9.7” E-Paper Display User Manual The contents of this manual will be modified without further notice. The operation temperature for the product is between 10℃~40℃. Operating or recharging in an environment with a temperature over 40℃ might cause the system to malfunction. However, this should be considered a normal phenomenon. Please do not operate under extreme temperatures.
Content Preface ............................................................................................................................................................................ 2 Safety Precautions ..................................................................................................................................................... 4 Package Content ......................................................................................................................................
Preface We appreciate your purchase the E-Paper Display (Model : EPD9700S) from DCI. Please read all instructions thoroughly for a full understanding of the products’ features. Note: The illustrations and images used in the manual are for reference only and may differ from the actual product.
Federal Communications Commission (FCC) Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety Precautions Select the install location must be cautiously. DCI will not bear any responsibility if the user does not follow the correct device installing procedure. Do not drop, puncture or disassemble the device; otherwise the warranty will be voided. Do not remove or replace the battery. Only well trained service personnel are allowed to disassemble/install the internal components.
Package Content 9.
Product Introduction Overview Front View Rear View Buzzer 6 E-Paper Display (EPD9700S) User Manual
Bottom View Power button Wi-Fi Setting Bluetooth Pairing Reset Key Type Description Power button Hold the power button for 5 seconds to turn on or turn off the device Wi-Fi Setting Press to trigger Bluetooth for Wi-Fi setting BT Pairing Reserved Reset Insert a stretched paperclip or a small pin into the hole and press it for a few seconds to reset the device Right View Micro USB Port (Support charging and data transmission) 7 E-Paper Display (EPD9700S) User Manual
Charging the battery Use the included micro USB cable to charge digital signage device or with any micro USB wall adapter (not included).
Product Specifications Model Dimension (L x W x H) Display Resolution Connection Wi-Fi BLE ZigBee NFC Flash Memory USB Battery Operating Temperature S97407 247.3x 196.5x 17.7 mm 9.7” e-paper display Color: Black/White/Red Color 1200x 825 (pixel) 2.4GHz IEEE 802.11 b/g/n Bluetooth Low Energy (BLE) 4.0 2.4GHz NFC Reader 8GB Micro USB Li-ion Polymer Battery 3.