User's Manual

ManualsBrandsDDM Brands ManualsCell PhonesLTE mobile phone

Table of Contents

1.Foreword ............................................................. 2

2.Getting to know your touch phone................... 5

3.Starting up the device ........................................ 6

4.Introduce the basic phone function ................. 8

5.Technical Specifications ................................. 14

6.SAR .................................................. 16

Foreword

Safety

In order to ensure the phone is used safely and correctly, please

read the precautions below carefully before use.

1.1 General precaution

·Your phone is only suitable for the battery and charger

approved by our company or else it may cause the battery to

leak, overheat, explode or even catch fire.

·Do not knock, vibrate or throw the phone heavily to avoid

malfunction, fire, overheating, explosion or fire.

·If there are abnormal phenomena, like temperature rising, color

change or distortion during the usage, charging or storage of the

battery, please stop using it and replace it with a new battery.

·It may burn the skin if liquid in the battery leaks onto skin or

clothes. If this happens please flush with plenty of clean water

immediately and go to a hospital at once.

·Please keep the battery away from fire to avoid fire and

explosion if the battery leaks or emits a strange smell.

·Do not place expose the battery to moisture or it may cause

overheating, fumes and corrosion.

·Do not use or place the battery under direct sunlight, or in hot

places, it may cause leakage and overheating, thus reducing

performance and shortening the lifespan.

·Do not charge the battery for over 24 hours continuously.

·Use careful with the earphone maybe possible excessive sound

presure from earphones and headphones can cause hearing

loss.

1.2 Precaution for the use of charger

·Do not cause short circuit to the charger, or it may cause

electric shock, fumes and damage to the charger.

·Do not use the charger if the power wire is broken, or it may

cause fire and electric shock.

·Please remove accumulated dust on the power plug.

·Do not put water containers next to the power supply to avoid

overheating, fire, electric shock and malfunction in case they

come into contact.

·Do not disassemble or tamper with the charger or it may cause

personal injury, electric shock, fire and the damage of the

charger.

·Do not use the charger in places of high humidity, like

bathrooms, or it may cause electric shock, fire and damage of

charger.

Summary of content (8 pages)

PAGE 1
Table of Contents 1.Foreword ............................................................. 2 2.Getting to know your touch phone................... 5 3.Starting up the device ........................................ 6 4.Introduce the basic phone function ................. 8 5.Technical Specifications ................................. 14 6.SAR ..................................................
PAGE 2
·Do not touch the charger, power cord or power plug with wet hands or it can cause electric shock. ·Do not put heavy objects on the power cord or change the power cord or it may cause electric shock and fire. ·Please unplug the power socket before cleaning and maintenance. ·Please hold the charger to unplug the socket as pulling the power cord may damage the power wire and cause electric shock and fire. 1.
PAGE 3
Getting to know your touch phone Starting up the device To remove the back cover ·Make sure your device is turned off. ·Firmly hold the device with the front panel facing down. ·Slide your finger into the groove at the top of the phone and gently pull open the back cover. To install the SIM card ·Remove the battery if it is installed. ·Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out of the card slot as shown in the diagram.
PAGE 4
Warning: • Do not remove the battery from the device while you are charging it using the AC or car adapter. • As a safety precaution, the battery stops charging before it overheat Power on/off To power off your phone, press & hold POWER. On release, the Phone options menu opens. Select ‘Power off’ and confirm. To power on again, press & hold power Introduce the basic phone function 1.
PAGE 5
2. Home screen (1) Read your notifications When you see a notification in the status bar, touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window. Ongoing notifications report activities such as call forwarding ON, current call status, song playing. Notifications report the arrival of new messages, calendar events, and alarms. You can clear notifications list by selecting ‘Clear’ notifications at the top of the notifications window.
PAGE 6
4. GPRS/WLAN network Your device’s networking capabilities allow you to access the Internet or your corporate network through WLAN, GPRS, EDGE (if available) You can also add and set up a VPN or proxy connection. To use WLAN on your device, you need access to a wireless access point Note: The availability and range of your device’s WLAN signal depends on the number, infrastructure, and other objects through which the signal passes. To open the Browser you need to be connected to a network. 5.
PAGE 7
6. Music Your music is organized into four categories: Artists, Albums, Songs, and Play lists. Select a category to view the lists within each. Once in a category, keep selecting until you reach the music you want to play. 7. Bluetooth The phone supports Bluetooth(BT) functions, you can establish a wireless connection between the phone with other compatible devices, and data transmission, you can establish a wireless connection between devices in the phone with a distance of up to 10 meters.
PAGE 8
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. worn on the body)as required by the FCC.