Instruction Manual

Statement of toxic and harmful substances in electronic information products：
Polybrominated
FCC Warning
diphenyl ethers this form is prepared according to the customization of SJ/T 11364
0
: It means that the content of the content of the toxic and harmful substance in all homogeneous
materials of the component is below the limit specified In GB / T 26572.
: The content of table auxiliary toxic and harmful substances in at least one homogeneous
material of the component exceeds the limit specified in GB / T 26572.
The product complies with EU rohs2.0 directive
(2011 / 65 / EU)
(PBDE) (PBB) (Cr VI) (Cd) (Hg)
(pb)
Magnetic absorption wireless fast
charging mobile power supply
10000mAh 20W
An instruction manual
Please reed this instruction carefully before using the product and keep it properly
5V4.5A, 4.5V5A
Product size：110x68x16mm
Type-C Input：5V3A, 9V2A
Type-C output：5V3A, 9V2.2A, 9V2A
Wireless charging and output：
5W, 7.5W, 15W
Brand：DEKSMO
Product name：Wireless Power Bank
Model：D10Pro
Batter y model：polymer batter y
Material：ABS + PC
Batter y capacity: 10000m
h
Rated capacity: 5800m h
Energy conversion：≥75%
USB output: 5V3A, 9V2A, 12V1.5A,
Net weight：184g
Packing list:
Portable source*1 instructions*1 warranty card*1 USB to Type-C
Charging line*1
Product description：
This product is a portable charging device that can provide wired charging and wireless
charging for mobile phones, tablets, e-books, game machines and other famous
products. The product has the characteristics of wired charging and wireless charging in
one, magnetic suction positioning, power digital display, ip20W PD fast charging, three
output (including wireless output), 15W wireless fast charging, etc. Product built-in FOD,
overcharge, over discharge, temperature protection and other safety protection circuit.
Key ope
ration instructions：
When checking the power：
Press the key once to start the power output function to check the remaining power of
the power supply. The power display will automatically turn off after about 30 seconds;
When charging mobile power：
When connecting to the charging line matching the mobile power interface, the number of electric
quantity display will jump, which means that the connection is normal and the power supply is
charged. If there is no jump in the power indicator after connecting the charging line, it means that the
connection fails and there is no charging. Please check whether the charging li
ne is connected
normally.
Operation instruction of wired charging and outputting：
Connect the USB charging cable to the corresponding output port of the power supply, and the power
supply will automatically turn on the output. Due to compatibility problems, some smart phones need
Wireless charging tips：
to press the key to turn on the power output function, which is a normal phenomenon and no need
to doubt. Press the key once to supply power to the external equipment.
Wireless charge and output operation Instructions：
Press the key once, and the power digital display will
be on. At this time, the mobile phone that
supports wireless charging will start charging within 30 seconds. Place the mobile phone in the
wireless charging area to charge the mobile phone wirelessly. If there is no wireless load access
within 30 seconds, the product will automatically tum off the wireless charging function.
Wireless charging mobile phone needs to place the wireless charging area of the product (see the
illustration for the wireless charging coil emission area) for wireless charging. The charging distance of
this product is within 2mm. If the wireless charging distance exceeds 2mm, the wireless charging
cannot be carried out. Please adjust the wireless charging distance of the mobile phone within the
wireless charging range.
Charge the product：
1.Check whether the charging voltage of the digital product matches the output voltage of the
product.
Use the power adapter / computer USB port to charge the local wireless charging mobile power
supplyl. The type-C charging cable can be used to plug into the type-C input port of the wireless
charging mobile power supply to charge the power supply2. Connect
the USB connector to the
charger or the USB port of the computer, and the number of the power indicator will start to jump,
indicating that the product is being charged. When it is fully charged, the digital display will display
"100".
Use this product to charge mobile phones or other digital devices：
2. Select the original charging cable of the digital product, one end is connected with the digital
3.Charge the mobile phone with wireless charging function, press the key once, and the digital display
will light up. At this time, wireless charging can be suppor
ted. Put the mobile phone with wireless
charging function in the center of wireless charging of mobile power supply, and the mobile phone
product, and the other end is connected with the output port of the product. The wired output
terminal of the product will automatically turn on to charge the mobile phone or other digital
products, and the digital display screen will always be on.
can be charged at this time, and the digital display will be always on.
Reminder：
Please read all instructions and warnings before using this product. Improper use will damage the
product or personal safety.
1.Please make sure that the charging contact surface on the
back of the mobile phone does not
contain metal substances, such as iron sheet, ring, metal protective case, etc.
2. When the mobile phone Is charging, if intermittent charging or serious heating is found, it is likely
that the receiving coil of the mobile phone is not fully aligned with the wireless charging coil, and
there are metal foreign bodies in the protective sleeve of the mobile phone. Please try to cool the
or reduce the output power, reduce the charging speed and ensure safety. Please check whether the
mobile phone, remove the protective sleeve, and then align it in the normal position.
