500151R01 DAVISCOMMS (S) PTE LTD MTD1000/Evaluation Kit User Guide Daviscomms Confidential
500151R01 DAVISCOMMS (S) PTE LTD Contents Preface 1 2 3 4 5 Page No.
500151R01 DAVISCOMMS (S) PTE LTD 1. System Overview 1.1 MTD1000 The MTD1000 is a small, economical and low cost, high quality multi-purpose GPS/ GSM tracking solution for personal and vehicle tracking. It can also be used as 2-way telemetry to control relays and transmit short messages. With battery embedded, it can remain on standby for at least 24 hours. It transmits the GPS data by using GPRS/SMS.
500151R01 DAVISCOMMS (S) PTE LTD 1.2 Family of options available for MTD1000 hardware configurations Model: MTD1000 - IE2N3F - Embedded GPS antenna. External GSM antenna Easy in-vehicle mounting flange installation option. Model: MTD1000 - EIDN3F - Embedded GSM/GPRS antenna. External GPS antenna Model: MTD1000 - IIDN3F - Embedded GSM/GPRS antenna Embedded GPS antenna Easy in-vehicle mounting flange installation option.
00151R01 DAVISCOMMS (S) PTE LTD 1.
500151R01 DAVISCOMMS (S) PTE LTD 1.4 Parts Description of MTD1000 GSM External Antenna Connector SMA (option) Mounting Flange (Option) GSM Indicator Panic Button (Option) GPS External Antenna Connector SMA (option) Charging Indicator GPS Indicator Power Connector DC Jack or 2pin (Option) Data Connector 3 Pin Li- Polymer connector (Male) SIM card insertion slot 3.
500151R01 DAVISCOMMS (S) PTE LTD 1.
500151R01 DAVISCOMMS (S) PTE LTD 2. Product Package Overview 2.1 MTD1000 Evaluation kit package description In the MTD1000 evaluation kit box, you will receive 10 items as described below. i. MTD1000 device (GSM/GPRS/ GPS) The communication device that processes the GSM/GPRS and GPS functions. ii. Power Adapter 1X Power adaptor (100 – 240V~ 50/60Hz 650mA Max) for the MTD1000 device 1X Power adaptor (100 – 240V~ 50/60Hz 650mA Max) for the evaluation kit Power DC jack dimension: 3.5mm*1.35 mm iii.
500151R01 DAVISCOMMS (S) PTE LTD vi. GSM/GPRS antenna (SMA right angle) The receiver component required to receive GSM/GPRS data to the MTD1000 device in a network cell location. vii. Li- Polymer battery for MTD1000 An alternative solution to power up the MTD1000 without a power adaptor up to 24 hours. Voltage/ current specification: (3.7V/ 780mAh) viii.
500151R01 DAVISCOMMS (S) PTE LTD 2.2 Installation and starting up on the MTD1000 Step 1 - Insert the SIM card (Not included in package) Connect the Li-Polymer battery to the into the MTD1000 Note: Do not use the internal Li-Ion battery beyond standard operating temperature of -10C to +50C. The MTD1000 can function directly from DC power supply adaptor without the internal LiIon battery. Step 2 Adjust the battery cover into the catch and slide it into the back cover latch fully.
500151R01 DAVISCOMMS (S) PTE LTD Step 3 Connect the GSM/GPRS antenna to the GSM External Antenna Connector. Screw in the SMA connector firmly. Step 4 Connect the GPS antenna to the GPS External Antenna Connector. Screw in the SMA connector firmly.
500151R01 DAVISCOMMS (S) PTE LTD Step 5 Connect this end to RS232 comport of PC An example of the MTD1000 hardware setup with the 10 pin data harness cable/ RS232 for AT command communications and firmware flashing.
500151R01 DAVISCOMMS (S) PTE LTD 2.3 LED indicators 2.3.1) RED LED (Charging Indicator) • Red LED constant on: • Li-ion battery is charging Red LED off: Charging completed Charge the battery by plugging in power adapter connector into the power connector of the unit. Use power adapter with similar or better ratings to prevent damage to the power adapter. If not sure, use only power adapter provided in the package. 2.3.
500151R01 DAVISCOMMS (S) PTE LTD 3. Interfacing the MTD1000 / Evaluation kit for AT commands communication 3.1 Hyper-terminal settings How to create a hyper-terminal connection from your PC to your device Step 1 On the Windows Start menu, select Run.... The Run dialog appears. The Windows Run Dialog Step 2 In the Open: field, type hypertrm.exe, and click OK. The HyperTerminal splash screen appears while HyperTerminal loads.
500151R01 DAVISCOMMS (S) PTE LTD Step 3 On the Connection Description screen, for Name type "Daviscomms" or any name you would prefer and select an icon for the definition, and click OK. The Connect to dialog appears. HyperTerminal Connection Description dialog Step 4 On the Connect To dialog, select your primary COM port (COM1 e.g. the example above) for the Connect using: field, and click OK. (The Country/region:, Area code: and Phone number: fields are not used.) The COM 1 Properties dialog appears.
