AIMOpalis_bk0.book Page 1 Monday, October 24, 2011 10:16 AM Microsoft System Center Opalis Integration Pack for Dell Advanced Infrastructure Manager Version 1.
AIMOpalis_bk0.book Page 2 Monday, October 24, 2011 10:16 AM About Notes NOTE: A NOTE indicates important information that helps you make better use of your computer. ____________________ Information in this publication is subject to change without notice. © 2011 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
AIMOpalis_bk0.book Page 3 Monday, October 24, 2011 10:16 AM Contents 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . System Requirements . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . 8 Common Configuration Instructions for All Activities . . . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . . 11 Activity Properties General Tab . Properties Tab Filters Tab . . . . . . . . . . . . . . . . . .
AIMOpalis_bk0.book Page 4 Monday, October 24, 2011 10:16 AM Remove Persona Activity . . . . . . . . . . . . . . . . 34 Update Persona Activity . . . . . . . . . . . . . . . . . 35 Add Relationship Activity . . . . . . . . . . . . . . . . 41 Get Relationship Activity . . . . . . . . . . . . . . . . 42 . . . . . . . . . . . . . . 44 . . . . . . . . . . . . . . . . . 46 . . . . . . . . . . . . . . . . . . . . . . 49 . . . . . . . . . . . . . . . . . . . . . . .
AIMOpalis_bk0.book Page 5 Monday, October 24, 2011 10:16 AM Configuring the Run Operation Activity . 4 . . . . . . . . 65 Configuring the Start Activity . . . . . . . . . . . . . . 66 Configuring the Stop Activity . . . . . . . . . . . . . . 67 . . . . . . . . . . . . . . . . . . . . . . . . . 69 Workflow Workflow Requirements Importing Workflows . . . . . . . . . . . . . . 69 . . . . . . . . . . . . . . . . 69 AIM Connection Details . . . . . . . . . . . . . . 70 Proactive Failover .
AIMOpalis_bk0.
AIMOpalis_bk0.book Page 7 Monday, October 24, 2011 10:16 AM 1 Overview The Integration Pack for Dell Advanced Infrastructure Manager (AIM) is an add-on for Microsoft System Center Opalis that enables you to automate procedures and processes in the Dell AIM environment. With this integration pack, you can create workflows that interact with and transfer information to other System Center products such as Operations Manager.
AIMOpalis_bk0.book Page 8 Monday, October 24, 2011 10:16 AM 4 In the left pane of the Deployment Manager, expand Management Server, right-click Integration Packs, and then click Register IP with the Management Server. The Integration Pack Registration Wizard is displayed. Click Next. 5 In the Integration Pack or Hotfix Selection dialog box, click Add. Locate and select the IP_Opalis_Dell_AIM_1.0.oip file that you copied in step 1. Click Open. 6 Click Finish. The End User Agreement dialog box is displayed.
AIMOpalis_bk0.book Page 9 Monday, October 24, 2011 10:16 AM To set up a Dell AIM configuration: 1 In the Opalis Client, click the Options menu, and select Dell Advanced Infrastructure Manager. The Dell AIM Prerequisite Configuration dialog box is displayed. 2 On the Configurations tab, click Add to begin the configuration setup. The Add Configuration dialog box is displayed. 3 In the Name box, enter a name for the connection.
AIMOpalis_bk0.book Page 10 Monday, October 24, 2011 10:16 AM 4 Click the ellipsis button next to the Type box and select Dell AIM Object Type. 5 In the AIM Object Type box, select the type of Dell AIM object that you want to configure. 6 In the AIM Server Location box, type the name or IP Address of the Dell AIM computer. 7 In the AIM Server Port box, type the port used to access the Dell AIM Web Service.
AIMOpalis_bk0.book Page 11 Monday, October 24, 2011 10:16 AM In the activity properties dialog box, several tabs along the left side provide access to general and specific settings for the activity. Although the number of available tabs for activity properties differs from activity to activity, all activities have a General tab, a Properties tab and/or Filters tab, and a Run Behavior tab. General Tab This tab contains the Name and Description properties for the activity.
