OptiPlex 3090 Ultra Setup and specifications guide Regulatory Model: D13U Regulatory Type: D13U003 January 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Set up your OptiPlex 3090 Ultra................................................................................... 5 Installing the device on a fixed stand............................................................................................................................. 5 Monitor tilt angle..........................................................................................................................................................
Chapter 5: Getting help...............................................................................................................89 Contacting Dell..................................................................................................................................................................
1 Set up your OptiPlex 3090 Ultra Topics: • • • • • Installing Installing Installing Installing Installing the device on a fixed stand the device on a Pro 1 height-adjustable stand device on offset VESA mount the device on a Pro 2 height-adjustable stand device on Wall Mount Installing the device on a fixed stand 1. Align and insert the slots on the fixed stand into the tab on the stand base. 2. Lift and tilt the stand base. 3. Tighten the captive screw to secure the stand to the base. 4.
. Remove the screw that secures the stand mounting bracket to the stand. 7. Lift the mounting bracket to release the hooks on the bracket from the slots on the stand.
8. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet. 9. Align the screws on the mounting bracket with the screw holes on the monitor. 10. Tighten the four captive screws to secure the mounting bracket to the monitor.
11. Select the height at which you want to mount the monitor and align the hooks on the mounting bracket with the slots on the stand. 12. Replace the screw to secure the fixed stand to the monitor.
13. Align the vents on the device with the vents on the stand cover. 14. Lower the device in the stand until you hear a click. 15. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet. NOTE: To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you route the cables as indicated in the image.
NOTE: All the cables and ports are used depending on the peripherals chosen and the configuration of the computer. 16. Slide the back cover, along with the device, into the stand until you hear a click.
17. Lock the device and the stand cover.
18. Press the power button to turn on the device.
Set up your OptiPlex 3090 Ultra 13
Monitor tilt angle Installing the device on a Pro 1 height-adjustable stand 1. Align and insert the slots on the height-adjustable stand into the tab on the stand base. 2. Lift and tilt the stand base. 3. Tighten the captive screw to secure the stand to the base.
4. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet. 5. For installing the height-adjustable stand to the monitor: a. Align and insert the hooks on the mounting bracket on the stand into the slots on the monitor, until you hear a click.
6. For installing QR to VESA bracket for E-Series monitor: a. b. c. d. 16 Align the screw holes on the QR to VESA bracket with the screw holes on the monitor. Install the four screw spacers and the screws to secure the QR to VESA bracket to the monitor. Align and insert the QR tabs on the stand into the slots on the QR to VESA bracket on the monitor. Tighten the thumb screw to secure the stand to the QR to VESA bracket.
7. To release the stand cover, slide the release latch until you hear a click. 8. Slide and lift the cover to release it from the stand. 9. Align the vents on the device with the vents on the stand cover. 10. Lower the device in the stand until you hear a click.
11. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet. NOTE: To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you route the cables as indicated in the image. NOTE: All the cables and ports are used depending on the peripherals chosen and the configuration of the computer.
12. Slide the back cover, along with the device, into the stand until you hear a click.
13. Lock the device and the stand cover.
14. Press the power button to turn on the device.
Set up your OptiPlex 3090 Ultra
Stand tilt, pivot, and swivel images Installing device on offset VESA mount 1. Align the screw holes on the device with the screw holes on the offset VESA mount. 2. Install the four screws to secure the device to the offset VESA mount.
3. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet. 4. Align the screw holes on the offset VESA mount with the screw holes on the monitor. 5. Install the four screw spacers and the screws to secure the offset VESA mount to the monitor.
6. Insert the hooks on the mounting bracket of the monitor arm stand into the slots on the offset VESA mount on the monitor. 7. Lower the monitor on the monitor arm stand until you hear a click.
8. To install the offset VESA mount on a Dell E-Series monitor: a. Align and install the four screws to secure the device to the offset VESA mount.
b. Remove the VESA cover from the back of the monitor and secure the offset VESA mount along with the device to the monitor.
Set up your OptiPlex 3090 Ultra
Set up your OptiPlex 3090 Ultra 29
NOTE: While orienting the monitor horizontally, route the security lock cable to the right side of the device to avoid any impact to WLAN performance. Installing the device on a Pro 2 height-adjustable stand 1. Align and insert the slots on the height-adjustable stand into the tab on the stand base. 2. Lift and tilt the stand base. 3. Tighten the captive screw to secure the stand to the base.
