • Explosionsgefahr bei Austausch des Akkus gegen einen ungeeigneten Typ. Verbrauchte Akkus anweisungsgemäß entsorgen. • Vermeiden Sie eine Lagerung bei Temperaturen unter -10 °C und über 70 °C. • Vermeiden Sie Betrieb bei Temperaturen unter 0 °C und über 50 °C. • Setzen Sie das Headset und sämtliche mitgelieferten Teile niemals Regen oder anderen Flüssigkeiten aus. • Lagern und benutzen Sie das Gerät nicht bei einer relativen Luftfeuchte unter 10 % oder über 90 %.
• Benutzen Sie das Headset nicht beim Auto- oder Fahrradfahren und nicht in anderen Situationen, in denen Sie Umgebungsgeräusche hören sollten. • Um Hörschäden vorzubeugen, hören Sie nicht längere Zeit bei hoher Lautstärke. HINWEIS: Ein Anhaltspunkt zur Einstellung der Lautstärke: Wenn Sie mit normaler Lautstärke sprechen, sollten Sie Ihre eigene Stimme noch hören können, wenn Sie das Headset benutzen.
Einleitung 1 Wir gratulieren Ihnen zum Kauf unseres Dell BH200 Bluetooth 2.0 EDR-Stereoheadsets. Dieses Headset ermöglicht Ihnen mit seinem integrierten Mikrofon und Stereokopfhörern schnurlose Kommunikation über Ihren Computer oder ein Mobiltelefon. HINWEIS: Sämtliche Geräte, mit denen Sie das Dell BH200 benutzen möchten, müssen dieselben Bluetooth-Profile wie das Dell BH200 unterstützen.
Bedienelemente und Funktionen Leiser Betrieb-/ Bluetooth-LED Laden-/Akku-LED Rückwärts USB-Ladeanschluss Lauter Multifunktionstaste Vorwärts Mikrofon Rücksetztaste 11
LED-Anzeigen Modus LED-Anzeige Eingeschaltet (Bereitschaft) Betriebs-/Bluetooth-LED leuchtet blau Ausgeschaltet Betrieb-/Bluetooth-LED leuchtet nicht Koppeln Betrieb-/Bluetooth-LED blinkt blau (schnell) Mit Bluetooth-Gerät verbunden Betrieb-/Bluetooth-LED blinkt blau (langsam) Gerät wird geladen Laden-/Akku-LED leuchtet rot Voll geladen Laden-/Akku-LED leuchtet grün Energiestand niedrig Laden-/Akku-LED blinkt rot (langsam) 12
Signaltöne Headsetstatus Signaltöne Eingeschaltet "DO-LU"-Ton Ausgeschaltet Piepton Mikrofonstummschaltung Ein Piepton alle 2 Sekunden (im Kopfhörer) Ankommender Anruf Klingelton Energiestand niedrig Ein Piepton alle 20 Sekunden (im Kopfhörer) Sprachwahl wird gestartet Je nach Einstellung des Mobiltelefons Verbindung erfolgreich aufgebaut/getrennt "DO-LU"-Ton Reichweite überschritten Zwei "DO-LU"-Töne Lautstärke auf Minimum oder Maximum eingestellt Piepton Ende des Gespräches Piepton 13
Erste Schritte 2 Headset aufladen Bevor Sie Ihr Headset benutzen, laden Sie es über das USB-Kabel auf. HINWEIS: Das USB-Kabel wird nur zum Laden des Headsets benutzt. Daten oder Klänge werden darüber nicht übertragen. HINWEIS: Damit das Headset geladen werden kann, muss der Computer eingeschaltet sein. 1 Verbinden Sie den großen Stecker am USB-Kabel mit dem USB-Port Ihres Computers. 2 Verbinden Sie den kleinen Stecker des USB-Kabels mit dem USB-Ladeanschluss Ihres Headsets (siehe nächste Abbildung).
HINWEIS: Laden Sie das Headset etwa drei Stunden lang auf. Während das Gerät geladen wird, leuchtet die Betrieb-LED rot; sie färbt sich grün, wenn das Gerät komplett geladen ist. Headset ein- und ausschalten Einschalten: Halten Sie die Multifunktionstaste 3 Sekunden lang gedrückt, bis die blaue LED dauerhaft leuchtet (dazu erklingt ein "DU"-"LO"-Ton). Ausschalten: Halten Sie die Multifunktionstaste 3 Sekunden lang gedrückt, bis die blaue LED erlischt (dazu erklingt ein einzelner Piepton).
