Menu Functions Your delivery rate and the hours remaining on the cassette displays. The Main Menu displays. 3. Use the down arrow Delivery. 2. Unlock the screen by pressing each front button from left to right. to highlight Stop A Stop Pump Delivery? question displays. 4. Press to stop medication delivery. A Sending request to the pump message displays. 108 DKPI-09153-001-Rev. 1.
Cell phones, Bluetooth devices, RFID readers, and Wi-Fi equipment may affect the communication between the Pump and Remote or interrupt operation of the Pump. Keep the Pump and Remote at least 0.8 m [3 ft] away from these items. See Table 28 on page 223 and See Table 30 on page 226 for more information. 5. Press to silence the attention alarm. 6. Press to acknowledge the Pump delivery has stopped Attention Alarm. DKPI-09153-001-Rev. 1.
Menu Functions When the pump has been stopped, the top banner changes to blue. 1. Press any button to display the main menu. 2. Use the down arrow Delivery. to highlight Start A Start Pump Delivery? question displays with the last rate. 110 DKPI-09153-001-Rev. 1.
The Remunity System stores various information about recent use of the system and is viewable anytime within the Historical menu. The system can store at least 1500 entries of the following events: • • • 3. Press to start medication delivery. A Sending request to the pump message displays. • • • • • • • DKPI-09153-001-Rev. 1.
Menu Functions When the logs have reached the maximum capacity, the oldest entries will be discarded. Remote Battery The logs are maintained when the system is powered down or loses power. The Remote Battery historical menu feature displays the remote's current battery charge level and charging state. 1. Press the side button to wake up the remote. 2. Unlock the screen by pressing each front button from left to right. 3. Use the down arrow to scroll to History. 4. Press . 5.
Menu Functions Pump Cassette Info The Pump Cassette Info displays the pump's remaining volume and the time until the pump is depleted. 1. Press the side button to wake up the remote. 6. Review the Charge and State of the remote battery and press when finished. 2. Unlock the screen by pressing each front button from left to right. 3. Use the down arrow to scroll to History. 4. Press . 5. Use the down arrow Cassette Info. DKPI-09153-001-Rev. 1.
Menu Functions 6. Press . The Pump Remaining data displays. Previous 24 Hours The Previous 24 Hours displays the volume of medication delivered in the past 24 hours and the amount of time the pump was delivering in the last 24 hours. 1. Press the side button to wake up the remote. 7. Review the Volume of medication left in the cassette and the Time until the cassette is fully depleted. 8. Press when finished. 2. Unlock the screen by pressing each front button from left to right. 3.
. The Pump Last 24 Hours data displays. Event Viewer The Event Viewer displays the following types of historical events along with how long ago the event occurred and any additional information: • • • • • • 7. Review the Volume of medication delivered in the last 24 hours and the amount ofTime the pump was delivering over the last 24 hours. 8. Press when finished. DKPI-09153-001-Rev. 1.
Menu Functions 5. Use the down arrow Viewer. 6. Press to scroll to Event . 7. Use the left and right arrows through the list of events. 8. Press to scroll to return to the Historical Menu. The most recent Event History data displays. 116 DKPI-09153-001-Rev. 1.
Paired Pump The Setup menu is used to set your personal preferences related to the remote’s settings and provides access to the following features: The Paired Pump setting displays the pump Serial Number. • • • • • • • • Paired Pump Walkaway Attention Alarm: ON/OFF Screen Timeout Remote Audio Passcode: ON/OFF Airplane Mode Factory Reset System Information To view the currently paired pump serial number: 1. Press the side button to wake up the remote. 2.
Menu Functions The currently paired pump's serial number displays. Pair to a Spare Pump Cell phones, Bluetooth devices, RFID readers, and Wi-Fi equipment may affect the communication between the Pump and Remote or interrupt operation of the Pump. Keep the Pump and Remote at least 0.8 m [3 ft] away from these items. See Table 28 on page 223 and See Table 30 on page 226 for more information.
Menu Functions 5. Press . The currently paired pump's serial number displays. The remote will display Searching as it locates the new pump's serial number. 6. Press to pair to a different pump. DKPI-09153-001-Rev. 1.
Menu Functions 9. When the new pump's serial number appears, use the 7. Place the pump and remote within 2 in (50 mm) of each other during the pairing process. 8. If your pump's serial number does not show up on screen after a minute, press and hold the pump’s blue button for 10 seconds to activate pairing mode. Then, check the screen again for your pump serial number. 120 to scroll to the new pump's serial number and press . DKPI-09153-001-Rev. 1.
Menu Functions 10. Press again to confirm pair. A Pairing To... message displays. If pairing fails, see "Pairing Failed Attention Alarm" on page 166 DKPI-09153-001-Rev. 1.
Menu Functions 12. Use to set your prescribed rate, then press . 13. Disregard the remote displaying a Fill new cassette with X.X mL, prime, and install message. 14. Wash your hands, gather cassette change supplies, and follow the cassette change steps starting from "Prepare Priming Aid" on page 70. 11. Upon successful pairing, press to confirm the Paired Pump. a. If you have previously used the pump or the remote, your current delivery rate is saved and you do not need to set it again. Skip to Step 13.
Cell phones, Bluetooth devices, RFID readers, and Wi-Fi equipment may affect the communication between the Pump and Remote or interrupt operation of the Pump. Keep the Pump and Remote at least 0.8 m [3 ft] away from these items. See Table 28 on page 223 and See Table 30 on page 226 for more information. 1. Press the side button to wake up the remote. If this is the first time you are using the remote, it will search for a pump when you power on.