AIMOpalis_bk0.book Page 12 Monday, October 24, 2011 10:16 AM Is less than or equal to: the property of the object is less than or equal to the number specified in the filter. Is greater than or equal to: the property of the object is greater than or equal to the number specified in the filter. Contains: the property of the object contains the exact text specified in the filter. Unlike the Equals behavior, with Contains, other text can surround the matching text.
AIMOpalis_bk0.book Page 13 Monday, October 24, 2011 10:16 AM • Separate with _: Each item is separated by one or more characters. • Use CSV format: All items are in CSV (comma-separated value) format. This format is useful for importing data into spreadsheets or other applications. The activity will produce a new set of data every time it runs. The Flatten feature does not flatten data across multiple instances of the same activity. Returned Data Returned data is the foundation of a working runbook.
AIMOpalis_bk0.
AIMOpalis_bk0.book Page 15 Monday, October 24, 2011 10:16 AM Dell Integration Pack Activities 2 This integration pack adds the Dell AIM category to the Activity pane in the workflow authoring console.
AIMOpalis_bk0.book Page 16 Monday, October 24, 2011 10:16 AM The activity publishes all the data from the required and optional properties into returned data. Additional return data is generated based on the AIM Object Type that is associated with the Dell AIM Object Type configuration that you select when you define the activity. Table 2-1.
AIMOpalis_bk0.book Page 17 Monday, October 24, 2011 10:16 AM The following tables list the returned data this is commonly returned for this activity. Table 2-2. Common Get Object Returned Data Name Description Value Type AIM Object Type The type of Dell AIM object you can add String AIM Server Location The location of the Dell AIM server String AIM Server Port The port used to connect to the Dell AIM server Integer AIM Username The username used to connect to the Dell AIM server.
AIMOpalis_bk0.book Page 18 Monday, October 24, 2011 10:16 AM The following tables list the required properties and returned data for this activity. Table 2-3. Remove Object Required Properties Element Description Valid Values AIM Object Type The type of object whose Chassis maintenance mode you External want to remove Network Look up Yes Network Persona Server Pool Switch Tag VMRack VRack The ID of the object you String want to remove ID No Table 2-4.
AIMOpalis_bk0.book Page 19 Monday, October 24, 2011 10:16 AM Update Object Activity The Update Object activity is used in a policy to update existing objects in the Dell AIM environment, such as changing the Name of a Server Pool. For the procedure to configure this activity, see: Configuring the Update Object Activity. Optional properties are generated based on the AIM Object Type that is associated with the Dell AIM Object Type configuration that you select when you define the activity.
AIMOpalis_bk0.book Page 20 Monday, October 24, 2011 10:16 AM Table 2-6. Update Object Returned Data Name Description Value Type Use SSL Specifies whether or not the SSL protocol was used to connect to the Dell AIM server True or False Add Persona Activity The Add Persona activity is used in a policy to add a new persona to the Dell AIM environment. For the procedure to configure this activity, see, Configuring the Add Persona Activity.
AIMOpalis_bk0.book Page 21 Monday, October 24, 2011 10:16 AM Table 2-8.
AIMOpalis_bk0.book Page 22 Monday, October 24, 2011 10:16 AM Table 2-8.
AIMOpalis_bk0.book Page 23 Monday, October 24, 2011 10:16 AM Table 2-9.
AIMOpalis_bk0.book Page 24 Monday, October 24, 2011 10:16 AM Table 2-9.
AIMOpalis_bk0.book Page 25 Monday, October 24, 2011 10:16 AM Table 2-9.
AIMOpalis_bk0.book Page 26 Monday, October 24, 2011 10:16 AM Table 2-10. Get Persona Filters Element Description Filters Agent Exists If true, then an agent is Equals installed in the Does not equal persona.
AIMOpalis_bk0.book Page 27 Monday, October 24, 2011 10:16 AM Table 2-10.
AIMOpalis_bk0.book Page 28 Monday, October 24, 2011 10:16 AM Table 2-10.
AIMOpalis_bk0.book Page 29 Monday, October 24, 2011 10:16 AM Table 2-10.
AIMOpalis_bk0.book Page 30 Monday, October 24, 2011 10:16 AM Table 2-10.