HINWEIS: Das Headset schaltet sich automatisch aus, wenn innerhalb von 10 Minuten keine Verbindung mit einem anderen Bluetooth-Gerät hergestellt wird.
3 Headset mit Windows XP (Service Pack 2) verwenden Dell BH200 Bluetooth-Profile An Ihrem Computer können Sie Ihr Dell BH200 als Stereokopfhörer (Headset-Profil) oder als schnurloses Gerät (Hands Free-Profil) einsetzen. • Wenn Sie das Gerät als Stereokopfhörer benutzen, erreichen Sie eine erheblich bessere Tonqualität; das Mikrofon ist jedoch abgeschaltet. Ideal zum Hören von Musik.
Mit einem Computer koppeln HINWEIS: Sorgen Sie dafür, dass beim Aufbau einer BluetoothVerbindung keine Multimedia-Software läuft. Windows Bluetooth™-Einrichtungsassistent verwenden So verbinden Sie Ihr Headset mit dem Computer: 1 Klicken Sie auf Start > (Alle) Programme > BluetoothUmgebung. HINWEIS: Vergewissern Sie sich, dass die Bluetooth-Funktionalität Ihres Computers aktiviert ist. 2 Im sich nun öffnenden Fenster klicken Sie auf Bluetooth > Bluetooth Setup Wizard.
3 Der Bluetooth Setup Wizard wird angezeigt. Bevor Sie fortfahren, müssen Sie sich vergewissern, dass Ihr Headset erkannt werden kann: Halten Sie die Multifunktionstaste bei ausgeschaltetem Headset 6 Sekunden lang gedrückt, bis die blaue LED zu blinken beginnt; dies bedeutet, dass sich das Headset im Kopplungsmodus befindet. 4 Wählen Sie I want to find a specific Bluetooth device and configure how this computer will use its services, klicken Sie dann auf Weiter.
5 Nach dem Abschluss der Suche klicken Sie auf das Symbol Dell BH200, anschließend klicken Sie auf Weiter.
6 Wenn Sie nach einem Bluetooth security code gefragt werden, geben Sie 0000 (VIER NULLEN) ein, anschließend klicken Sie auf Pair Now.
7 Vergewissern Sie sich, dass Audio Sink markiert ist, anschließend klicken Sie auf Fertig stellen. HINWEIS: Standardmäßig wird Ihr Dell BH200 als Stereokopfhörer installiert. Wenn Sie Ihr Dell BH200 lieber als Hands Free-Gerät installieren möchten, markieren Sie das Ankreuzfeld neben Audio Sink und klicken anschließend auf Configure. Im sich nun öffnenden Fenster markieren Sie Use connection for phone or dictation, anschließend klicken Sie auf OK.
Toshiba Bluetooth Application-Software verwenden HINWEIS: Um optimale Ergebnisse Ihres Dell BH200 in Kombination mit einem Dell TM350-Bluetooth-Modul zu erzielen, laden Sie den Patch A01 oder eine aktuellere Version unter http://support.dell.com herunter. 1 Klicken Sie auf Start > (Alle) Programme > Bluetooth > Bluetooth-Einstellungen. Der Add New Connection Wizard wird gestartet (falls nicht, klicken Sie auf New Connection).
2 Klicken Sie auf Weiter.
3 Markieren Sie Dell BH200 und klicken Sie auf Weiter.
4 (Nur bei Hands Free-Installation:) Wenn Sie nach einem Bluetooth Passkey (PIN) gefragt werden, geben Sie 0000 (VIER NULLEN) ein, anschließend klicken Sie auf OK.
5 (Nur bei Hands Free-Installation:) Markieren Sie Headset, klicken Sie dann auf Weiter.
6 (Nur bei Hands Free-Installation:) Wenn Sie zum Drücken der Headsettaste aufgefordert werden, drücken Sie die Multifunktionstaste.
7 (Nur bei Hands Free-Installation:) Klicken Sie auf Weiter. 8 (Nur bei Hands Free-Installation:) Klicken Sie auf Fertig stellen.
9 (Nur bei Stereoheadset:) Wenn Sie nach einem BluetoothKennwort (PIN) gefragt werden, geben Sie 0000 (vier Nullen) ein, anschließend klicken Sie auf OK.
