Dell™ 2407WFP Flat Panel Monitor About Your Monitor Front View Back View Side View Bottom View Monitor Specifications Universal Serial Bus (USB) Interface Card Reader Specifications Plug and play capability Caring for Your Monitor Using Your Adjustable Monitor Stand Attaching the Stand Organizing Your Cables Using the Tilt, Swivel and Vertical Extension Removing the Stand Setting Up Your Monitor Rotating Your Monitor Changing the Rotation of Your Monitor Rotating Your Operating System Solving Problems M
Back to Contents Page About Your Monitor Dell™ 2407WFP Flat Panel Monitor Front View Universal Serial Bus(USB) Interface Back View Card Reader Specifications Side View Plug and play capability Bottom View Caring for Your Monitor Monitor Specifications Front View 1 Input indicators 2 Input Source Select 3 PIP (Picture In Picture) / PBP (Picture By Picture) Select 4 OSD Menu / Select 5 Down (-) 6 Up (+) 7 Power button (with power light indicator) Back View
1 VESA mounting holes (100mm) (Behind attached base plate) Use to mount the monitor. 2 Connectors label Indicate the positions and types of connectors. 3 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 4 Security lock slot Use a security lock with the slot to help secure your monitor. 5 Monitor Lock/Release Button Press to release the stand from the monitor. 6 Regulatory rating label List the regulatory approvals.
Left side 1 Card reader: for details please refer to Card Reader Specifications 2 USB downstream ports Bottom View 1 AC power cord connector 2 DC power connector for Dell™ Soundbar 3 DVI connector 4 VGA connector 5 Composite video connector 6 S-Video connector 7 Component video connectors 8 USB upstream port 9 USB downstream ports Monitor Specifications General Model number Flat Panel 2407WFP
Screen type Active matrix - TFT LCD Screen dimensions 24 inches (24-inch viewable image size) Preset display area: Horizontal 518.4 mm (20.4 inches) Vertical 324.0 mm (12.7 inches) Pixel pitch 0.
Physical Characteristics Signal cable type D-sub: Detachable, Analog, 15pin, shipped attached to the monitor DVI-D: Detachable, Digital, 24pin, shipped detached from the monitor S-video: Not included with display Composite: Not included with display Component: Not included with display Dimensions (with stand): Height (fully extended in portrait mode) 584.7 mm (23.0 inches) Height (compressed/locked in landscape mode) 387.9 mm (15.3 inches) Width 559.7 mm (22.0 inches) Depth 195.0 mm ( 7.
Pin Assignments VGA Connector Pin Number 15-pin Side of the Connected Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.
12 Floating 13 Floating 14 +5V / +3.
This monitor supports High-Speed Certified USB 2.0 interface. Data Rate Power Consumption High speed 480 Mbps 2.5W (Max., each port) Full speed 12 Mbps 2.5W (Max., each port) Low speed 1.5 Mbps 2.5W (Max.
Features The Flash Memory Card Reader has the following features: l Supports Windows 2000 and XP operating systems l No Windows 9X support from Dell l Mass Storage Class device (No drivers are required under Windows 2000 and XP) l USB-IF certification l Supports various memory card media Slot Number Flash memory cards type 1 Compact Flash type I/II Card (CF I/II) / CF form factor ATA hard drives to USB 2.
Write: 480 Mb/s (max.) Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different settings, but in most cases monitor installation is automatic.
Back to Contents Page Appendix Dell™ 2407WFP Flat Panel Monitor FCC Identification Information Safety Instructions Contacting Dell Your Monitor Setup Guide Product Information Guide FCC Identification Information FCC Class B This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio and television reception.
(AC) power available at your location: l ¡ 115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea (also 220 volts (V)/60 hertz (Hz)), and Taiwan. ¡ 230 volts (V)/50 hertz (Hz) in most of Europe, the Middle East, and the Far East. Always be sure that your monitor is electrically rated to operate with the AC power available in your location.