AIMOpalis_bk0.book Page 31 Monday, October 24, 2011 10:16 AM Table 2-11. Get Persona Returned Data Name Description Value Type Agent Exists If true, then an agent is installed in the persona; otherwise false True or False AIM Object Type The type of Dell AIM object String that you can add AIM Server Location The location of the Dell AIM String server AIM Server Port The port used to connect to Integer the Dell AIM server AIM Username The username used to connect to the Dell AIM server.
AIMOpalis_bk0.book Page 32 Monday, October 24, 2011 10:16 AM Table 2-11.
AIMOpalis_bk0.book Page 33 Monday, October 24, 2011 10:16 AM Table 2-11.
AIMOpalis_bk0.book Page 34 Monday, October 24, 2011 10:16 AM Table 2-11.
AIMOpalis_bk0.book Page 35 Monday, October 24, 2011 10:16 AM The following tables list the required properties and returned data for this activity. Table 2-12. Remove Persona Required Properties Element Description Valid Values Look up ID The ID of the persona you want to remove String No Table 2-13.
AIMOpalis_bk0.book Page 36 Monday, October 24, 2011 10:16 AM The following tables list the required and optional properties and returned data for this activity. Table 2-14. Update Persona Required Properties Element Description ID The ID of the persona that is String updated Table 2-15. 36 Valid Values Look up No Update Persona Optional Properties Element Description Agent Exists If true, then an agent is True or False installed in the persona.
AIMOpalis_bk0.book Page 37 Monday, October 24, 2011 10:16 AM Table 2-15.
AIMOpalis_bk0.book Page 38 Monday, October 24, 2011 10:16 AM Table 2-15. Update Persona Optional Properties Element Description SCN Assignment Type Specifies how the SCN IP pool addresses are assigned static Yes Secondary SCN Address The persona's secondary SCN address String No Template Specifies whether the persona is a template True or False Yes Table 2-16.
AIMOpalis_bk0.book Page 39 Monday, October 24, 2011 10:16 AM Table 2-16.
AIMOpalis_bk0.book Page 40 Monday, October 24, 2011 10:16 AM Table 2-16.
AIMOpalis_bk0.book Page 41 Monday, October 24, 2011 10:16 AM Table 2-16. Update Persona Returned Data Name Description Value Type Version The version of the agent installed String on the persona Add Relationship Activity The Add Relationship activity is used in a policy to add a new child object to an existing Dell AIM object, such as adding a Network Connection or Image to a Persona. For the procedure to configure this activity, see Configuring the Add Relationship Activity.
AIMOpalis_bk0.book Page 42 Monday, October 24, 2011 10:16 AM Table 2-18. Add Relationship Returned Data Name Description Value Type AIM Object Type The type of Dell AIM object you can add.
AIMOpalis_bk0.book Page 43 Monday, October 24, 2011 10:16 AM The Get Relationship activity uses filters to determine which objects retrieved from Dell AIM are published. Filters are generated based on the AIM Object Type that is associated with the Dell AIM Object Type configuration that you select when you define the activity. Returned data is generated based on the AIM Object Type that is specified in the Dell AIM Object Type Configuration that you select when you define the activity.
AIMOpalis_bk0.book Page 44 Monday, October 24, 2011 10:16 AM Table 2-20.
AIMOpalis_bk0.book Page 45 Monday, October 24, 2011 10:16 AM Table 2-21. Maintenance Mode Required Properties Element Description Valid Values Look up Maintenance Mode Specifies whether you are enabling or disabling maintenance mode True or False Yes Table 2-22. Maintenance Mode Optional Properties Element Description Maintenance Description The reason for enabling String maintenance mode Table 2-23.
AIMOpalis_bk0.book Page 46 Monday, October 24, 2011 10:16 AM Run Operation Activity The Run Operation activity is used in a runbook to invoke an AimWS method, such as locking a persona to the server it has been assigned to or disabling a network connection. For the procedure to configure this activity, see, Configuring the Run Operation Activity. The activity publishes all of the data from the required and optional properties into returned data.
AIMOpalis_bk0.book Page 47 Monday, October 24, 2011 10:16 AM Table 2-25. Run Operation Optional Properties Element Description Parameter 9 The ninth parameter to pass to the String method Table 2-26. Valid Values Look up No Run Operation Returned Data Name Description Value Type AIM Server Location The location of the Dell AIM server String AIM Server Port The port used to connect to the Dell Integer AIM server AIM Username The username used to connect to the String Dell AIM server.