10 (Nur bei Stereoheadset:) Der BluetoothEinstellungsbildschirm wird erneut angezeigt. Klicken Sie auf Bluetooth > Optionen.
11 (Nur bei Stereoheadset:) Markieren Sie das Kästchen neben AV Remote Control Service.
12 (Nur bei Stereoheadset:) Klicken Sie auf OK. 13 Klicken Sie auf Bluetooth > Beenden.
Mit einem Computer verbinden Windows Bluetooth™-Einrichtungsassistent verwenden 1 Doppelklicken sie auf das Symbol Bluetooth-Umgebung auf dem Desktop. 2 Rechtsklicken Sie auf das Symbol Dell BH200 und wählen Sie Connect Stereo Headphones oder Connect Hands-free Headset with Microphone. Weitere Informationen zu den Unterschieden zwischen diesen beiden Modi finden Sie unter "Dell BH200 Bluetooth-Profile" auf Seite 17.
Musik hören HINWEIS: Um mit Ihrem Dell BH200 Musik hören zu können, müssen Sie sich zunächst vergewissern, dass Ihr Gerät wie unter "Mit einem Computer koppeln" auf Seite 18 beschrieben eingerichtet wurde. Nachdem Ihr Headset mit dem Computer gekoppelt und als Stereokopfhörer verbunden wurde, öffnen Sie die Audio- oder Multimedia-Software Ihrer Wahl und spielen Musik oder Videos ab.
HINWEIS: Diese Funktionen hängen davon ab, ob Ihr BluetoothAdapter das AVRCP-Profil und Ihre Multimedia-Anwendung die Multimedia-Steuerung unterstützt. Eventuell müssen Sie in den Bluetooth-Anwendungseinstellungen eine andere MultimediaAnwendung wählen; zum Beispiel verfügt die Toshiba BluetoothAnwendung über ein spezielles Register zu diesem Zweck.
SKYPE (Ver 2.5) verwenden Widcomm Bluetooth Application 5.0 verwenden HINWEIS: Um herauszufinden, welche Widcomm Bluetooth Application-Software installiert ist, öffnen Sie die BluetoothUmgebung und klicken auf Hilfe > About My Bluetooth Places. Die Softwareversion wird in einem Fenster angezeigt. 1 Vergewissern Sie sich, dass das Headset bereits mit Ihrem Computer gekoppelt ist. 2 In SKYPE wählen Sie Aktionen > Optionen > Audiogeräte.
3 Bei Aufnahme stellen Sie Bluetooth-Audio ein, bei Wiedergabe wählen Sie ebenfalls Bluetooth-Audio, und auch bei Klingeln stellen Sie Bluetooth-Audio ein. 4 Klicken Sie auf Speichern. 5 In der Bluetooth-Umgebung klicken Sie mit der rechten Maustaste auf DELL BH200 und wählen Connect Hands-free Headset with Microphone.
6 Wenn Sie einen Klingelton im Headset hören, drücken Sie zur Verbindung mit dem Headset-Service einmal die Multifunktionstaste. HINWEIS: Beim Tätigen oder Annehmen eines Skype-Anrufes bauen Sie den Anruf an Ihrem Computer auf. HINWEIS: Zum Beenden eines Skype-Anrufes legen Sie am Computer auf. Falls Sie zuvor Musik gehört haben, wird die Musikwiedergabe automatisch fortgesetzt. 7 Zum Trennen das Headset-Service drücken Sie die Multifunktionstaste einmal. Widcomm Bluetooth Application 5.
3 Wählen Sie Name: BTSTAC~1.EXE und klicken Sie auf Ändern. 4 Sorgen Sie dafür, dass das Kästchen Zugriff auf Skype erlaubt markiert ist (siehe folgende Abbildung). 5 In der Bluetooth-Umgebung klicken Sie mit der rechten Maustaste auf Hands-free.
HINWEIS: Um Musik zu hören, während sie auf einen VoIP-Anruf warten, klicken Sie mit der rechten Maustaste auf DELL BH200 in der Bluetooth-Umgebung und wählen Connect Stereo Headphones. 6 Wenn Sie einen Skype-Anruf empfangen, drücken Sie zum Annehmen des Anrufes die Multifunktionstaste einmal. HINWEIS: Bei abgehenden oder ankommenden Skype-Anrufen wird die Musik automatisch angehalten. HINWEIS: Zum Beenden des Skype-Anrufes drücken Sie die Multifunktionstaste einmal.
