Aurora R5 Setup and Specifications Computer Model: Alienware Aurora R5Alienware Aurora R5 Regulatory Model: D23M Regulatory Type: D23M001
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Set up your computer..........................................................................................................4 Create a USB recovery drive for Windows........................................................................6 Reinstall Windows using a USB recovery drive...................................................................................................... 6 Setting up the Virtual Reality (VR) headset — optional...................................................
Set up your computer 1 Connect the keyboard and mouse. NOTE: For setup instructions, see the documentation shipped with the keyboard and mouse. 2 Connect the network cable — optional. 3 Connect the display. NOTE: The DisplayPort on the back panel of your computer is covered. Connect the display to the discrete graphics card of your computer. NOTE: If you have two graphics cards, the card installed in PCI-Express X16 (graphics slot 1) is the primary graphics card.
4 Connect the power cable. 5 Press the power button.
Create a USB recovery drive for Windows Dell recommends that you create a recovery drive to troubleshoot and fix problems that may occur with Windows. An empty USB flash drive with a minimum capacity of 16 GB is required to create the recovery drive. NOTE: The following steps may vary depending on the version of Windows installed. Refer to the Microsoft support site for latest instructions. 1 Connect the USB flash drive to your computer. 2 In Windows search, type Recovery.
Setting up the Virtual Reality (VR) headset — optional NOTE: The VR headset is sold separately. 1 Download and run the setup tools for your VR headset at www.dell.com/VRsupport. 2 Connect the VR headset to the designated USB and HDMI ports on your computer, when prompted. NOTE: Connect the headset to the HDMI port on the primary graphics card and connect the display to any available port on the card. 3 Follow the instructions on the screen to complete the setup.
Views Front 1 USB 3.1 Gen 1 ports (2) Connect peripherals such as storage devices and printers. Provide data transfer speeds up to 5 Gbps. 2 Headphone port Connect a headphone or speakers. 3 Microphone port Connect an external microphone to provide sound input. 4 USB 3.1 Gen 1 ports with PowerShare (2) Connect peripherals such as storage devices and printers. Provides data transfer speeds up to 5 Gbps. PowerShare allows you to charge your USB devices even when your computer is turned off.
Back 1 Back panel Connect USB, audio, video, and other devices. 2 PCI-Express X16 (graphics slot 1) Connect a PCI-Express card such as graphics, audio, or network card to enhance the capabilities of your computer. For optimal graphics performance, use a PCI-Express X16 slot for connecting the graphics card. NOTE: The PCI-Express X16 slot works at X8 speed only. NOTE: If you have two graphics cards, the card installed in PCI-Express X16 (graphics slot 1) is the primary graphics card.
Connect a power cable to provide power to your computer. 9 Service Tag label The Service Tag is a unique alphanumeric identifier that enables Dell service technicians to identify the hardware components in your computer and access warranty information. 10 Side panel release latch Allows you to remove the side panel from your computer. 11 Security-cable slot (for Kensington locks) Connect a security cable to prevent unauthorized movement of your computer.
Connect the side-left and side-right speakers or surround sound speakers. In a 7.1 speaker channel setup, connect the side-left and side-right speakers. 8 Microphone port Connect an external microphone to provide sound input. 9 Front L/R surround line-out port Connect audio-output devices such as speakers and amplifiers. In a 7.1 speaker channel setup, connect the front-left and front-right speakers. 10 Line-in port Connect recording or playback devices such as a microphone or CD player.
Specifications Computer model Table 1. Computer model Computer model Alienware Aurora R5 Dimensions and weight Table 2. Dimensions and weight Height 472.5 mm (18.60 in) Width 212 mm (8.34 in) Depth 360.50 mm (14.19 in) Weight 14.62 kg (32.23 lb) NOTE: The weight of your computer varies depending on the configuration ordered and the manufacturing variability. System information Table 3.
Per slot 4 GB, 8 GB, and 16 GB Total memory 4 GB, 8 GB, 16 GB, 32 GB, and 64 GB (2400 MHz only) Intel Optane memory Intel Optane memory functions as a storage accelerator. It accelerates the system and any type of SATA-based storage media such as hard drives and solid-state drives (SSDs).
Front panel: Audio • Two USB 3.1 Gen 1 ports with PowerShare • • One audio output/headphone port (supports 2 channel audio) One audio input/microphone port Communications Table 9. Supported Communications Ethernet 10/100/1000 Mbps Killer E2400 Ethernet controller integrated on system board Wireless • • • 802.11b/g/n 802.11ac Bluetooth 4.1/Bluetooth 4.2 Wireless module Table 10.
Audio Table 12. Audio specifications Controller Realtek ALC3861 Type Integrated 7.1 channel audio with S/PDIF support Storage Table 13. Storage specifications Interface SATA 6 Gbps Externally accessible One 5.25-inch drive bay for DVD+/-RW drive, Blu-ray Disc combo (optional), or Blu-ray Disc writer (optional) Internally accessible Solid-state drive (SSD) One M.2 SATA drive NOTE: If you purchased an M.
Output current: 3.3V/17A, 5V/25A, 12VA/18A, 12VB/16A, 12VC/8A, 5Vaux/3A 3.3V/20A, 5V/20A, 12VA/32A, 12VB/48A, 12VD/16A, -12V/0.5A, 5Vaux/4A Rated output voltage: 3.3V, 5V, 12VA, 12VB, 12VC, 5Vaux 3.3V, 5V, 12VA, 12VB, 12VD, -12V, 5Vaux Computer environment Airborne contaminant level: G2 or lower as defined by ISA-S71.04-1985 Table 15.
Intel Optane memory Enabling Intel Optane memory 1 On the taskbar, click the search box, and then type Intel Rapid Storage Technology. 2 Click Intel Rapid Storage Technology. The Intel Rapid Storage Technology window is displayed. 3 On the Status tab, click Enable to enable the Intel Optane memory. 4 On the warning screen, select a compatible fast drive, and then click Yes to continue enabling Intel Optane memory. 5 Click Intel Optane memory → Reboot to complete enabling your Intel Optane memory.
Getting help and contacting Alienware Self-help resources You can get information and help on Alienware products and services using these online self-help resources: Table 16. Alienware products and online self-help resources Information about Alienware products and services www.alienware.com Troubleshooting information, user manuals, setup instructions, product specifications, technical help blogs, drivers, software updates, and so on www.alienware.
