DBTEL 22Mbps Wireless LAN Card Quick Installation Guide
Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Owner’s Record The model and serial numbers are located on the bottom of the product. Record the serial number in the space provided below. Refer to them whenever you call upon your DBTEL dealer regarding this product.
Avoid locations that are directly exposed to sunlight or heaters. Internal overheating could result in fire or damage to the unit. Do not insert any metallic objects inside the connectors. Short-circuiting the pins could cause fire or damage to the unit. Be careful to insert connectors squarely. Crooked insertion could cause pins to short-circuit, possibly causing fire or damage to the unit.
Installation First, insert DB6802 WLAN Card into the PCMCIA slot on your computer. Then the system detected your card Then the wizard wills popup automatically to help you to setup the device driver. Let’s press “Next”. Choose “Search for suitable driver for my device (recommended)” and then press “Next”. Choose “Specify a location” and then press “Next”.
Then screen will shows “Found New Hardware Wizard” and press “Browse” Select the CD-ROM device and it’s will shows “Config”, ”Drivers” and ”WLAN MENU files”. Please select Drivers and press “Open”. Next step is to select the operation system that you used. For example “WIN2K” then press open. Then it will display WIN2K driver file, please select it and press “Open”.
Here you can press “ok” to proceed the hardware installation. In Windows 2000 operation system, it’s will display “Digital Signature”. Please click “Yes” then continue to installation. When display next screen that you have successfully installed the driver for DB-6802 WLAN Card.
Utility Installation (1) Use RUN in the Start Menu to find Setup.exe and press “Browse”. (2) Then please select “Config” folder and press “open”. (3) Then you will find “Setup” and press “open” (4) Then the installation will operate and complete automatically.
When finish, there will appear an icon in right-bottom of your screen. You have successfully installed the utility. Create a new Configuration Click the right button on your mouse in the right hand corner of the screen. Then choose “TI-WLAN Configuration” Select “New Configuration” and then press “Next” button in this step. Here the system will display bellowing screen. Enter your “Wireless network’s SSID”, “BSS Type” and “Channel”.
Now, you have installed the WLAN PC Card successfully.