Toshiba Bluetooth Application verwenden HINWEIS: Um optimale Ergebnisse Ihres Dell BH200 in Kombination mit einem Dell TM350-Bluetooth-Modul zu erzielen, laden Sie den Patch A01 oder eine aktuellere Version unter http://support.dell.com herunter. Verbundener Service: Hands Free-Service 1 Vergewissern Sie sich, dass das Headset bereits mit Ihrem Computer gekoppelt ist.
Verbundener Service: Headset-Service 1 Vergewissern Sie sich, dass das Headset bereits mit Ihrem Computer gekoppelt und mit demHeadset-Service verbunden ist. 2 In Skype vergewissern Sie sich, dass unter Aktionen > Optionen > Audiogeräte > Aufnahme, Wiedergabe und Klingeln jeweils das Windows Standard-Audiogerät ausgewählt ist. 3 In der Toshiba Bluetooth Application klicken Sie mit der rechten Maustaste auf DELL BH200_HS und wählen Verbinden.
MSN (Windows Live Messenger 8.0) verwenden Widcomm Bluetooth Application 5.0 verwenden HINWEIS: Um herauszufinden, welche Widcomm Bluetooth Application-Software installiert ist, öffnen Sie die BluetoothUmgebung und klicken auf Hilfe > About My Bluetooth Places. Die Softwareversion wird in einem Fenster angezeigt. 1 Vergewissern Sie sich, dass das Headset bereits mit Ihrem Computer gekoppelt ist.
HINWEIS: Beim Tätigen oder Annehmen eines Messenger-Anrufes bauen Sie den Anruf an Ihrem Computer auf. HINWEIS: Zum Beenden eines Messenger-Anrufes legen Sie am Computer auf. 7 Zum Trennen das Headset-Service drücken Sie die Multifunktionstaste einmal. Widcomm Bluetooth Application 5.1 verwenden HINWEIS: Um herauszufinden, welche Widcomm Bluetooth Application-Software installiert ist, öffnen Sie die BluetoothUmgebung und klicken auf Hilfe > About My Bluetooth Places.
HINWEIS: Um Musik zu hören, während sie auf einen VoIP-Anruf warten, klicken Sie mit der rechten Maustaste auf DELL BH200 in der Bluetooth-Umgebung und wählen Connect Audio Sink. 3 Im Messenger rufen Sie Extras > Audio- und Video-Setup auf. 4 In Schritt 1: Bei "Speaker Setup" wählen Sie BluetoothAudio. 5 In Schritt 2: Bei "Microphone Setup" wählen Sie BluetoothAudio. HINWEIS: Beim Tätigen oder Annehmen eines Messenger-Anrufes bauen Sie den Anruf an Ihrem Computer auf.
Toshiba Bluetooth Application verwenden HINWEIS: Um optimale Ergebnisse Ihres Dell BH200 in Kombination mit einem Dell TM350-Bluetooth-Modul zu erzielen, laden Sie den Patch A01 oder eine aktuellere Version unter http://support.dell.com herunter. Verbundener Service: Hands Free-Service 1 Vergewissern Sie sich, dass das Headset bereits mit Ihrem Computer gekoppelt ist. 2 In der Toshiba Bluetooth Application klicken Sie mit der rechten Maustaste auf DELL BH200_HF und wählen Verbinden.
HINWEIS: Zum Beenden eines Messenger-Anrufes legen Sie am Computer auf. 6 Zum Trennen des Hands Free-Service klicken Sie mit der rechten Maustaste auf DELL BH200_HF und wählen Trennen. Verbundener Service: Headset-Service 1 Vergewissern Sie sich, dass das Headset bereits mit Ihrem Computer gekoppelt ist. 2 In der Toshiba Bluetooth Application klicken Sie mit der rechten Maustaste auf DELL BH200_HS und wählen Verbinden.
6 In Schritt 2: Bei "Microphone Setup" wählen Sie Bluetooth Wave from Toshiba. HINWEIS: Beim Tätigen oder Annehmen eines Messenger-Anrufes bauen Sie den Anruf an Ihrem Computer auf. HINWEIS: Zum Beenden eines Messenger-Anrufes legen Sie am Computer auf. 7 Zum Trennen das Headset-Service drücken Sie die Multifunktionstaste einmal.
