Data Sheet

Deity Microphones ‘Deity Connect’ Product Sheet
The BP-TX is made out of brushed aluminum to give it tough, durable build quality. The
top of the unit features an SMA antenna connector, a 1/4″ 20 mounting point for the belt
clip, and a locking 3.5mm standard microphone input. With 2 multi-color LED alert lights
you will be able to tell the status at just a glance. The daylight bright OLED display
offers a fast refresh rate so VU meters bounce in real time. The high resolution of the
OLED display allows for the statuses of all the major features to be displayed on the
home screen.
The Transmitter RF power output is 100mw / 50mw / 25mw / 10mw/ or AUTO. When
you set the BP-TX to AUTO RF Power the Deity Connect’s DUO-RX will transmit a
pulse to the BP-TX (if the signal drops below the threshold), telling the BP-TX to
increase its RF power output to help prevent a loss of signal. Using AUTO RF Power
will also increase your battery life because you will never use more power than the
system actually needs.
All settings on the BP-TX can be overwritten in the menu of the DUO-RX. Now you no
longer have to walk over to an actor to change a simple setting. Simple pull up which
transmitter you need to adjust in the menu of the DUO-RX, make the change, and
instantly the selected BP-TX updates to the new setting.
From the start Deity Microphones wanted the Deity Connect system to work with the
ergonomics of a sound bag. The DUO-RX was designed so that the screen, buttons,
and antenna all face up in a sound bag so the operator does not need to remove it. And
with the USB-C power and audio outputs on the bottom, the cable management can be
maximized inside the audio bag. These two ergonomic principals also allow for the
screen to face camera operators when mounting it onto a camera, instead of facing the
ceiling like other brands.
Deity Microphones added dual SMA elbow antennas so no matter how you mount the
DUO-RX your external antenna can always be mounted vertically. But Deity
Microphones took it a step further by adding two dipole internal horizontal antennas to
capture signals on the horizontal plane. This quad design gives us a dual true diversity
setup across two receiver modules. This is the same method used in commercial grade
WiFi and high-end drones. And because Deity Microphones offer users removable
antennas, you can upgrade the antenna array yourself if you want to add a clover
antenna, directional antenna, or even connect to a 2.4Ghz antenna splitter.