AIMOpalis_bk0.book Page 48 Monday, October 24, 2011 10:16 AM Table 2-26. Run Operation Returned Data Name Description Value Type Use SSL Specifies whether or not the SSL protocol was used to connect to the Dell AIM server. True or False Start Activity The Start activity is used in a runbook to start a persona or VMRack that is currently stopped.
AIMOpalis_bk0.book Page 49 Monday, October 24, 2011 10:16 AM Table 2-29. Start Returned Data Name Description Value Type AIM Object Type The type of object that you want to start String AIM Server Location The location of the Dell AIM server String AIM Server Port The port used to connect to the Dell AIM server Integer AIM Username The username used to connect to String the Dell AIM server. Host The ID of the Host that you want Persona to start the persona or VMRack VMRack on.
AIMOpalis_bk0.book Page 50 Monday, October 24, 2011 10:16 AM Stop Activity The Stop activity is used in a runbook to stop persona or VMRack that is currently running. For the procedure to configure this activity, see, Configuring the Stop Activity. The activity publishes all of the data from the required and optional properties into returned data. The following tables list the required and optional properties and returned data for this activity. Table 2-30.
AIMOpalis_bk0.book Page 51 Monday, October 24, 2011 10:16 AM Table 2-32. Stop Returned Data Name Description Value Type ID The ID of the persona or VMRack True or False that you want to stop State The state of the persona or stopped VMRack activity when the activity running finishes booting awaitingConfirmation shuttingDown Timeout The number of seconds to wait for Integer the persona or VMRack to stop. If not specified, the activity does not wait.
AIMOpalis_bk0.
AIMOpalis_bk0.book Page 53 Monday, October 24, 2011 10:16 AM 3 Configuring Dell Integration Pack Activities Configuring the Add Object Activity To configure the Add Object activity: 1 From the Activities pane, drag an Add Object activity to the active policy. 2 Double-click the Add Object activity. The Properties dialog box is displayed. 3 Configure the Properties tab. a In the Configuration section, click the ellipsis button (...
AIMOpalis_bk0.book Page 54 Monday, October 24, 2011 10:16 AM 4 For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions for All Activities. 5 Click Finish. Configuring the Get Object Activity To configure the Get Object activity: 1 From the Activities pane, drag a Get Object activity to the active policy. 2 Double-click the Get Object activity icon. The Properties dialog is displayed.
AIMOpalis_bk0.book Page 55 Monday, October 24, 2011 10:16 AM f Add additional filters as needed, and then click Finish. 4 To make changes to a filter, click the filter and then click Edit. Make the changes, and then click OK. To remove a filter, click the filter and then click Remove. 5 For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions for All Activities. 6 Click Finish.
AIMOpalis_bk0.book Page 56 Monday, October 24, 2011 10:16 AM For a list of the data elements returned by each activity, see the Returned Data tables in the activity topic. 4 For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions for All Activities. 5 Click Finish. Configuring the Update Object Activity To configure the Update Object activity: 1 From the Activities pane, drag an Update Object activity to the active policy.
AIMOpalis_bk0.book Page 57 Monday, October 24, 2011 10:16 AM 4 For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions for All Activities. 5 Click Finish. Configuring the Add Persona Activity To configure the Add Persona activity: 1 From the Activities pane, drag an Add Persona activity to the active policy. 2 Double-click the Add Persona activity. The Properties dialog box is displayed.
AIMOpalis_bk0.book Page 58 Monday, October 24, 2011 10:16 AM Configuring the Get Persona Activity To configure the Add Persona activity: 1 From the Activities pane, drag a Get Persona activity to the active policy. 2 Double-click the Get Persona activity icon. The Properties dialog is displayed. 3 Configure the settings in the Filters tab: a In the Configuration section, click the ellipsis button (...), and select the Dell AIM Object configuration that you want to use for this activity. Click OK.
AIMOpalis_bk0.book Page 59 Monday, October 24, 2011 10:16 AM 5 For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions for All Activities. 6 Click Finish. Configuring the Remove Persona Activity To configure the Remove Persona activity: 1 From the Activities pane, drag a Remove Persona activity to the active runbook. 2 Double-click the Remove Persona activity. The Properties dialog box is displayed.