4 Headset mit Windows Vista verwenden Dell BH200-Profile An Ihrem Computer können Sie Ihr Dell BH200 als Stereokopfhörer (Headset-Profil) oder als schnurloses Gerät (Hands Free-Profil) einsetzen. • • 50 Wenn Sie das Gerät als Stereokopfhörer benutzen, erreichen Sie eine erheblich bessere Tonqualität; das Mikrofon ist jedoch abgeschaltet. Ideal zum Hören von Musik. Wenn Sie das Headset als schnurloses Gerät einsetzen, leidet die Tonqualität etwas, allerdings können Sie das Mikrofon benutzen.
Mit einem Computer koppeln HINWEIS: Sorgen Sie dafür, dass beim Aufbau einer BluetoothVerbindung keine Multimedia-Software läuft. 1 Rechtsklicken Sie auf das Bluetooth-Symbol (in der Taskleiste) und wählen Sie Bluetooth-Gerät hinzufügen. 2 Halten Sie die Multifunktionstaste bei ausgeschaltetem Headset 6 Sekunden lang gedrückt, bis die blaue Betrieb/Bluetooth-LED zu blinken beginnt; dies bedeutet, dass sich das Headset im Kopplungsmodus befindet.
3 Wählen Sie Gerät ist eingerichtet und kann erkannt werden, klicken Sie dann auf Weiter.
4 Markieren Sie Dell BH200 und klicken Sie auf Weiter.
5 Wählen Sie Eigenen Hauptschlüssel auswählen, geben Sie 0000 (vier Nullen) ein, klicken Sie dann auf Weiter.
6 Klicken Sie auf Fertig stellen. Mit einem Computer verbinden Widcomm Bluetooth Application verwenden 1 Rechtsklicken Sie auf das Bluetooth-Symbol (in der Taskleiste) und wählen Sie Bluetooth-Netzwerkgeräte anzeigen.
2 Im Register Audio markieren Sie entweder BluetoothStereoaudio oder Bluetooth-Hands Free-Audio, anschließend klicken Sie auf Verbinden (zum Trennen klicken Sie auf Trennen). 3 Klicken Sie auf OK.
HINWEIS: Bluetooth-Stereoaudio bietet Stereoklang, der sich ideal zum Musikhören eignet. Bluetooth-Hands Free-Audio bietet Monoklang, der sich eher zur Nutzung mit VoIP-Software eignet. Toshiba Bluetooth Application verwenden 1 Rechtsklicken Sie auf das Bluetooth-Symbol (in der Taskleiste) und wählen Sie Bluetooth-Netzwerkgeräte anzeigen.
2 Im Register Geräte markieren Sie DELL BH200, anschließend klicken Sie auf Eigenschaften.
3 Im Register Dienste markieren Sie die Kästchen Audio Sink und Remote Control, anschließend klicken Sie auf OK 4 Klicken Sie auf OK.
Erneut verbinden Wenn Sie Ihr Headset aus- und später wieder einschalten, müssen Sie lediglich einmal die Multifunktionstaste drücken. Dadurch wird die Verbindung im Musik- oder Telefonmodus wieder aufgebaut. Musik hören HINWEIS: Um mit Ihrem Dell BH200 Musik hören zu können, müssen Sie sich zunächst vergewissern, dass Ihr Gerät wie unter "Mit einem Computer koppeln" auf Seite 51 beschrieben eingerichtet wurde.
HINWEIS: Diese Funktionen hängen davon ab, ob Ihr BluetoothAdapter das AVRCP-Profil und Ihre Multimedia-Anwendung die Multimedia-Steuerung unterstützt. Eventuell müssen Sie in den Bluetooth-Anwendungseinstellungen eine andere MultimediaAnwendung wählen; zum Beispiel verfügt die Toshiba BluetoothAnwendung über ein spezielles Register zu diesem Zweck.
SKYPE (Ver 2.5) verwenden Microsoft Bluetooth Device Application verwenden 1 Vergewissern Sie sich, dass das Headset bereits mit Ihrem Computer gekoppelt ist. 2 In SKYPE wählen Sie Aktionen > Optionen > Audiogeräte. 3 Bei Aufnahme stellen Sie Bluetooth-Audioeingabegerät ein, bei Wiedergabe wählen Sie Bluetooth-Hands Free-Audio, bei Klingeln stellen Sie ebenfalls Bluetooth-Hands Free-Audio (siehe folgende Abbildung) ein. 4 Klicken Sie auf Speichern.