NOTE: For the large height adjustable stand, replacing the screw to the unlock icon screw hole in the stand base ensures the rotation of the 30-inch - 32-inch monitor.
4. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet. 5. For installing the height-adjustable stand to the monitor: a. Align and insert the hooks on the mounting bracket on the stand into the slots on the monitor, until you hear a click.
Set up your OptiPlex 3090 Ultra 33
6. For installing QR to VESA bracket for E-Series monitor: a. b. c. d. 34 Align the screw holes on the QR to VESA bracket with the screw holes on the monitor. Install the four screw spacers and the screws to secure the QR to VESA bracket to the monitor. Align and insert the QR tabs on the stand into the slots on the QR to VESA bracket on the monitor. Tighten the thumb screw to secure the stand to the QR to VESA bracket.
Set up your OptiPlex 3090 Ultra 35
7. To release the stand cover, press the button on the side of the stand chassis. 8. Slide and lift the cover to release it from the stand.
9. Slide and release the inner bar on the lower edge of the stand cover.
10. Align the vents on the device with the vents on the stand cover and slide the device in the cover.
11. Slide the inner bar back to the lower edge of the stand cover to lock the device to the cover.
12. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet.
13. To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you route the cables as indicated in the image. NOTE: All the cables and ports are used depending on the peripherals chosen and the configuration of the computer.
Large Height Adjustable Stand 42 Set up your OptiPlex 3090 Ultra
14. Slide the stand cover, along with the device, into the stand until you hear a click.
15. Lock the device and the stand cover.
16. Press the power button to turn on the device.
Stand tilt, pivot, and swivel images For 19-inch to 27-inch monitor (Standard height adjustable stand): 46 Set up your OptiPlex 3090 Ultra
For 30-inch to 32-inch monitor (Large height adjustable stand): Set up your OptiPlex 3090 Ultra 47
For monitors > 32-inch (Large height adjustable stand): 48 Set up your OptiPlex 3090 Ultra
Installing device on Wall Mount 1. Full Function a. Press the release button to open the cable cover. b. Align the screw holes on the wall mount in the wall and mark them against the wall using a pencil.
c. Drill the screw marks on the wall and insert the three screw anchors into the screw holes in the wall.
d. Align the screw holes on the wall mount with the screw holes on the wall and install the three screws to secure the wall mount in the wall.
e. Align the screw holes on the device with the screw holes on the wall mount bracket. f. Install the four screws to secure the device to the wall mount bracket.
g. Insert the hooks on the mounting bracket of the wall mount into the slots on the wall mount bracket module. h.
i. 54 Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet.
j. To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you route the cables as indicated in the image. NOTE: All the cables and ports are used depending on the peripherals chosen and the configuration of the computer.
k. Close the stand cover.
l. Lock the device and the stand cover.
2. Simple Function a. Align the screw holes on the wall mount in the wall and mark them using a pencil.
b. Drill the screw marks on the wall and insert the two screws into the screw holes in the wall.
c. Align the screw holes on the device with the screw holes on the wall mount bracket. d. Install the four screws to secure the device to the wall mount bracket.
e. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet.
f. Align the screws on the wall with the retention clips on the wall mount bracket module. g. Mount the wall mount bracket module in the screws on the wall.
h. Press the power button to turn on the device.
Set up your OptiPlex 3090 Ultra
2 Create a USB recovery drive for Windows Create a recovery drive to troubleshoot and fix problems that may occur with Windows. An empty USB flash drive with a minimum capacity of 16 GB is required to create the recovery drive. NOTE: This process may take up to an hour to complete. NOTE: The following steps may vary depending on the version of Windows installed. Refer to the Microsoft support site for latest instructions. 1. Connect the USB flash drive to your computer. 2. In Windows search, type Recovery.
3 View of OptiPlex 3090 Ultra Topics: • • • • • • • Top Bottom Left Right Front and back Stands view System board layout Top 1. Fan vent 2.
Bottom 1. 2. 3. 4. 5. 6. DisplayPort 1.4 + + HBR2 1 USB 3.2 Gen 2 Type-A ports with SmartPower On 1 USB 3.2 Gen 2 Type-A ports with SmartPower On RJ45 Ethernet port DC-in port 1 USB 3.
Left 1. 2. 3. 4. 5. 68 Headset/Universal Audio Jack Fan vent Hard-drive status LED 1 USB 3.2 Gen 2 Type-A port 1 USB 3.
Right 1. Kensington lock slot 2. Security screw lock slot 3.
Back 70 View of OptiPlex 3090 Ultra
1.
