User Guide

Cell Phone Tripod Adapter Instructions
Your tripod head attaches and releases with the lever on the tripod and the backside will have a
flathead screw that you tighten from the underside. (The extra 1/4 tripod screw has been included
as a bonus with the adapter you purchased, and you will need to remove/unscrew it before
attaching the adapter to your tripod). Tripod is not included in this purchase.
To attach it to the cell phone tripod adapter, use the release lever on the tripod itself that will
allow you to remove the tripod head that has the screw. Once you do this, tighten the screw on to
the cell phone tripod adapter threads.
Reattach the tripod head to the tripod with the cell phone adapter now attached by the screw. The
adapter is spring-loaded, so you can pull it open some (by pulling the rubber piece on top) to
insert your cell phone. Release the rubber grip piece. The adapter will put enough pressure on the
phone from the spring action to hold the cell phone in place on the tripod.