AIMOpalis_bk0.book Page 60 Monday, October 24, 2011 10:16 AM Configuring the Update Persona Activity To configure the Update Persona activity: 1 From the Activities pane, drag an Update Persona activity to the active policy. 2 Double-click the Update Persona activity. The Properties dialog box is displayed. 3 Configure the Properties tab: a In the Configuration section, click the ellipsis button (...), and then select the Dell AIM configuration that you want to use for this activity. Click OK.
AIMOpalis_bk0.book Page 61 Monday, October 24, 2011 10:16 AM Configuring the Add Relationship Activity To configure the Add Relationship activity: 1 From the Activities pane, drag an Add Relationship activity to the active policy. 2 Double-click the Add Object activity. The Properties dialog box is displayed. 3 Configure the Properties tab: a In the Configuration section, click the ellipsis button (...), and then select the Dell AIM Object Type configuration that you want to use for this activity.
AIMOpalis_bk0.book Page 62 Monday, October 24, 2011 10:16 AM 4 For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions for All Activities. 5 Click Finish. Configuring the Get Relationship Activity To configure the Get Relationship activity: 1 From the Activities pane, drag a Get Relationship activity to the active policy. 2 Double-click the Get Relationship activity icon. The Properties dialog is displayed.
AIMOpalis_bk0.book Page 63 Monday, October 24, 2011 10:16 AM For a list of the data elements returned by each activity, see the Returned Data tables in the activity topic. 4 Configure the settings in the Filters tab: a In the Filters section click Add. In the Name box, click the down arrow and select a property from the list. b In the Relation box, click the down arrow and select a filter type. c In the Value box, enter the value you want to use.
AIMOpalis_bk0.book Page 64 Monday, October 24, 2011 10:16 AM Configuring the Maintenance Mode Activity To configure the Maintenance Mode activity: 1 From the Activities pane, drag a Maintenance Mode activity to the active runbook. 2 Double-click the Maintenance Mode activity. The Properties dialog box is displayed. 3 Configure the Properties tab: a In the Configuration section, click the ellipsis button (...), and then select the Dell AIM configuration that you want to use for this activity. Click OK.
AIMOpalis_bk0.book Page 65 Monday, October 24, 2011 10:16 AM Configuring the Run Operation Activity To configure the Run Operation activity: 1 From the Activities pane, drag a Run Operation activity to the active runbook. 2 Double-click the Run Operation activity. The Properties dialog box is displayed. 3 Configure the Properties tab: a In the Configuration section, click the ellipsis button (...), and then select the Dell AIM configuration that you want to use for this activity. Click OK.
AIMOpalis_bk0.book Page 66 Monday, October 24, 2011 10:16 AM property Parameter 1 and enter the ID of the persona that you want to lock. For more information on the parameters required for each AimWS method refer to the Dell Advanced Infrastructure Manager Developer's Guide. Configuring the Start Activity To configure the Start activity: 1 From the Activities pane, drag a Start activity to the active runbook. 2 Double-click the Start activity. The Properties dialog box is displayed.
AIMOpalis_bk0.book Page 67 Monday, October 24, 2011 10:16 AM 4 For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions for All Activities. 5 Click Finish. NOTE: If you do not include the optional Timeout property the activity will not wait for the specified persona or VMRack to start. Since persona booting takes some time, you can choose to poll the state if you are not using the timeout property.
AIMOpalis_bk0.book Page 68 Monday, October 24, 2011 10:16 AM For a list of the data elements returned by each activity, see the Returned Data tables in the activity topic. 4 For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions for All Activities. 5 Click Finish. NOTE: If you do not include the optional Timeout property the activity will not wait for the specified persona or VMRack to stop.
AIMOpalis_bk0.
AIMOpalis_bk0.
AIMOpalis_bk0.book Page 69 Monday, October 24, 2011 10:16 AM 4 Workflow The following sample workflows are part of the Dell Advanced Infrastructure Manager (AIM) Integration Pack for Dell to showcase some of the most common use cases of today's Workload management using Dell AIM. Workflow Requirements To import Workflows, Opalis version 6.3 with Dell AIM Integration pack for Opalis Version 1.0 installed and System Center Operations Manager (SCOM) integration pack version 5.6 installed.
