One-Piece Toilet NOTE: Drawings may not exactly define contour of the product. www.deervalleybath.com | (+1) 312-626-9466 | service@ deervalleybath.
(+1) 312-626-9466 service@deervalleybath.
Putty Knife Water Supply Kit Wrench Tape Measure Flat Head Screwdriver Level Cross Screwdriver Push button, tank lid, water fitting, soft-close toilet seat, wax ring, bolts kit, bolt covers, installation instruction. The step-by-step guidelines in the installation instructions are a general reference for installing a DeerValley One-Piece Toilet. Should there be any discrepancies, DeerValley cannot be held liable. It is recommended to install all DeerValley Products by hiring a licensed professional.
1. Remove Old Toilet Turn off the water supply. Flush the toilet to empty the tank. Remove any water left in the tank or bowl. Disconnect the supply line from the tank. Remove decorative caps. Unscrew nuts that attach the toilet to the floor. Remove toilet. Make sure the water supply valve is shut off before installation. Remove old closet bolts from closet flange. Clean any old wax, putty, etc. from base area.
2. Install Closet Bolts Install closet bolts to flange channel, turn 90º and slide into place 6" (152mm) apart and parallel to wall. 3. Install Wax Ring Invert toilet on floor (use cushion to prevent damage), and install wax ring evenly around waste flange, with tapered end of ring facing toilet. Closet Flange 12” Closet Bolts Wax Ring 4. Position Toilet on Flange Lower the toilet onto the closet bolts, so the bolts project through mounting holes in base of toilet.
. Toilet Seat Installation DV-F816S01 Toilet Seat Installation Package (1) Accessories Unwrap the toilet seat installation package. (3) Adjust the Seat Position Plug the toilet seat in and adjust the position properly. or (2) Install Accessories Install the seat cover cap and hinge, then fasten the screws slightly and adjust the angle of the pins on the hinge.
DV-F812S01 Toilet Seat Installation Package (1) Accessories Unwrap the toilet seat installation package. (3) Adjust the Seat Position Plug the toilet seat in and adjust the position properly. (2) Install Accessories Install the toilet seat white base, then fasten the screws slightly and install the toilet seat. (4) Install the Seat Confirm the position of the toilet seat and take it out, fasten the screws to finally fix the toilet seat.
Phone: (+1) 312-626-9466 Address: 2645 Maricopa St Torrance, CA 90503 Email: service@deervalleybath.com Web: www.deervalleybath.com ONE YEAR LIMITED WARRANTY LIMITED WARRANTY COVERAGE 1 YEAR LIMITED WARRANTY DeerValley products are made with quality materials and excellent craftsmanship to provide the customers a long-lasting product.
