Installation Instructions

ManualsBrandsDavisBrain Intelligent Electric Beijing ManualsElectronicsIntelligent central control panel

Instructions for intelligent central control

room platform

 For better experience, please read the instruction carefully and keep

it for reference before use.

 Since the product may be upgraded from time to time, the

illustration of this instruction may be different from the real product.

Please refer to the real product.

 Must strictly follow the warnings and prompts of the machine and

instructions.

 For more information, please visit our website：www.davisbrain.com

This product has passed the following certification

 National mandatory product 3C certification

 European CE safety certification

 the United States FCC certification

 European Union RoHS environmental certification

、

Safety and attention

Improper use can lead to electric shock or fire accidents.To prevent dangerous

situations, please follow the instructions below when installing, using and cleaning

the machine.To ensure your safety and the service life of the equipment, please read

the following safety precautions carefully.

Summary of content (16 pages)

PAGE 1
Instructions for intelligent central control room platform  For better experience, please read the instruction carefully and keep it for reference before use.  Since the product may be upgraded from time to time, the illustration of this instruction may be different from the real product. Please refer to the real product.  Must strictly follow the warnings and prompts of the machine and instructions.  For more information, please visit our website：www.davisbrain.
PAGE 2
1.1 Attention and warning  There is high pressure inside the machine. Non-professionals should not open the back cover to prevent electric shock.  To avoid product damage, do not use the unit during thunderstorms, lightning or long periods of non-use, and remove the power plug, antenna or wire loop.  Warning instructions for dangerous live terminals and connection of dangerous live terminals.
PAGE 3
1.3 Use and cleaning  Do not use liquid cleaner or spray cleaner when cleaning.  Because the surface layer of the display screen is easy to be scratched, when users clean the surface of the display screen, remember not to wipe with a wet cloth, otherwise it will cause damage to the display screen, the replacement cost is very high.  When cleaning, please use a clean soft cloth or special lens wipe cloth.
PAGE 4
 First, insert two plugs of the equipment into two corresponding plugs of the box body. Micro USB interface and DC power cord interface on the back of the device panel. Connect the two wires to the corresponding interface before fixing the panel to the wall.
PAGE 5
MicroUSB contact DC contact  Secure the equipment frame to the housing with the attached four screws.
PAGE 6
4、 equipment operation 4.
PAGE 7
PAGE 8
4.
PAGE 9
4.3、Functional operation 4.3.1、Main interface introduction main interface Main interface of the device, operate with the remote control, as shown in the green checkbox selected by the remote control.
PAGE 10
Control the selection by using the direction key on the remote control, and by clicking the confirm key on the remote control. setup menu 4.3.1、Equipment binding For the first time, bind the device to the mobile APP 1.
PAGE 11
2. Main device Settings menu→Equipment binding→The main device turns on the wifi hotspot,The device hotspot name is DavisBrain→Mobile phone end switch connection device hot. 3. Enter the "add device" page, click "next" to enter the wireless network connection interface, click the name and password of the wireless network to be connected, and click "connect WIFI" to wait for the device to connect to WIFI.
PAGE 12
4. The device connects successfully and binds to the phone. At this time, the mobile phone can check the data and information of the device at any time and accept the abnormal alarm of the device.
PAGE 13
4.3.1、Bind from account From the control account by the master account sent invitation code (or two-dimensional code) for binding. After the invited account gets the invitation code, click "connect family sharing device" - choose to use the qr code or invite to connect. 4.3.2、remove binding Click "unbind" to unbind the device. explain 1. Master account can choose to unbind its own binding state and invited slave account binding state. 2. From the control account can choose to unbind their state. 3.
PAGE 14
Product Parameter MCP highest frequency internal storage flash memory audio output Display sharpness of separation network bluetooth operating system power supply mode Battery Memory card type USB AMLOGIC-M802 2GHZ 2G DDR3 8G Left and right channel stereo 13.1 inch LED 1920*1080 Wireless 2.4G or 5G WIF Internet Bluetooth 4.0 ANDROID4.4 DC 12V/2A input 3000mA 7.
PAGE 15
after-sales service If you encounter any trouble in the process of reusing, please do not disassemble the machine by yourself and contact the customer service center or dealer immediately phone：010-67899080，010-67892620 mail：davisbrain@davisbrain.com Website：www.davisbrain.
PAGE 16
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.