AIMOpalis_bk0.book Page 70 Monday, October 24, 2011 10:16 AM AIM Connection Details The Workflow uses following connections with AIM: NOTE: If the AIM connections were not imported along with the policy, then create the connections. Connection Name Connection Type Details AIM-Connection Dell AIM The common connection used by all objects which executes specific functions like Start, Stop, and Get Personas.
AIMOpalis_bk0.book Page 71 Monday, October 24, 2011 10:16 AM Proactive Failover Dell Server Management pack for SCOM monitors heath of Dell server. It raises critical, warning, or both events in SCOM by interacting with Dell OpenManage. If a critical failure event like OMSA Temperature sensor detected a failure value occurs on a server, it triggers the Proactive Failover workflow. The Workflow retargets all the Workloads from the server which triggered the failure event.
AIMOpalis_bk0.book Page 72 Monday, October 24, 2011 10:16 AM • Due to the hostname dependency the SCOM objects in the workflow may not work after importing. You may need to reselect the connection for all the SCOM Objects based on your configuration. • Ensure that the Opalis server has a DNS server and hostname comes from the SCOM alerts are resolvable. Workflow – Proactive Failover When a critical failure occurs on a physical server, the Proactive Failover workflow retargets the server's workload.
AIMOpalis_bk0.book Page 73 Monday, October 24, 2011 10:16 AM a The workflow will move the physical host server into maintenance mode. NOTE: When the physical host server is moved to maintenance mode, AIM will not use the machine for any other Workload reallocation. b After stopping the persona using the Stop activity. NOTE: To check if the persona is NetBooted the GetPersona object is used. c If this persona is a netbooted persona then the Start activity takes care of starting the persona.
AIMOpalis_bk0.book Page 74 Monday, October 24, 2011 10:16 AM • SCOM alert is raised for each success and failure events. c Once the above said sub-flow gets completed it merges with the main flow where the physical host is moved into maintenance mode. d The VMRack is removed from maintenance mode and stopped as all the VMs are re-targeted to other servers. e The VMRack is started if it is a netbootable VMRack. NOTE: The Get Object (VMRack) is used to determine if the VMRack is netbooted or not.
AIMOpalis_bk0.book Page 75 Monday, October 24, 2011 10:16 AM Workload Retarget This sample workflow takes care of re-targeting Workload from one server to another server. The Workload movement is Physical to Virtual, Virtual to Virtual, Virtual to Physical, and Physical to Physical. Workflow Prerequisites The prerequisite for Workload Retarget workflow is: • AIM version 3.4.1 is installed and Opalis has connection with AIM controller.
AIMOpalis_bk0.book Page 76 Monday, October 24, 2011 10:16 AM • Target Type – Specify the type of target: – If you specify an actual physical or virtual Host ID then the Target Type is two. – If you specify the Hypervisor Host ID (physical Host ID of the HyperV) as target then the Target Type is one. If the Target Type is one, then the workflow will automatically chose one of the available Virtual Machines (VMs) from the hypervisor as target and hosts the persona.
AIMOpalis_bk0.book Page 77 Monday, October 24, 2011 10:16 AM The Retarget Workflow asks for details such as Source ID, Target ID and so on. For more information, see Workflow Inputs. 6 If the source type is Host then the workflow uses the Get Object (Source Host) to retrieve the persona running on the host otherwise the Source Id (entered by user) is used as the source persona ID.
AIMOpalis_bk0.book Page 78 Monday, October 24, 2011 10:16 AM Persona starts successfully but the workflow after waiting for sometime raises notification saying Failure to start Persona The Start objects has a timeout property which might have got expired before the persona actually started. Edit the object and increase the timeout which are in seconds.
AIMOpalis_bk0.book Page 79 Monday, October 24, 2011 10:16 AM 5 Related Reference For more information about Dell AIM, see the related product brochure, whitepaper, and product demo available on the Dell Infrastructure Management website at dell.com/dell-aim. For more information on virtual integrated systems, see the Dell Virtual Integrated System website at dell.com/vis. For more information on Microsoft System Center Opalis, its installation, or features and functionalities.
AIMOpalis_bk0.
AIMOpalis_bk0.