NOTE: Toll-free numbers are for use within the country for which they are listed. NOTE: In certain countries, support specific to DellTM XPS™ computers is available at a separate telephone number listed for participating countries. If you do not see a telephone number listed that is specific for XPS computers, you may contact Dell through the support number listed and your call will be routed appropriately.
Technical Support for XPS 02 481 92 96 Technical Support for all other Dell computers 02 481 92 88 International Access Code: 00 Technical Support Fax 02 481 92 95 Country Code: 32 Customer Care Belgium ( Brussels ) Corporate Sales 02 481 91 00 Fax 02 481 92 99 Switchboard 02 481 91 00 City Code: 2 Website: www.dell.com/bm Bermuda E-mail: la-techsupport@dell.com Technical Support toll-free 1-877-890 Website: www.dell.com/bo Bolivia E-mail: la-techsupport@dell.
Customer Care Fax 592 818 1308 Country Code: 86 Home and Small Business toll-free: 800 858 2222 Preferred Accounts Division toll-free: 800 858 2557 Large Corporate Accounts GCP toll-free: 800 858 2055 Large Corporate Accounts Key Accounts toll-free: 800 858 2628 Large Corporate Accounts North toll-free: 800 858 2999 Large Corporate Accounts North Government and Education toll-free: 800 858 2955 Large Corporate Accounts East toll-free: 800 858 2020 Large Corporate Accounts East Government and
El Salvador E-mail: la-techsupport@dell.com Technical Support (Telephonica) toll free: Website: support.euro.dell.com E-mail: fi_support@dell.com Technical Support 0207 533 555 Customer Care 0207 533 538 Switchboard 0207 533 533 Sales under 500 employees 0207 533 540 Fax 0207 533 530 Sales over 500 employees 0207 533 533 Fax 0207 533 530 Finland ( Helsinki ) International Access Code: 990 Country Code: 358 City Code: 9 Website: support.euro.dell.
Sales 2108129800 Fax 2108129812 E-mail: la-techsupport@dell.com Grenada General Support toll-free: 1-866- E-mail: la-techsupport@dell.com Guatemala General Support 1-800- E-mail: la-techsupport@dell.com Guyana General Support toll-free: 1-877- Website: support.ap.dell.com Technical Support E-mail: HK_support@Ddell.
Website: support.euro.dell.com Home and Small Business Technical Support 02 577 826 90 Customer Care 02 696 821 14 Fax 02 696 821 13 Switchboard 02 696 821 12 Italy ( Milan ) International Access Code: 00 Country Code: 39 Corporate City Code: 02 Technical Support 02 577 826 90 Customer Care 02 577 825 55 Fax 02 575 035 30 Switchboard 02 577 821 E-mail: la-techsupport@dell.com Jamaica toll free: 1-800-326 Technical Support (dial from within Jamaica only) toll free: 1-800Website: support.jp.
Latin America Fax (Technical Support and Customer Service) ( Austin , Texas , U.S.A. ) 512 728 Sales ( Austin , Texas , U.S.A. ) 512 728 512 728-4600 SalesFax ( Austin , Texas , U.S.A. ) or 512 728-3772 Website: support.euro.dell.
Country Code: 64 General Support Nicaragua E-mail: la-techsupport@dell.com Technical Support 0800 441 567 toll-free: 001-800 Website: support.euro.dell.com Technical Support for XPS Norway (Lysaker) International Access Code: 00 815 35 043 Technical Support for all other Dell products 671 16882 Relational Customer Care 671 17575 Country Code: 47 Home/Small Business Customer Care Switchboard 671 16800 Fax Switchboard 671 16865 E-mail: la-techsupport@dell.
Transaction Sales Corporate Sales toll-free: 1 800 394 7412 toll-free: 1 800 394 7419 Website: support.euro.dell.com E-mail: czech_dell@dell.com Slovakia ( Prague ) International Access Code: 00 Country Code: 421 Technical Support Customer Care 02 5441 5727 420 22537 2707 Fax 02 5441 8328 Tech Fax 02 5441 8328 Switchboard (Sales) 02 5441 7585 Website: support.euro.dell.com South Africa ( Johannesburg ) International Access Code: E-mail: dell_za_support@dell.
