Use and Care Manual
Use and Care Guide
Plug-In App Timer
IP07232014 HOMEDEPOT.com
Please contact 1-866-308-3976 for further assistance.
Item #
1001-470-463
Model #13975
UPC #030878139755
Before You Begin
Product Information and Features
□ Controls one standard incandescent light, CFL, LED, fan, or small appliance
□ Space efcient design
□ Does not block the lower outlet when plugged into the upper outlet of a duplex wall
receptacle as long as the ground pin in the receptacle is down
Safety Information
WARNING: Do not use with medical or life support equipment. Never use this device to supply power
to, or control the On/Off status of medical and/or life support equipment.
WARNING
RISK OF ELECTRIC SHOCK:
Do not use in wet locations
Use indoors only
Unplug device before cleaning
Plug directly into an electrical outlet
Keep children away
RISK OF ELECTRIC FIRE:
THIS DEVICE HAS A POLARIZED PLUG AND OUTLET. IF THE PLUG DOES NOT FIT INTO THE
OUTLET, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE PROPER OUTLET. DO NOT
CHANGE THE PLUG IN ANY WAY.
Do not use to control appliances that contain heating elements (cooking appliances,
heaters, irons, etc.)
Do not exceed electrical ratings
Do not use with extension cords
WARNING: Do not disassemble this product. There are no serviceable parts inside.
WARNING: Exercise extreme caution when using this device to control appliances. Operation of this
device may be in a different room than the controlled appliance. Also an unintentional activation may
occur if the wrong button on the remote is pressed. This device may automatically be powered on
due to timed event programming. Depending upon the appliance, these unattended or unintentional
operations could possibly result in a hazardous condition. For these reasons, we recommend the
following:
□ Do not use this device to control electric heaters or any other appliances which may present
a hazardous condition due to unattended or unintentional or automatic power on control.
□ Use the provided 3.5 mm cord to connect to the headphones jack to devices.
Product Specications
□ For indoor use only.
POWER MAX LOAD FOR OUTLET
120VAC, 60Hz
10A, 1200W Resistive
5A, 600W Tungsten
Warranty
The manufacturer warrants this product to be free from manufacturing defects for a period of one year
from the original date of consumer purchase. This warranty is limited to the repair or replacement of this
product only and does not extend to consequential or incidental damage to other products that may be used
with this product. This warranty is in lieu of all other warranties, expressed or implied. Some states do not
allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental
or consequential damage, so the above limitations may not apply to you. This warranty gives you specic
rights, and you may also have other rights which vary from state to state.
Contact Home Depot customer service at 1-866-308-3976 or visit www.homedepot.com for more
information.
Installation and Operation
1
PLUGGING IN THE APP TIMER
Verify the override switch on top of the timer is set to the “TIMER” position. Plug the app timer
into an available outlet. A top outlet is recommended.
TIMER OFF ON
2
CONNECTING A LIGHT/DEVICE
Plug the light/device you want to control into the receptacle located on the side of the app
timer. Make sure the light/device is set in the ON position. The app timer will not turn the
light/device on if the device is in the OFF position.
3
DOWNLOADING THE DEFIANT APP
□ Go the your Apple or Android smartphone App Store and download the free DEFIANT
TIMER app.
□ Launch the DEFIANT TIMER app on your smartphone or tablet and follow the on-screen
guide to add, control and program schedules.
4
USING THE APP
This gure shows the main screen of the DEFIANT
timer app with the following menu options.
1. on/off – This menu option overrides the current
timer programming to turn the connected device
on/off. The timer will follow the next scheduled
programmed time.
2. dusk to dawn – This menu option programs your
timer to turn on at dusk and off at dawn daily.
3. random – This menu option uses the
programmed time to turn on/off randomly to give
a “lived in” look while away.
4. program – This menu option sets up to 5
programs to turn your connected device on/off.
5. countdown – This menu option turns your
connected device on for up to 24 hours. The
timer will return to the next programmed time
afterwards.
6. clear – This menu option restores your timer and
app to default settings or clears the timer of all
programs.
program
clear
dusk to dawn
random
on / off
countdown
Daylight savings
1 2
8
4
6
7
3
5
7. Daylight saving – Slide to turn the Daylight Saving time feature on or off depending on if
your area observes daylight savings time.
8. Info icon – All screens on the DEFIANT app have an information page for additional
information and directions on using each menu option in the app.
5
PROGRAMMING THE APP TIMER
□ Connect the provided 3.5 mm jack to the app timer and your smartphone or tablet.
□ Send the programs created to the timer using the DEFIANT app.
□ Remove the jack when you are nished programming the app timer.
6
MANUAL OPERATION
To manually operate your connected light, slide the switch on the app timer from ON to OFF
as needed. When the timer is switched back to TIMER Mode, the next programmed
time will operate.
TIMER SETTING ACTION
Timer Runs Timer Programs
Off Always Off
On Always On
TIMER LED TIMER STATUS
Rapid Flashing LED
Timer is not programmed.
This is the default status.
Always ON
Timer is being programmed
by the DEFIANT TIMER APP.
Always OFF
Timer is programmed and
will run your on/off programs.
FCC NOTE
This device complies with part 15 of the FCC and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment. Such modications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
CAN ICES-3(B)/NMB-3(B)
TIMER OFF ON