HINWEIS: Beim Tätigen oder Annehmen eines Skype-Anrufes bauen Sie den Anruf an Ihrem Computer auf. HINWEIS: Zum Beenden eines Skype-Anrufes legen Sie am Computer auf. Falls Sie zuvor Musik gehört haben, wird die Musikwiedergabe automatisch fortgesetzt. MSN (Windows Live Messenger 8.0) verwenden Microsoft Bluetooth Device Application verwenden 1 Vergewissern Sie sich, dass das Headset bereits mit Ihrem Computer gekoppelt ist. 2 Im Messenger rufen Sie Extras > Audio- und Video-Setup auf.
Telefonmodus verwenden 5 Headset mit einem Mobiltelefon koppeln Bevor Sie Ihr Dell BH200 mit einem Mobiltelefon benutzen können, müssen die beiden Geräte zunächst miteinander gekoppelt werden. HINWEIS: Der Kopplungsvorgang ist von Mobiltelefon zu Mobiltelefon unterschiedlich. Die exakte Vorgehensweise erfahren Sie in der Anleitung Ihres Telefons.
2 Suchen Sie über das Menü Ihres Telefons nach BluetoothAudiogeräten. Ihr Telefon sollte anzeigen, dass es das "Dell BH200"-Headset gefunden hat. Bestätigen Sie das Koppeln von Telefon und Headset. Falls Sie nicht genau wissen, wie der Kopplungsvorgang bei Ihrem Telefon abläuft, schauen Sie bitte in die Bedienungsanleitung. 3 Wenn Sie nach einem PIN-Code gefragt werden, geben Sie ein: 0000 (vier Nullen). Ihr Telefon bestätigt die erfolgreiche Kopplung.
Mit dem Mobiltelefon anrufen Wenn Ihr Mobiltelefon mit dem Headset gekoppelt ist, können Sie das Telefon ganz normal für Gespräche verwenden. Der einzige Unterschied besteht darin, dass statt Lautsprecher und Mikrofon des Telefons der Kopfhörer und das Mikrofon des Headsets genutzt werden. HINWEIS: Bei einer Verbindung im Telefon- oder Musikmodus blinkt die Bluetooth-LED langsam.
Wahlwiederholung der zuletzt gewählten Nummer Wenn Ihr Headset lediglich im Telefonmodus verbunden ist, drücken Sie einmal die Rückwärtstaste; Ihr Telefon wählt die zuletzt gewählte Nummer noch einmal. HINWEIS: Diese Funktion arbeitet nur mit Bluetooth-Telefonen, die das Hands Free-Profil unterstützen. Anruf annehmen Wenn Sie jemand anruft, hören Sie einen Klingelton im Headset. Zum Annehmen des Anrufs drücken Sie die Multifunktionstaste.
1 Halten Sie die Multifunktionstaste 1 Sekunde lang gedrückt, um den ersten Anruf zu halten und den zweiten Anruf anzunehmen. 2 Wenn das zweite Gespräch beendet ist, wird automatisch wieder zum ersten Gespräch umgeschaltet. HINWEIS: Falls das erste Gespräch nicht automatisch wieder angenommen werden sollte (je nach Telefonmodell), halten Sie die Multifunktionstaste 1 Sekunde lang gedrückt. Gespräch beenden Zum Auflegen drücken Sie die Multifunktionstaste.
Mikrofon stummschalten Drücken Sie im Gespräch die Rückwärtstaste. Das Mikrofon wird stummgeschaltet. Zum Aufheben der Stummschaltung drücken Sie die Rückwärtstaste noch einmal. Lautstärke im Gespräch einstellen Ihr Headset bietet Ihnen 8 vordefinierte Lautstärkestufen. • Zum Erhöhen der Lautstärke drücken Sie die Lauter-Taste. • Zum Vermindern der Lautstärke drücken Sie die Leiser-Taste.
Problemlösung 6 Warum höre ich nichts aus meinem Headset? • • • • • • 70 Überprüfen Sie die Lautstärkeeinstellung des Headsets. Überzeugen Sie sich davon, dass das Headset richtig gekoppelt ist. Vergewissern Sie sich, dass sich die beiden Geräte nicht außer Reichweite befinden. Nähern Sie die beiden Geräte einander, stellen Sie (wenn nötig) die Verbindung erneut her. Vergewissern Sie sich, dass das Headset eingeschaltet und ausreichend aufgeladen ist.
