High Performance Subwoofer Amplifier Model: SA230 User Manual daytonaudio.
Thank you for purchasing the Dayton Audio® SA230 subwoofer amplifier. Its tabletop design is compatible with many other popular electronic devices and multimedia furniture.
REAR PANEL: 5. High-Level Inputs Speaker level inputs terminated with binding post jacks that are compatible with banana-type plugs, bare wires, or spade terminals. These inputs facilitate connection of a full-range amplifier's speaker level output to the input of the subwoofer amp, using standard speaker wire. A mono signal is derived from the stereo source, which then feeds the subwoofer amplifier crossover input. 9.
SPECIFICATIONS: Rated Power Output: Signal to Noise Ratio: Input Impedance: Bass Boost: Low Pass Adjustment: Phase Adjustment: Gain: Dimensions: Power Requirements: Stand-by Power Rating: Weight: (1 % THD) 156 Watts RMS into 8 ohms, 233 Watts RMS into 4 ohms 85 dB A-weighted 12K ohms 25 Hz – 50 Hz 80 Hz – 180 Hz 0° – 180° 0 dB – +10 dB 17-1/4" W x 3-3/4" H x 13-7/8" D 120/240 VAC, 50 Hz/60 Hz 120V 0.82W 18 lbs.