Manualshelf

User Guide

ManualsBrandsDaVoice ManualsAccessoriesCar Phone Mount - Cell Phone Holder for Car Windshield Compatible with iPhone X XS Max XR 8 Plus 7 Plus 6S Plus 6 Plus SE Samsung Galaxy S9, S8, S8 Plus, Note 8, S7, S6, S5, Google Pixel XL by DaVoice
12
Installation Instructions for using the DaVoice Smartphone Car Mount
1. Loosen both vertical and horizontal adjusting screws to allow easy
installation of the Smartphone adapter.
2. Connect the Smartphone adapter to the suction cup mount using the
standard 1/4” screw.
3. Install the suction cup mount to a smooth, CLEAN surface and press the
suction cup tab down. (Towards the mounting surface)
4. Adjust your phone position to the desired location and tighten all screws
securely, including the 1/4” adapter screw. (Numbers 1 and 2 in diagram)
The adapter is spring-loaded, so you can pull it open some (by pulling the rubber piece on top) to
insert your cell phone. Release the rubber grip piece. The adapter will put enough pressure on the
phone from the spring action to hold the cell phone in place on the car mount.

Summary of content (2 pages)