User Guide 1. General Information 1.1 Device Specification Dimension 86(L) X 61(W) X 21(H) mm Weight 110 grams Marking FCC, CE (in progress) Charger input I/P:5V DC 1.0A Battery 3.7V 1320mAh BR828P -POCSAG Alphanumeric Pager Device Info BR828PG -POCSAG Alphanumeric Pager with 2G/3G BR828PGT-POCSAG Alphanumeric Pager with 2G/3G & GPS BR828PGTW-POCSAG Alphanumeric Pager with 2G/3G,GPS & Wi-Fi Location tracking coordinates BR828PGT is by GPS. Wi-Fi positioning and messaging is added in BR828PGTW.
User Guide 1.
1.3 General Device Feature Large TFT color Display,2.2inch,320x240pixels Normal display : 6lines, up to 25 characters per line.
2. Additional Info 2.1 BR828 Configurator The user will receive the configurator software as a .zip file. - Run the configurator setup file and follow the installation instructions. If BR828 is used the configurator for the very first time, USB driver is needed to install. - The user can find the Br828 configurator driver installation setup guide in the software package. Br828 parameters can be programmed by “BR828 Configurator version X.XX”.
3. Getting Started 3.
3.2 Reset Button 3.3 Powering the device On & Off To Power ON - Press and hold the Right/Power key Initializing”. for 2 seconds, release and the device will power on with a screen that show the word “ The device will show the main screen once start up completes. To Power OFF - Press and hold the Right/Power key - Select to power off the device. for 2 seconds, release and a confirmation prompt will appear.
3.
Br828 Series User Guide 3.
3.
4. General Setting 4.1 Message (a) Receiving Messages When a new page/sms message is received, the device will sound alert and turn on the status LED (for 5 seconds). These messages will go into the page or sms message folder accordingly. If the message folder is full, the oldest message will be removed to make way for news messages. The new page/sms message will automatically be displayed on screen.
4.2 Clock (a) Date Setting - Select Menu>CLOCK>DATE SETTING>Set date value - Press < > Set date format - Press < > Set day, month or year - Press < > Set date value Choose to set. (b) Time Setting The device will have a real time clock that can be set by the user. In addition, if the GSM module is present, the device will attempt To obtain the clock and time zone information from the GSM signal.
(c) Alarm Setting Three independent alarms clock are available. Each alarm clock can be configured to run once only or to be repeated weekly. User can have choice of day of week for the alarm to repeat in, e.g. different time for weekdays and weekends. - Select MENU>CLOCK>ALARM> Set hour value - Press < > Set type of repeats - Press < > Select hour or minute (Select am/pm for 12 Hours) - Press < > Select time value. Choose to set.
4.3 Alert (a) Alert mode setting The device has four audio alert settings. They are: • Audio + vibration • Audio only • Vibrate only • Silent - Press < > Set audio, vibrate, silent mode Choose
4.4 Device Setting (a) Brightness Control - Select Menu> Device Setting > Brightness Level > Set the brightness level for the screen. - Press Up/Down key < > to adjust the brightness. (b) Volume level - Select Menu> Device Setting > Volume Level > Set the volume level for the device. - Press Up/Down key < > to adjust the volume. (c) Auto Lock - Select Menu> Device Setting > Auto Lock > Set timing for auto lock. - Press Up/Down key < > set time for keypad lock. - Choose < Select> to set the auto lock.
4.
5. BR828P -POCSAG Alphanumeric Pager The device will only receive page from the pre-defined CAPCODES and recognize the following message types. Page Messages - a page intended for a single pager or group of pagers. News Messages - broadcast of news and meant for all pagers 5.
5.2 Message Three message folders for BR828P. Page Messages - all page messages will go into this folder Archive Messages - any message from Page & News folder can be (manually) archive into this folder.
(b) Reply, Archive & Delete the page message - Select < OPTION> on the Message screen to choose , or . Note: Canned message reply feature is not available on Br828P. (c) Archive the page Message User can archive a page message and it will be moved to the Archive message folder. - Select < OPTION> on the Message screen to choose If the Archive message folder is full, it will display "archive folder full".
