Instructions / Assembly

Components: Hardware
1. Bench Top:1 pc
2. Leg Panels:2 pcs
3. Crossbars:2 pcs
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Attach one leg panel onto the bottom of the bench top by using
2 long screws,2 big flat washers and 2 spring washers.
Bench Assembly Instruction
BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION CAREFULLY,
PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID ASSEMBLY DIFFICULTY.
Turn bench top upside down, so it is lying flat on the floor,
make sure the ground is clean and smooth.
long screws:4 pcs short screws:4 pcs allen key driver:2 pcs flat washers:8 pcs spring washers:4 pcs
IF SPILLAGE OCCURS WIPE CLEAN WITH SLIGHTLY DAMP CLOTH IMMEDIATELY.
Now turn the bench upright, the assembly is over.
Attach the other leg panel onto the bottom of the bench top by
using 2 long screws,2 big flat washers and 2 spring washers.
Attach the crossbars one by one to the leg panels by using 4
short screws and 4 small flat washers.
WARNINGS!