TESLA K10 GPU ACCELERATOR BD-06280-001_v07 | November 2012 Board Specification
DOCUMENT CHANGE HISTORY BD-06280-001_v07 Version Date Authors Description of Change 01 April 10, 2012 GG, SM Preliminary Information (Information contained within this board specification is subject to change) 02 April 11, 2012 GG, SM •Updated board length •Updated “Overview” section •Updated Table 4 03 May 14, 2012 GG, SM •Removed “Preliminary Information” statement as 04 May 21, 2012 GG, SM Removed NDA and confidential statements from document 05 June 22, 2012 GG, SM Updated the “St
TABLE OF CONTENTS Overview ........................................................................................... 1 Key Features ..................................................................................... 1 Tesla K10 Block Diagram ....................................................................... 3 Configuration .................................................................................... 4 Mechanical Specifications .................................................................
LIST OF FIGURES Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Tesla K10 Block Diagram ............................................................ 3 Tesla K10 GPU Accelerator.......................................................... 5 Tesla K10 Bracket .................................................................... 6 Tesla K10 with Bracket .............................................................. 7 Tesla K10 without Bracket .................................................
OVERVIEW The NVIDIA® Tesla® K10 graphics processing unit (GPU) accelerator is a PCI Express, dual-slot, full height (4.376 inches by 10.5 inches by 1.52 inches) form factor computing module comprising two NVIDIA GK104 GPUs. The Tesla K10 offers a total of 8 GB of GDDR5 on-board memory (4 GB per GPU) and supports PCI Express Gen3. The Tesla K10 can be configured by the OEM or by the end user to enable or disable ECC or error correcting codes that can fix single-bit errors and detect double-bit errors.
Overview Board PCI Express Gen3 ×16 system interface Physical dimensions: 4.376 inches × 10.5 inches, dual-slot Board power: 225 W External Connectors None Internal Connectors and Headers One 6-pin PCI Express power connector One 8-pin PCI Express power connector Memory Memory clock: 2.
Overview TESLA K10 BLOCK DIAGRAM Figure 1 is the block diagram for Tesla K10 GPU accelerator. It comprises two identical GK104 GPUs, each with 4 GB of GDDR5 memory. The GPUs are connected via a PCI Express switch. The board supports PCI Express Gen3. Figure 1.
Overview CONFIGURATION The Tesla K10 boards are available in the following configurations (Table 1) based on the orientation of the airflow inside the system. Table 1. Board Configurations Specifications Generic SKU reference Tesla K10 •900-22055-0010-000: Airflow left to right •900-22055-0020-000: Airflow right to left Chip 2× GK104 Package size GPU 42.5 mm × 42.5 mm 1981-pin ball grid array (BGA) Processor clock 745 MHz Memory clock 2.
MECHANICAL SPECIFICATIONS PCI EXPRESS SYSTEM The Tesla K10 boards (Figure 2) conform to the PCI Express full height (4.376 inches by 10.5 inches) form factor. Figure 2 is shown without the bracket. 10.5 inches 4.376 inches Figure 2. Tesla K10 GPU Accelerator Note: The final product will ship with an 8 and 6-pin connector and shroud.
Mechanical Specifications STANDARD I/O CONNECTOR PLACEMENT As shown in Figure 3, the Tesla K10 includes a vented bracket. If you are an OEM who qualifies for bracket modifications, you have the option of receiving your modules with no bracket installed. Figure 3.
Mechanical Specifications If you need to remove the standard bracket follow these simple steps: 1. Remove the two shoulder screws on the back side of the PCB. 2. Remove the two flat head screws on the bracket exhaust face. 3. Remove the bracket. 4. Slide the washer in between the PCB and the backplate to maintain clearance between the PCB and the backplate. 5. Attach the shoulder screws. Figure 4. Tesla K10 with Bracket Figure 5.
Mechanical Specifications INTERNAL CONNECTORS AND HEADERS The Tesla K10 GPU accelerator supports the following internal connectors and headers. 8-pin PCI Express power connector (can be used with a 6-pin power cable) 6-pin PCI Express power connector External PCI Express Power Connectors The Tesla K10 GPU accelerator is a performance optimized, high-end product and uses power from the PCI Express connector as well as external power connectors. The board can be used in two different ways.
Mechanical Specifications Figure 6.
Mechanical Specifications Figure 7.
Mechanical Specifications Table 2. 6-Pin PCI Express Power Connector Pinout Pin Number Description 1 +12 V 2 +12 V 3 +12 V 4 GND 5 Sense 6 GND Table 3.
POWER SPECIFICATIONS The Tesla K10 GPU accelerator requires power from the PCI Express connector as well as one or two auxiliary power connectors. Table 4. Configuration with External PCI Express Connectors Connector Type 6-Pin Power Connector Supported 8-pin connected 6-pin connected Yes 8-pin connected No cable installed Yes 8-pin cable must supply 175 W 6-pin connected N/A No 6-pin cable in the 8-pin connector is not supported.
SUPPORT INFORMATION CERTIFICATES AND AGENCIES Agencies Australian Communications Authority and Radio Spectrum Management Group of New Zealand (C-Tick) Bureau of Standards, Metrology, and Inspection (BSMI) Conformité Européenne (CE) Federal Communications Commission (FCC) Industry Canada - Interference-Causing Equipment Standard (ICES) Korean Communications Commission (KCC) Underwriters Laboratories (cUL) Voluntary Control Council for Interference (VCCI) Tesla K10 GPU Accelerator BD-06280
Support Information LANGUAGES Table 5. Languages Supported Windows Server 2008 and Windows Server 2008 R2 Linux English (US) X X English (UK) X Arabic X Chinese, Simplified X Chinese, Traditional X Danish X Dutch X Finnish X French X French (Canada) X German X Italian X Japanese X Korean X Norwegian x Portuguese (Brazil) X Russian X Spanish X Spanish (Latin America) Swedish X Thai X Note: NVIDIA’s CUDA™ software is only supported in English (U.S.
Notice ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, “MATERIALS”) ARE BEING PROVIDED “AS IS.” NVIDIA MAKES NO WARRANTIES, EXPRESSED, IMPLIED, STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. Information furnished is believed to be accurate and reliable.