500151R01 DAVISCOMMS (S) PTE LTD Step 5 At the COM 1 Properties dialog, make the following selections, and then click OK: • • • • • Bits per sec: 115200 Data bits: 8 Parity: none Stop bits: 1 Flow control: none HyperTerminal COM 1 Properties dialog Note The settings in the Hyper Terminal need to be set correctly; otherwise, strange-looking or garbage characters may show up on the screen.
500151R01 DAVISCOMMS (S) PTE LTD 3.2 Evaluation Kit 3.2.1 Evaluation kit usage description The evaluation kit is used for development purposes to test the MTD1000 unit on its functionalities on GSM/GPRS/GPS applications. You will not require to power up the evaluation kit if only for AT commands communication to the MTD-1000 unit. Configuring the jumpers requires the evaluation kit to be powered up by the external power adaptor 3.2.
500151R01 DAVISCOMMS (S) PTE LTD 3.3 Jumper pin orientation Pin 1 Pin 3 Pin 2 3.3.
500151R01 DAVISCOMMS (S) PTE LTD 3.3.2 Jumper default positions description 3.2.2.1 2 output port option: 1. JUP21 and JUP22 short PIN2 and PIN3 to make the Input Port 1 and Input Port 2 be pulled to +5V position 2. JUP11 and JUP12 short PIN2 and PIN3 to get MTD1000 to be ready of RS232 flow control function. 3. JUP13 and JUP14 PIN2 and PIN3 are shorted. 4. JUP15 PIN1 and PIN2 are shorted. JUP27 shorts PIN2 and PIN3. 5. JUP23, JUP24, JUP25 and JUP26 are opened. 3.2.2.2 3 output port option: 1.
500151R01 DAVISCOMMS (S) PTE LTD 4. Firmware Downloading 4.1 TR-800 GSM/GPRS Module Firmware Downloader There is NO need to perform the firmware download for the MTD1000 unit (unless requested by Daviscomms). The MTD1000 is already loaded with the latest firmware. However if require the follow steps in this section will show you how the process is being carried out. 4.
500151R01 DAVISCOMMS (S) PTE LTD Key in COM port number TR-800 PROGRAMMER Step 1: Enter your COM Port number. The default value is 1. The programmer will set the COM port to the following settings: COM Port Baud Rate = 115200 bps Data Bits = 8 Parity = None Stop Bit = 1 Flow Control = None Step 2: Browse for the m0 file (firmware file) to be programmed into the module. Ensure that the path and file name of the m0 file is correct before proceeding.
500151R01 DAVISCOMMS (S) PTE LTD Browser firmware file Click to begin programming Step 3: Click the “Download Target File” button to begin programming. Step 4: A new console window will be displayed as below: Step 5: Totally power off the Product and re-Power it up.
500151R01 DAVISCOMMS (S) PTE LTD Step 6: The flashing process will run automatically. Wait for the process to be completed. Note: Do not remove the module, power off the Product or close the TR-800 Programmer software during this period. Doing so might cause unforeseen damage to the module. Step 7: If the downloading is successful, a "Downloading Completed" window will be displayed as follow: If the downloading is not successful, a "Fail. Please Try Again" window will be displayed.
500151R01 DAVISCOMMS (S) PTE LTD 5. Terminology 5.1 GSM Global System for Mobile Communications. A digital cellular phone technology based on TDMA that is the predominant system in worldwide. 5.2 SIM CARD Subscriber Identity Module (SIM) smart card that contains user account information 5.3 GPS Global Positioning System, a worldwide MEO satellite navigational system formed by 24 satellites orbiting the earth and their corresponding receivers on the earth 5.
500151R01 DAVISCOMMS (S) PTE LTD 6. GSM Antenna GSM/GPRS/AMPS ANTENNA FOR AUTOMOBILE SPECIFICATION Vertical pattern Electrical Specification Product type GSM/ GPRS/AMPRS antenna BH015 Model Type Frequency 800/1900/900/1800Mhz Range 50 ohms Impedance 1:1:5 VSWR Gain 2.15db (Typical) Gain 2.
500151R01 DAVISCOMMS (S) PTE LTD Vertical pattern at 960Mhz Daviscomms Confidential Page 25 of 28
500151R01 DAVISCOMMS (S) PTE LTD Impedance circle diagram( Smith circle diagram Daviscomms Confidential Page 26 of 28
500151R01 DAVISCOMMS (S) PTE LTD Usage: Connecting the SMA connector which is at the end of the antenna with the equipment directly.
500151R01 DAVISCOMMS (S) PTE LTD Regulatory and Warning Information Radio Frequency Interface Requirements Tested To Comply With FCC Standards Note: This equipment has been tested and found to comply with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.