DOMYOS CONSOLE 3 - TECHNICAL SPECS - DOMYOS DOMYOS DOMYOS DOMYOS DOMYOS DOMYOS PROJECT NAME CONSOLE 3 - B ENERGY CONSOLE 3 - B ENERGY CN CONSOLE 3 BLACK CONSOLE 3 BLACK CN CONSOLE 3 BLACK R CONSOLE 3 BLACK R CN MODEL CODE 8363074 8369237 8368168 8369246 8368167 8369244 ITEM CODE 2067995 2112862 2101226 2112890 2101224 2112888 REVISION HISTORY 2020-07-27 2019-08-22 2018-02-15 2017-05-16 2016-03-07 2015-12-28 1. Add CMIIT_FCC_IC sticker 2. Add FCC Statement 3.
015-12-07 ORIGINAL DOCUMENT DATE 1 DESCRIPTION REVISION DIVRECHY Guillaume DIVRECHY AUTHOR TABLE OF CONTENTS 1. PRODUCT PROFILE ........................................................................................................... 3 1.1. 2. Introducing....................................................................................................................3 Standards of CONSOLE 3 .................................................................................................. 4 2.
1. PRODUCT PROFILE 1.1. Introducing Technical requirements of Domyos middle of range Console: DOMYOS CONSOLE 3 This console is connected thanks to Bluetooth Low energy protocol. This console can connect an APP with Android and Ios devices as to provide a new user experience.
2. Standards of CONSOLE 3 2.1. 2011/65/UE Directive “RoHs 2” 2.2. REACH directive 2.3. R&TTE directive 2.4. Temperature cycling test. Low temperature : (‐ 10 ± 2)° C during 10 min High temperature : (+60 ± 2)° C during 10 min Cycles : 50 Times 2.5. Temperature storage test. +60° C during 24 hours consecutive 2.6. ESD test. Air: ±12KV Contact: ±7KV Reports are inside PACE 3. USER-keyflow and Machine-Keyflow User-keyflow is the main keyflow used by end-customer. CONSOLE 3 Keyflow.
2. 3. 4. 5. The hardware version of the console Console total time of use Console total km of use Console serial number (see traceabilty paragraph) Machine-keyflow has also a unit-choice menu where end-user can change from Km to Miles. MachineMenu_CONS OLE3_V2.pdf DECATHLON CONTROL Firmware version is 1.
4. Electronic hardware 4.1. Electronic schematic Console 3 Hand Heart rate Schematic_DTC.pdf pulse_Schematic.pdf receiver_Schematic.pdf NEW SCHEMATIC DTC 2018 : Console 3_DTC Schematic_20180102.pdf 4.2. PCBA Console 3 PCBA_DTC.pdf Hand pulse_PCBA.pdf Heart rate receiver_PCBA.pdf NEW PCBA DTC 2018 : Console 3_DTC PCBA_20180102.pdf 4.3. Bill of Material Console 3 BOM_DTC.xls 4.4. Main EE components AT42QT1040.pdf 4.5. BM70BLE01FC2.pdf HT1632C.pdf PIC24FJ128GA106.
ACCEPTANCE CRITERIA Cables are correct. DECATHLON CONTROL Using CY hand-pulse sensor kit. For information hand-pulse monitoring is less accurate than chest-belt monitoring. Without tablet and smartphone put on the console tablet holder : Testing method as end-user case : a) put your hands on hand-pulse sensors jig b) waiting 30 seconds to get a stabilized value c) after these first 30 seconds, check if value fluctuation is under +/- 10bpm during 30 more seconds.
Remote control cable_ 2pin male jack 250mm.pdf (down resistance level) DECATHLON CONTROL Check the gender of each connector is correct. Functional test, increasing and descreasing the resistance level. ACCEPTANCE CRITERIA Gender is correct, function is ok.
5. Mechanical hardware 5.1. 2D drawings of consoles parts and assembly Console 3 assembly.pdf Console 3 front casing.pdf Console 3 PMMA.pdf Console 3 rear casing.pdf Console 3 rubber.pdf Console 3 tablet hook.pdf 5.2. Datasheet of the plastic parts ABS MSDS of ABS.pdf datasheet_AG15E1 for plastic.pdf 5.3. Glues datasheet (for PMMA and Rubber-pad) Glue specification for PMMA_English.pdf 5.4. MSDS of protection Rubber TAIRILAC film_770NB.pdf datasheet_F204-0021 TPR AG15E1_UL.pdf 70A.
DECATHLON CONTROL Cosmetic 1) 2) 3) 4) 5) 6) : Few scratches on protection film surface Protection film has no fold, no tear No scratches on PMMA surface No trace of glue on the edges of rubber and PMMA No trace of incrusted dust on plastic casing PMMA print is correct and clean (no drip, print is uniform, compliant with artwork) Assembly : 1) Casing is correctly clipped all around (<1mm of air gap between front and rear plastic casing) 2) PMMA stickness is correct (example of 4 hours temperature 70° C
6.
DECATHLON CONTROL Stickers are all here and stuck in the right position Important: For Chinese Version, CMIIT ID sticker has to be pasted near Bluetooth Name Sticker CMIIT ID check in this LINK Console serial number inside firmware must be compliant with serial number on traceability sticker (checking with Machine Keyflow menu) ACCEPTANCE CRITERIA Stickers are ok, traceability is ok
7. Chest-belt 7.1. Datasheet Chest belt specification.pdf DECATHLON CONTROL Using CY heart-rate simulator jig. Without tablet and smartphone put on the console tablet holder : Accuracy required is +/- 5 BPM value when signal is stabilized between the belt and the console. Fluctuation is +/- 3 BPM. Chest-belt horizontal, facing the front of Console 3 with a distance of 60cm.
8. Bluetooth specification 8.1. Technical specification under this [LINK] DECATHLON CONTROL Connect the Console 3 with CY testing APP with Android tablet AND Ios tablet. Activating one or two functions to check if bluetooth is working. Not necessary to check all the functions. ACCEPTANCE CRITERIA Bluetooth connection with Ios and Android are ok Important : CY APP is using the same bluetooth SDK as inside the end-user APP. The SDK is the bluetooth link between APP and Console.
9. CMIIT_FCC_IC Label CMIIT ID check in this LINK CMIIT_FCC_IC Label Documents CMIIT ID: 2016DP5352 9.1. FCC Statement FCC 15.21 Information to user Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC 15.105 Information to the user (Class B) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