Nur Windows XP: 1 Doppelklicken Sie auf das Lautstärkesymbol in der Windows-Taskleiste. 2 Klicken Sie auf Optionen > Eigenschaften. 3 Vergewissern Sie sich, dass Hochwertiges BluetoothAudio als Mixergerät ausgewählt ist, klicken Sie dann auf OK. Nur Windows Vista: 1 2 3 4 5 • Rechtsklicken Sie auf das Lautstärkesymbol in der Windows-Taskleiste. Wählen Sie Wiedergabegeräte. Rechtsklicken Sie auf Headset-Kopfhörer. Wählen Sie Als Standardgerät verwenden. Klicken Sie auf OK.
2 3 Klicken Sie auf Optionen > Eigenschaften. Vergewissern Sie sich, dass Hochwertiges BluetoothAudio als Mixergerät ausgewählt ist, klicken Sie dann auf OK. 4 Überzeugen Sie sich davon, dass die Lautstärke nicht stummgeschaltet ist (kein Häkchen bei "Ton aus"), klicken Sie dann auf Optionen > Beenden. Unter Windows Vista: 1 2 • 72 Klicken Sie auf das Lautstärkesymbol in der WindowsTaskleiste. Unterhalb der Lautstärkesteuerung befindet sich eine Schaltfläche zum Stummschalten des Tons.
• Ihr Bluetooth-Adapter verfügt nicht über die zur Tonübertragung erforderlichen Bluetooth-Profile (A2DP, Handset und Hands Free). Unter Vista muss ein Treiber installiert werden, um die erforderlichen Bluetooth-Profile zur Audioübertragung zur Verfügung zu stellen. Andernfalls wird Bluetooth nicht als Mixergerät aufgelistet, Vista fordert Sie eventuell nach dem Koppeln des BH200 zur Installation zusätzlicher Treiber auf.
5 Klicken Sie auf OK. Nur Windows Vista: 1 2 3 4 5 Rechtsklicken Sie auf das Lautstärkesymbol in der Windows-Taskleiste. Wählen Sie Aufnahmegeräte. Rechtsklicken Sie auf Headset-Mikrofon. Wählen Sie Als Standardgerät verwenden. Klicken Sie auf OK. Das Headset scheint nicht gekoppelt zu sein. Eventuell wurde die Kopplung gelöscht. Koppeln Sie die Geräte erneut. In Verbindung mit meinem Computer oder Mobiltelefon können nicht alle Funktionen genutzt werden.
Stereo-Musikwiedergabe funktioniert, die Bedientasten jedoch nicht. Stereo-Musik wird über das A2DP-Profil übertragen. Die Bedientasten allerdings nutzen das AVRCP-Profil (Fernsteuerung). Vergewissern Sie sich, dass Ihr Gerät das AVRCP-Profil unterstützt. Wenn ja, koppeln und verbinden Sie das Gerät erneut über den Bluetooth Stereo Audio-Service. Nur Windows Vista: 1 Doppelklicken Sie auf das Windows-Taskleiste.
2 Wählen Sie Optionen. 3 Setzen Sie ein Häkchen bei AV Remote Control Service. 4 Klicken Sie auf OK. Die Tonqualität ist schlecht. • Vergewissern Sie sich, dass Sie sich mit dem Bluetooth Stereo Audio-Service verbunden haben. Bei einer Verbindung mit einem anderen Bluetooth-Audioservice wird möglicherweise keine optimale Tonqualität erzielt. Weitere Details finden Sie in der Dokumentation Ihres Computers oder BluetoothGerätes.
• Wenn mehrere Bluetooth-Geräte gleichzeitig an einem Computer verwendet werden, kann die verfügbare Bandbreite ausgeschöpft sein, die Qualität leidet. Nutzen Sie probeweise nur jeweils ein Bluetooth-Gerät. • Vergewissern Sie sich, dass der Akku komplett geladen ist. Es treten Tonstörungen auf. Tonstörungen können auftreten, wenn sich Objekte zwischen Ihrem Headset und dem anderen Bluetooth-Gerät befinden. • Sorgen Sie dafür, dass die Strecke zwischen den beiden Geräten so frei wie möglich ist.
Headset zurücksetzen Falls Ihr Headset nicht mehr reagieren sollte oder sich anderweitig ungewöhnlich verhält, drücken Sie die Rücksetztaste. Rücksetztaste HINWEIS: Nach dem Zurücksetzen schalten Sie das Headset ein und verbinden es wieder mit Ihren Geräten.