Country Code: 886 Customer Care toll-free: 00801 60 1250 Transaction Sales toll-free: 00801 65 1228 Corporate Sales toll-free: 00801 651 227 Website: support.ap.dell.
Financial Services (Dell Preferred Accounts [DPA]) toll-free: 1-800- Business U.S.A.
Back to Contents Page Setting Up Your Monitor Dell™ 2407WFP Flat Panel Monitor If you have a Dell™ desktop with no internet access 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. if you are using Windows XP, click the Adapter tab. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Follow the directions listed below for your identified Graphics Adapter: o ATI: 1.
Back to Contents Page Setting Up Your Monitor Dell™ 2407WFP Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920x1200 again.
Back to Contents Page Setting Up Your Monitor Dell™ 2407WFP Flat Panel Monitor If you have non Dell™ desktop, portable computer, or graphic card 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Please refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ). 6.
Back to Contents Page Setting Up Your Monitor Dell™ 2407WFP Flat Panel Monitor Important instructions and graphic drivers to set the display resolution to 1920x1200 (Optimal) For optimal display performance while using the Microsoft Windows® operating systems, set the display resolution to 1920 x 1200 pixels by performing the following steps: 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3.
Dell™ 2407WFP Flat Panel Monitor User Guide Important instructions and graphic drivers to set the display resolution to 1920x1200 (Optimal) Information in this document is subject to change without notice. © 2006 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Back to Contents Page Rotating Your Monitor Dell™ 2407WFP Flat Panel Monitor Changing the Rotation of Your Monitor Rotating Your Operating System Changing the Rotation of Your Monitor Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully tilted (Tilt) up to avoid hitting the bottom edge of the monitor.
Back to Contents Page Setting Up Your Monitor Dell™ 2407WFP Flat Panel Monitor Connecting Your Monitor Using the Front Panel Buttons Using the OSD Using the Dell™ Soundbar (Optional) Connecting Your Monitor CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.
1 AC power cord connector 2 DC power connector for Dell™ Soundbar 3 DVI connector 4 VGA connector 5 Composite video connector 6 S-Video connector
7 Component video connectors 8 USB upstream port 9 USB downstream ports To connect your monitor to the computer perform the following steps/instructions. l l l l l l l Turn off your computer and disconnect the power cable. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same computer.
B Use this button to activate PIP (Picture-in-Picture) / PBP (Picture-by-Picture) modes adjustment. Pressing this button continually cycles the monitor through the following modes : OFF- ->PIP- ->PBP. You will see the following messages corresponding to the mode selected. PIP / PBP Select → → C The MENU button is used to launch the on-screen display(OSD) and select the OSD Menu.
4. Push 5. Push MENU to enter the slide bar and then use the 6. Select the "back" option to return to the main menu or "exit" to exit the OSD menu. Icon and button to select the desired parameter. and buttons, according to the indicators on the menu, to make your changes. Menu and Submenus Description EXIT Select to exit the main menu. BRIGHTNESS & CONTRAST This menu is to activate Brightness/Contrast adjustment. Back Brightness Push to go back to the main menu.
Back Push to go back to the main menu. VGA Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. DVI-D Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source. S-Video Composite Component Select S-Video input when you are using S-Video connector. Push Select Composite input when you are using composite video connector. Push Select Component input when you are using component video connector.
Color Adjustment PC Blue: PC Blue is selected to obtain a bluish tint. This color setting is typically used for text based applications (Spreadsheets, Programming, PC Red: Red Preset is selected to obtain a redder tint. This color setting is typically used for color intensive applications (Photograph Image Ed etc.).
or NOTE: Image modes are different between the VGA/DVI-D and Video inputs Back Push to go back to the main menu. VGA/DVI-D input Desktop Mode Multimedia Mode Mode suitable for desktop applications. Mode for multimedia applications, eg video playback. Gaming Mode Mode suitable for gaming applications. Theater Mode Mode suitable for movie playback. Video input Sports Mode Mode suitable for sports scenes. Nature Mode Mode suitable for nature scenes.