Pro 1.0 Height-adjustable stand: Pro 2.
Pro 2.
Offset VESA Mount: 74 View of OptiPlex 3090 Ultra
VESA Adapter for Pro2.
VESA Adapter for Pro1.
Wall Mount: View of OptiPlex 3090 Ultra 77
View of OptiPlex 3090 Ultra
System board layout 1. 2. 3. 4. 5. 6. 7. 8. System fan connector Power button connector Coin-cell battery connector Hard-drive connector CPU M.2 SSD PCIe Gen4 connector M.
4 Specifications of OptiPlex 3090 Ultra Topics: • • • • • • • • • • • • • • • • • • • • • Dimensions and weight Processor Chipset Operating system Commercial platform Windows 10 N-2 and 5yrs OS supportability Memory External ports Internal slots Ethernet Wireless module Audio Storage Power adapter GPU—Integrated Powering the system Type-C display settings Dell power button sync Data security Computer environment Energy Star and Trusted Platform Module (TPM) Smart power enablement Dimensions and weight Tab
Processor The following table lists the details of the processors supported by your OptiPlex 3090 Ultra. Table 2. Processor Description Option one Option two Option three Option four Processor type 11 th Generation Intel Core i3-1115G4 11 th Generation Intel Core i3-1115G4E 11 th Generation Intel Core i5-1145G7 Intel Celeron 6305 Processor wattage 15 W 15 W 15 W 15 W Processor core count 2 2 4 2 Processor thread count 4 4 8 2 Processor speed 3.0 GHz to 4.1 GHz 2.2 GHz to 3.
N-2). This device platform, OptiPlex 3090 Ultra will RTS with Windows 10 version (20H2, 20H1, 19H2) at the time of launch, and this version will determine the N-2 versions that are initially qualified for this platform. For future versions of Windows 10, Dell will continue to test the commercial platform with coming Windows 10 releases during device production and for five years post-production, including both fall and spring releases from Microsoft.
Table 5. External ports (continued) Description Values Power-adapter port 4.50 mm x 2.90 mm DC-in port Security-cable slot ● 1 Kensington lock slot ● 1 Security screw hole to secure cover ● Chassis Intrusion Switch Internal slots Table 6. Internal slots Description Values Internal: M.2 ● 1 M.2 2230 slot for WiFi and Bluetooth card ● 1 M.2 2230 slot for PCIe solid-state drive NOTE: To learn more about the features of different types of M.2 cards, see the knowledge base article SLN301626.
Table 8. Wireless module specifications (continued) Description Bluetooth Option one Option two Option three ● AES-CCMP ● TKIP ● AES-CCMP ● TKIP ● AES-CCMP ● TKIP Bluetooth 5.0 Bluetooth 5.1 Bluetooth 5.0 Audio Table 9.
Power adapter The following table lists the power adapter specifications of your OptiPlex 3090 Ultra. Table 11. Power adapter specifications Description Values Type 65 W Connector dimensions: External diameter 4.50 mm Internal diameter 2.90 mm Input voltage 100 VAC-240 VAC Input frequency 50 Hz-60 Hz Input current (maximum) 1.60 A /1.70 A Output current (continuous) 3.34 A Rated output voltage 19.
Table 12. GPU—Integrated (continued) Controller External display support Memory size Processor ● One DisplayPort 1.4 ++ HBR2 support over rear standard DP port Powering the system This system can be powered using a 65 W adapter (4.5 mm input power source) or through the USB Type-C cable connected to a display capable of providing power delivery of 65 W or greater.
1. 2. 3. 4. 5. Open Control Panel. Select Hardware and Sound option. Select Power Options from the list. In the Systems Settings page, you can choose the power settings required for the computer. For the option When I press the power button:, you can select Sleep/Hibernate/Shut down. NOTE: Do not select the option "Do nothing" from the drop down. This will prevent the monitor power button to sync with the computer power state.
Table 15. Computer environment (continued) Description Operating Storage Relative humidity (maximum) 10% to 90% (non-condensing) 0% to 95% (non-condensing) Vibration (maximum) * 0.66 GRMS 1.30 GRMS Shock (maximum) 110 G† 160 G† Altitude (maximum) -15.2 m to 3048 m (-49.87 ft to 10000 ft) -15.2 m to 10668 m (-49.87 ft to 35000 ft) * Measured using a random vibration spectrum that simulates user environment. † Measured using a 2 ms half-sine pulse when the hard drive is in use.
5 Getting help Topics: • Contacting Dell Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Go to Dell.com/support. 2.