Appendix Specifications Compatibility Bluetooth Ver. 1.1, 1.2 or 2.
Certification and Safety Approvals/ General Information This product is CE, FCC, BQB marked. Please note that this product uses radio frequency bands not available for use within some areas of the EU. This product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Users are not permitted to make changes or modify the device in any way.
Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards: • EN 300 328 V.1.6.1 (2003-04) • EN 301 489-1 V.1.4.
Regulatory Statement (R&TTE) European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz. In France, the equipment must be restricted to the 2.44652.4835GHz frequency range and must be restricted to indoor use. Operation of this device is subjected to the following National regulations and may be prohibited to use if certain restriction should be applied. This device complies with Part 15 of the FCC Rules.
15.105 Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
Waste Electrical and Electronic Equipment (WEEE) Directive In the European Union, this label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. For information on how to recycle this product responsibly in your country, please visit: www.euro.dell.com/recycling.
Direktiv for bortskaffelse af elektrisk og elektronisk udstyr (WEEE) I den Europæiske Union indikerer denne etiket, at dette produkt ikke bør kasseres sammen med husholdningsaffald. Det bør bortskaffes ved en egnet facilitet for at muliggøre genbrug. For information om hvordan dette produkt genbruges ansvarligt i dit land, bedes du gå til: www.euro.dell.com/recycling.
Direktiivi sähkö- ja elektroniikkalaiteromusta (WEEE) Euroopan unionissa tämä tarra tarkoittaa, että tuotetta ei tule hävittää kotitalousjätteen joukossa. Se tulee toimittaa asianmukaiseen paikkaan uudelleenkäyttöä tai kierrätystä varten. Lisätietoa siitä, miten tuotteen kierrätys on järjestetty kotimaassasi, saat osoitteesta: www.euro.dell.com/recycling.
Οδηγία σχετικά µε τα απόβλητα ειδών ηλεκτρικού και ηλεκτρονικού εξοπλισµού (ΑΗΗΕ) Στην Ευρωπαϊκή Ένωση, αυτή η ετικέτα υποδεικνύει ότι αυτό το προϊόν δεν πρέπει να απορρίπτεται µαζί µε τα οικιακά απορρίµµατα. Θα πρέπει να αποκοµίζεται σε κατάλληλο χώρο ώστε να είναι δυνατή η ανάκτηση και η ανακύκλωση. Για πληροφορίες σχετικά µε την υπεύθυνη ανακύκλωση αυτού του προϊόντος στη χώρα σας, επισκεφθείτε τη διεύθυνση: www.euro.dell.com/recycling.
Direttiva Rifiuti di apparecchiature elettriche ed elettroniche (RAEE) Nell'Unione Europea, questa etichetta indica che questo prodotto non deve essere smaltito insieme ai rifiuti domestici. Deve essere depositato in un impianto adeguato che sia in grado di eseguire operazioni di recupero e riciclaggio. Per informazioni sulle procedure di riciclaggio responsabile di questo prodotto nel proprio Paese, visitare: www.euro.dell.com/recycling.
Directiva sobre equipamentos eléctricos e electrónicos a serem descartados (WEEE) Na União Europeia, esta etiqueta indica que esse produto não deve ser eliminado juntamente com o lixo normal. Deve ser depositado numa instalação apropriada para recolha e reciclagem. Para obter informações sobre como reciclar este produto de forma responsável no seu país, visite: www.euro.dell.com/recycling.
Directiva sobre el deshecho de material eléctrico y electrónico (WEEE) En la Unión Europea, esta etiqueta indica que la eliminación de este producto no se puede hacer junto con el deshecho doméstico. Se debe depositar en una instalación apropiada que facilite la recuperación y el reciclado. Para obtener más información sobre cómo reciclar este producto de manera responsable en su país, visite el sitio web: www.euro.dell.com/recycling.
Direktiv för kassering av elektrisk och elektronisk utrustning (WEEE) Inom EU betyder den här etiketten att produkten inte får slängas i hushållsavfallet. Den ska lämnas in på en återvinningsstation. Information om hur produkten återvinns i ditt land finns på adressen www.euro.dell.com/recycling. Atık Elektrikli ve Elektronik Cihazlar (WEEE) Yönetmeliği Avrupa Birliği'nde bu etiket, ürünün ev elektroniği aletleri atıkları ile imha edilemeyeceğini gösterir.