Back Wide Mode Push to go back to the main menu. Adjust the image ratio as 1:1, aspect or full screen. NOTE: Wide Mode adjustment is not required at optimal preset resolution 1920 x 1200. H Position V Position Sharpness Zoom Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+). Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+). This feature can make the image look sharper or softer.
Transparency This function is used to adjust the OSD background from opaque to transparent. Menu Rotation Rotates the OSD by 90 degrees counter-clockwise. Your can adjust according to your Display Rotation. Menu Lock Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed.
PIP/PBP Contrast Adjust the contrast level of the picture in PIP/PBP Mode. reduce the contrast increases the contrast PIP/PBP Hue/Tint This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color. shifts image color towards green shifts image color towards purple PIP/PBP Saturation Adjust the color saturation of PIP/PBP image. makes the image look more monochrome makes the image look more colorful Exit Menu Push to exit the OSD main menu.
or or or or If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears. or NOTE: When the cable is connected back to the input of the monitor, any active PIP/PBP window will disappear. Please enter PIP/PBP submenu to bring back the PIP NOTE: The PIP/PBP functions can bring up a picture from a second image source.
NOTE: Soundbar Power Connector - 12V DC output is for optional Dell™ Soundbar only. NOTICE: DO NOT USE WITH ANY DEVICE OTHER THAN DELL Soundbar. 1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connect the Soundbar with the DC power connector. 4. Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
Back to Contents Page Solving Problems Dell™ 2407WFP Flat Panel Monitor Monitor Specific Troubleshooting Common Problems Video Problems Product Specific Problems Universal Serial Bus (USB) Specific Problems Dell™ Soundbar (Optional) Troubleshooting Card Reader Troubleshooting CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.
l l Missing Pixels Stuck-on Pixels Brightness Problems LCD screen has spots l LCD screen has bright spots l Picture too dim or too bright l l l l l Check environmental factors Relocate and test in another room Cycle power on-off These are pixels that are permanently off and is a natural defect that occurs in LCD technology Cycle power on-off These are pixels that are permanently on and is a natural defect that occurs in LCD technology Perform monitor reset on "Factory Reset" Auto Adjust via
Blinking Video Video is blinking or discontinuous l Check DVD connection ¡ Composite gives good picture ¡ S-Video gives better picture ¡ Component: Red, Blue, Green colored RCA jacks l Check if DVD player is HDCP compliant. ¡ Some non-compliant players may exhibit blinking video and others will display a raster screen. NOTE: When choosing S-Video, Composite or Component video, Auto Adjust function is not available.
2407WFP) l l No Sound Soundbar has power - power indicator is on. l l l l l l Distorted Sound Computer's sound card is used as the audio source. l l l l l l l l Distorted Sound Other audio source is used. l l l l l Unbalanced Sound Output Sound from only one side of Soundbar l l l l l l Low Volume Volume is too low. l l l l l Confirm that the monitor has power. If the monitor has no power, see Monitor Specific Troubleshooting for monitor common problem.
Back to Contents Page
Back to Contents Page Using Your Adjustable Monitor Stand Dell™ 2407WFP Flat Panel Monitor Attaching the Stand Organizing Your Cables Using the Tilt, Swivel and Vertical Extension Removing the Stand Attaching the Stand 1. 2. 3. Place the stand on a flat surface. Fit the groove on the back of the monitor onto the 2 tabs of upper stand. Lower the monitor so that the monitor mounting area snaps on or locks to stand.
NOTE: Stand is detached and extended when the monitor is shipped from the factory. Vertical Extension Stand extends vertically up to 100mm via the Lock down / release button. NOTE: If locked in the down position, press the Lock down / release button on the bottom rear of stand. Lift the front panel up and extend the stand to the desired height. NOTICE: Before relocating or moving the monitor to a different location, make sure that the stand is LOCKED DOWN.
NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.