Reference Guide

Statement of Volatility – Dell 2408WFP Monitor
The purpose of this document is to certify that the Dell 2408WFP monitor will not save,
retain, or reproduce a signal to any internal or external component after power has been
removed and reapplied to the unit.
The Dell 2408WFP monitor contains both volatile and non-volatile (NV) memory ICs. Volatile
memory(s) lose their data immediately upon removal of power. Non-volatile memory ICs
continue to retain their data even after the power has been removed. However, no input
video data is written into these memory ICs during operation.
List below contains volatile and non-volatile memory ICs used in the Dell 2408WFP monitor.
Flash ROM
MX25xxxxxx
Size
16 Mbit
Type [e.g. Flash PROM,
EEPROM]
Serial flash memory
Volatility
Non-volatile
Can user programs or
operating system write data
to it during normal
operation? No
Purpose To store firmware
How is data input to this
memory?
Loading flash memory requires a vendor-provided
firmware file.
How is this memory write
protected? Software write protected
DDR SDRAM
H5XXXXXXX
Size 8 x 16 Mbit
Type [e.g. Flash PROM,
EEPROM]
DDR SDRAM
Volatility
Volatile
Can user programs or
operating system write data
to it during normal
operation?
No