Warnings and Specifications

ManualsBrandsDell ManualsHardwarePowerSwitch N2224X-ON switch - 24 ports - Managed - rack-mountable - CAMPUS Smart Value

Dell EMC PowerSwitch N2200-ON Series

Summary of content (6 pages)

PAGE 1
Dell EMC PowerSwitch N2200-ON Series Warnings and Specifications
PAGE 2
© 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. 2020 - 03 Rev.
PAGE 3
1 N2200-ON Series Warnings and Specifications This document lists Warnings, Regulatory information, and Specifications for the Dell EMC PowerSwitch N2200-ON Series switch. Table 1. Document revision history Revision Date Description A00 2019-12 Initial release. A01 2020-03 Added Chinese DC input warning. Support and documentation • • For installation instructions, see the Dell EMC PowerSwitch N2200-ON Series Installation Guide at www.dell.com/support/. To access the support site, go to www.dell.
PAGE 4
Cautions CAUTION: Operate the equipment at an ambient temperature not higher than 45°C (113°F). CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same or equivalent type of battery. Dispose of the batteries according to the manufacturer instructions. Notes NOTE: If necessary, to upgrade your software or firmware images, go to the Drivers and Downloads page for your switch at www.dell.com/support.
PAGE 5
Marketing model name N2224X-ON N2224PX-ON N2248X-ON N2248PX-ON lbs: 14.30 lbs: 14.70 lbs: 15.09 lbs: 15.77 kg: 6.485 kg: 6.67 kg: 6.845 kg: 7.155 PSU is 1.75 lbs (0.79 kg (550W) PSU is 1.95 lbs (0.88 kg (1050W) PSU is 1.75 lbs (0.79 kg (550W) PSU is 2.0 lbs (0.9 kg (1600W) mm (H x W x D) Weight** *Maximum number of PSUs available for the switch. **Chassis weight with one PSU.
PAGE 6
Parameter Specifications Maximum operational altitude 10,000 feet (3,048 meters) Maximum non-operational altitude 39,370 ft (12,000 meters) Shock Dell EMC Spec SV0115 Table 5. Power consumption parameters Parameter Specifications Input voltage AC: 100–240 VAC 50/60 Hz DC: –40 VDC to –60 VDC Input current without PoE • • • • Maximum current draw per system 7A@110VAC N2224X-ON: 2.46 Amps @ 110 VAC and 1.23 Amps @ 220 VAC N2224PX-ON: 2.4 Amps @ 110 VAC and 1.2 Amps @ 220 VAC N2248X-ON: 3.