3. This product has over-current protection function. If the product is used improperly, it will turn off
equipment is used improperly
or not.
4.Do not place the product in water, fire, medium high temperature environment (more than 50℃)
and low temperature environment (less than -20℃). Do not play with children, especially the
accessories.
5.Please use a dry soft cloth to clean the surface. Do not use chemicals, soap or detergent.
6.Please don’t dismantle the machine by yourself. The user’s abnormal use or improper placement
of this product may reduce the service life or damage the product. Therefore, the responsibility does
not belong to the warranty responsibility or the manufacturer’s responsibility. Please understand.
7. There is conversion rate in mobile power supply, so the battery capacity of mobile power supply is
not equal to the rechargeable capac
ity.
8. Please charge your power regularly (at least 5 month is recommended) to maintain its long
service life.
9. Improper use of the product may easily cause damage to the product or endanger the
safety of personal and property.
10. In case of any personal and property damage caused by consumers’ improper use or violation
of the product instructions, the consumer will bear all consequences, and the company will
not bear any legal liability.
11. Non professionals are strictly prohibited to decompose this product.
12. Avoid using electrical appliances or loads that exceed the output current of the product (the
circuit will be protected, no output).
13. Avoid strong physical effects, including knocking, throwing, trampling, squeezing, etc.
Icon description：
The 5-year icon ref
ers to the “environmental protection effective use period”, not the product quality
guarantee period. Electronic products contain lead,
mercury, cadmium and other toxic and harmful substances. Once used beyond the time limit, toxic
and harmful substances may leak or mutate, causing pollution to the environment or serious
damage to people and property"Environmental protection service life"unexpectedly means that all
electronic products are required to be used within this period of validity. We are no longer
responsible for the product quality for the safety risk problems after the safe service life.
Thank you for purchasing our products. When you have any non-human
performance failure during
Warranty policy：
the use of the products, you will enjoy the service commitment of "repair, refund and replacement” for
short. In order to protect your rights and Interests, please keep the Three Guarantees certificate and
invoice properly after purchasing the product. The validity period of the three guarantees of the
product will be calculatedfrom thedate you receive theproduct(hereinafter referredto as "receiving"),
and the validity period of the three guarantees of the product is 6 months. Three guarantees
service
content：1. Within 7 days from the date of receipt, ensure that the goods received are in good
condition,the product packaging andaccessoriesare completeand no oneis damaged, thepayment
can be refunded at the invoice price at one time, the goods can be replaced with the same type and
specification products or repaired free of charge. 2.Within 8 to 15 day from the date of receipt, on one
is damaged, and the products of the same model and specification can be replaced. The Seller shall
be responsible fo
r the replacement of products. 3.If the product cannot be used normally after two
product replacement Within the validity period of the Three Guarantees, after the inspection and
confirmation, you can use the effective replacement record provided by the seller in the Three
Guarantees certificate, and you can choose to repair or replace the products of the same model and
specification. The products are the responsibility of the seller.
How to obtain the Three Guarantees service: In enter to protect your legal rights and int
erests, you
need to enjoy the Three Guarantees service at the seller. When you request three guarantees of
service, you must provided: 1.original of purchased products; 2.Invoice or seller's purchase record
certificate when purchasing products; 3.there ere three guarantees.
Cases not within the scope of warranty service:
The product exceeds the three guarantees validity period;Without three guarantees certifica
te and valid invoice,it is impossible to prove that the purchased products are within th
e period of three guarantees validity;
The warranty certificate is inconsistent with the product model identification or
altered
Unauthorized maintenance, alteration, misuse, collision, drop, extrusion, liquid feeding
and corrosion
Damage caused by flood, fire, lightning and other force majeure; Defects caused by normal wear or
aging of products.
Paid service guarantee
If the product does not meet the warranty conditions and needs to be charged, the appropriate repair
fee will be calculated according to the cost of parts and labor, and the repair quotation will be put
forward to you. Afterobtainingyour consent and paying ihe fee, the repairservice will be provided for
your product.
This policy is formulated in strict accordance with the consumer protectionlaw .
Warranty card
For your interests, please fill in the form carefully and keep it properly as the certificate
before maintenance
Product model
Date of manufacture
Customer name
Customer phone
Customer address
Purchase date Year month day
Maintenance date Fault content Repairman User signature
Toxic and harmful substances or elements
Lead
mercury
cadmium
Hexavalent
chromium
Polybrominated
biphenyls
Polybrominated
diphenyl ethers
PCB
electrode
Battery
Shell
Accessory name
X
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate the
receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician for
help.
Radiation Exposure Statement : This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
The device has been evaluated to meet general RFexposurerequirement.
The device can be used in portable exposure condition, compliance with exposure
requirements.