User Manual
These high-performance 802.11n APs deliver wireless data rates
up to 450Mbps per radio and employ three spatial streams to
support 50% more throughput and mobile devices than previous-
generation APs.
The W-AP115 and W-IAP115 APs feature a 2.4GHz and a 5GHz
radio, each with 3x3:3 MIMO and three integrated omni-directional
downtilt antennas. The W-AP114 and W-IAP114 models feature the
same radios with three combined and diplexed external antenna
connectors.
Advanced Cellular Coexistance (ACC)
The 110 Series ACC feature enables Dell Networking WLANs
to perform at peak efficiency by minimizing interference
from 3G/4G LTE networks, distributed antenna systems and
commercial small cell/femtocell equipment.
WiFi client optimization
To eliminate sticky client behavior while users roam, the 110
Series features patented ClientMatch™ technology, which
continuously gathers session performance metrics from
mobile devices.
If a mobile device moves out of range of an AP or if RF
interference impedes performance, ClientMatch automatically
steers the device to a better AP.
Quality of service for Lync
110 Series APs additionally support priority handling and
policy enforcement for individual Microsoft Lync media on the
same device, including encrypted videoconferencing, voice,
chat and desktop sharing.and 5GHz radio bands to optimize
WiFi client performance and ensures that APs stay clear of RF
interference.
Best-in-class RF management
All Dell Networking W-Series APs include Adaptive Radio
Management™ (ARM) technology, which is essential to
creating the most reliable, high-performance WLANs. ARM
manages the 2.4GHz and 5GHz radio bands to optimize WiFi
client performance and ensures that APs stay clear of RF
interference.
110 Series APs can be configured to provide part-time or
dedicated air monitoring for spectrum analysis and wireless
intrusion protection, VPN tunnels to extend remote locations
to corporate resources, and wireless mesh connections where
Ethernet drops are not available.
Choose your operating mode
110 Series APs offer a choice of operating modes to meet your
unique management and deployment requirements.
Controller-managed mode: When managed by Dell
Networking W-Series Mobility Controllers, 110 Series APs offer
centralized configuration, data encryption, policy enforcement
and network services, as well as distributed and centralized
traffic forwarding. Refer to the Mobility Controller data sheets
for more details.
Instant™ mode: In Instant mode, a single AP automatically
distributes the network configuration to other Instant APs in
the WLAN. Simply power-up an Instant AP, configure it over
the air, and plug in the other APs — the entire process takes
about five minutes.
If WLAN and network requirements change, a built-in
migration path allows 110 Series Instant APs to become part of
a WLAN that is centrally managed by a Mobility Controller.
Dell Networking W-Series
110 Series access points
Optimize client performance in high-density WiFi environments
Multifunctional and aordable 110 Series wireless access points (APs) maximize mobile device
performance in high-density WiFi environments while minimizing interference from LTE cellular networks.
110 Series access points
maximize mobile device
performance in high-density
WiFi environments while
minimizing interference
from LTE cellular networks.