(e) News Filter News can filter out to avoid filling the news folder with unwanted news. Filtered news will not be received by the device. When a news is turned on, any new news will then be accepted and start going into the news folder. (f) Message setting - Select message setting for < Delete ALL Page> or < Delete ALL News>. Note* To prevent accidentally delete of message that need to be kept, the user should archive it to the archive folder. 5.3 Language Setting The language can be selected.
5.5 Keypad Program (1) Set pager password. - Select MENU> Device Setting>Keypad program> set pager password (6 digits) - Press up & down keys -Press left & right arrow keys to adjust the numbers for password. to go for another digit. Press to set the password. (2) Program pager capcode, pager source type and signal rate. - Select or
6. BR828PG -POCSAG Alphanumeric Pager with 2G/3G The device can be configured to make outgoing calls to predefined numbers. Up to 10 predefined numbers can be stored in the device. These numbers are separate from the incoming numbers. 6.1 Additional Device feature Canned message reply, up to 10 canned messages. Auto response message received/read and canned message reply by SMS/GPRS.
6.2 Message It will have 4 folders for the messages • SMS message folder- all SMS messages will go into this folder • Page message folder- all page messages will go into this folder • News message folder- all news messages will go into this folder • Archive message folder- any messages from Page and News message can be (manually) archive into this folder. (a) SMS & Page Message The device can receive SMS or Page messages.
(b) Reply, Archive & delete a Message - Select
If GSM is in OFF mode, the auto-acknowledgement will not be sent out. Instead it will be stored in Memory, pending for the GSM to come back on. Up to 5 auto-ack messages can be put in pending and if new auto-ack message comes in, the oldest pending message will be pushed out. Pending messages are stored in RAM and will not survive a power reset. 2. GSM ON/OFF Alert Message The device can be configured to get the alert message for GSM registered and GSM OFF mode. 3.
6.3 Phone (a) Incoming Call The device can be configured to accept any incoming calls or only predefined numbers. Up to 10 predefined numbers can be stored. The device can also be configured not to accept any incoming calls via the Configurator. - Press Left soft key to to the call. (b) Terminating a Call A call can be terminated via the End option RSK key. The call will also be terminated if panic alert is activated. - Press Right soft key to the call.
(e) Contacts Up to 10 predefined numbers can be stored in the device. Outgoing Call / SMS reply -Select
6.4 GSM Module feature GSM OFF Mode The device can turn ON and OFF the GSM Module. GSM OFF mode is to off all wireless transmit. - Press and hold the Left Soft Key for 2 seconds to switch to GSM OFF mode in Main screen. 6.5 SOS SOS (Manual) On SOS button triggering, a pop up message will appear for visual feedback. And the device has a short vibration for tactile feedback. The device will send the satellite report with SOS alert indication to the web server.
7. BR828PGT-POCSAG Alphanumeric Pager with 2G/3G & GPS BR828PGT has GPS feature to report its location on demand via Daviscomms Tracking Server. 7.1 Additional GPS Feature Location tracking Map Link URL via SMS Geo-fencing 7.2 Location Tracking Auto tracking - To set the tracking, enable auto tracking with time interval via configurator. 7.3 Map Link URL via SMS Program Map Link URL via configurator. Set alias command via configurator, to get SMS reply for map link URL with current location. 7.
8. BR828PGTW-POCSAG Alphanumeric Pager with 2G/3G,GPS & Wi-Fi BR828PGTW has wireless protocol. 8.1 Additional Wi-Fi Feature Wi-Fi Messaging Wi-Fi Positioning 8.2 Wi-Fi Messaging Send and receive messages from Wi-Fi messaging center via Daviscomms Tracking Server Wi-Fi messaging server setting via configurator - IP address and port Access Point setting via configurator - SSID, Passphrase and Security type 8.3 Wi-Fi Positioning Locate the device inside the building.
Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.