User's Manual

Product Name: LCD FM Transmitter

Place of Origin: China

Specifications:

1) Frequency response: 20Hz - 20kHz

2) Separation: ≥50dB

3) Operating current: 50mA

4) Stand-by current: 90A

5) Transmission range: 88.1 - 107.9MHz (interval 0.1MHz)

6) Power source: 2 x AAA batteries or the car"s power source

7) Connecting cord length: 190mm

How to use:

1) Install the batteries (2 AAA batteries) or connect to the car's power source

2) Plug the FM transmitter into audio device's output port

3) Adjust the volume and frequency of the FM radio (avoid the transmission

points

of broadcasting stations)

4) Press the power button of FM transmitter, tune the transmission frequency

according to the reception frequency of FM radio (if the FM signal is

interrupted,please

set the frequency of FM transmitter and FM tuner to the other frequency)

5) Press ",M2,M3,M4" button for a few seconds until M0, M1, M2 to M9 is

shown on the LCD,so

that you can save the transmission frequency (if no battery on battery box,"no

PAGE 1
Product Name: LCD FM Transmitter Place of Origin: China Specifications: 1) Frequency response: 20Hz - 20kHz 2) Separation: ≥50dB 3) Operating current: 50mA 4) Stand-by current: 90A 5) Transmission range: 88.1 - 107.9MHz (interval 0.
PAGE 2
power" can keep the stock & stock for 10 years) Features: 1) High fidelity, stereo: this device can modulate the audio frequency signal of CD, MD,MP3, MP4, PDA, notebook, and PC to FM signal (88.1 - 107.9MHz). With the stereo tune you can enjoy listening to high quality music anywhere 2) Digital PLL: with Digital PLL, wave signal transmission and reception will not be affected even in places subject to extreme change in temperature.